- use DMA_32BIT_MASK.
- Rename tuner structures fields.
- Tail spaces removed.
- I2C cleanups and converged to a basic reference structure.
- Removed unused structures.
- Removed BTTV version check.
Signed-off-by: <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-Off-By: Nickolay V. Shmyrev <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
linux/drivers/media/video/bttv-cards.c | 110 ++----------------------
linux/drivers/media/video/bttv-driver.c | 19 ----
linux/drivers/media/video/bttv-i2c.c | 26 ++++-
linux/drivers/media/video/bttv-risc.c | 9 -
4 files changed, 35 insertions(+), 129 deletions(-)
diff -u linux-2.6.13/drivers/media/video/bttv-driver.c linux/drivers/media/video/bttv-driver.c
--- linux-2.6.13/drivers/media/video/bttv-driver.c 2005-07-06 00:46:33.000000000 -0300
+++ linux/drivers/media/video/bttv-driver.c 2005-07-07 18:25:52.000000000 -0300
@@ -1,5 +1,5 @@
/*
- $Id: bttv-driver.c,v 1.40 2005/06/16 21:38:45 nsh Exp $
+ $Id: bttv-driver.c,v 1.42 2005/07/05 17:37:35 nsh Exp $
bttv - Bt848 frame grabber driver
@@ -35,6 +35,7 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/byteorder.h>
@@ -698,12 +699,10 @@
static
void free_btres(struct bttv *btv, struct bttv_fh *fh, int bits)
{
-#if 1 /* DEBUG */
if ((fh->resources & bits) != bits) {
/* trying to free ressources not allocated by us ... */
printk("bttv: BUG! (btres)\n");
}
-#endif
down(&btv->reslock);
fh->resources &= ~bits;
btv->resources &= ~bits;
@@ -943,11 +942,6 @@
i2c_mux = mux = (btv->audio & AUDIO_MUTE) ? AUDIO_OFF : btv->audio;
if (btv->opt_automute && !signal && !btv->radio_user)
mux = AUDIO_OFF;
-#if 0
- printk("bttv%d: amux: mode=%d audio=%d signal=%s mux=%d/%d irq=%s\n",
- btv->c.nr, mode, btv->audio, signal ? "yes" : "no",
- mux, i2c_mux, in_interrupt() ? "yes" : "no");
-#endif
val = bttv_tvcards[btv->c.type].audiomux[mux];
gpio_bits(bttv_tvcards[btv->c.type].gpiomask,val);
@@ -994,11 +988,6 @@
case BTTV_VOODOOTV_FM:
bttv_tda9880_setnorm(btv,norm);
break;
-#if 0
- case BTTV_OSPREY540:
- osprey_540_set_norm(btv,norm);
- break;
-#endif
}
return 0;
}
@@ -1849,7 +1838,7 @@
if (unlikely(f->tuner != 0))
return -EINVAL;
- if (unlikely(f->type != V4L2_TUNER_ANALOG_TV))
+ if (unlikely (f->type != V4L2_TUNER_ANALOG_TV))
return -EINVAL;
down(&btv->lock);
btv->freq = f->frequency;
@@ -3865,7 +3854,7 @@
btv->c.nr);
return -EIO;
}
- if (pci_set_dma_mask(dev, 0xffffffff)) {
+ if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "bttv%d: No suitable DMA available.\n",
btv->c.nr);
return -EIO;
diff -u linux-2.6.13/drivers/media/video/bttv-cards.c linux/drivers/media/video/bttv-cards.c
--- linux-2.6.13/drivers/media/video/bttv-cards.c 2005-07-06 00:46:33.000000000 -0300
+++ linux/drivers/media/video/bttv-cards.c 2005-07-07 18:25:52.000000000 -0300
@@ -1,5 +1,5 @@
/*
- $Id: bttv-cards.c,v 1.49 2005/06/10 17:20:24 mchehab Exp $
+ $Id: bttv-cards.c,v 1.53 2005/07/05 17:37:35 nsh Exp $
bttv-cards.c
@@ -39,9 +39,6 @@
#include <asm/io.h>
#include "bttvp.h"
-#if 0 /* not working yet */
-#include "bt832.h"
-#endif
/* fwd decl */
static void boot_msp34xx(struct bttv *btv, int pin);
@@ -513,13 +510,8 @@
.svhs = 2,
.gpiomask = 0x01fe00,
.muxsel = { 2, 3, 1, 1},
-#if 0
- // old
- .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
-#else
// 2003-10-20 by "Anton A. Arapov" <[email protected]>
.audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
-#endif
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
@@ -766,14 +758,9 @@
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
-#if 0
- .gpiomask = 0xc33000,
- .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
-#else
/* Alexander Varakin <[email protected]> [stereo version] */
.gpiomask = 0xb33000,
.audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
-#endif
/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
gpio23 -- hef4052:nEnable (0x800000)
gpio12 -- hef4052:A1
@@ -1603,20 +1590,11 @@
.video_inputs = 4,
.audio_inputs = 1,
.tuner = -1,
-#if 0 /* TODO ... */
- .svhs = OSPREY540_SVID_ANALOG,
- .muxsel = { [OSPREY540_COMP_ANALOG] = 2,
- [OSPREY540_SVID_ANALOG] = 3, },
-#endif
.pll = PLL_28,
.tuner_type = -1,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
-#if 0 /* TODO ... */
- .muxsel_hook = osprey_540_muxsel,
- .picture_hook = osprey_540_set_picture,
-#endif
},{
/* ---- card 0x5C ---------------------------------- */
@@ -2546,21 +2524,12 @@
btaor((2)<<5, ~(3<<5), BT848_IFORM);
gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
-#if 0
- /* svhs */
- /* wake chroma ADC */
- btand(~BT848_ADC_C_SLEEP, BT848_ADC);
- /* set to YC video */
- btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
- btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
-#else
/* composite */
/* set chroma ADC to sleep */
btor(BT848_ADC_C_SLEEP, BT848_ADC);
/* set to composite video */
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
-#endif
/* switch sync drive off */
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
@@ -2813,10 +2782,18 @@
btv->tuner_type = tuner[btv->c.nr];
printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
if (btv->pinnacle_id != UNSET)
- bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
+ bttv_call_i2c_clients(btv, AUDC_CONFIG_PINNACLE,
&btv->pinnacle_id);
- if (btv->tuner_type != UNSET)
- bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
+ if (btv->tuner_type != UNSET) {
+ struct tuner_setup tun_setup;
+
+ tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
+ tun_setup.type = btv->tuner_type;
+ tun_setup.addr = ADDR_UNSET;
+
+ bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
+ }
+
btv->svhs = bttv_tvcards[btv->c.type].svhs;
if (svhs[btv->c.nr] != UNSET)
btv->svhs = svhs[btv->c.nr];
@@ -3125,14 +3102,6 @@
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_FM1216ME_MK3 };
-#if 0
-int tuner_0_fm_table[] = {
- PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
- PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
- PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
- PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
- PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
-#endif
static int tuner_1_table[] = {
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
@@ -3218,36 +3187,6 @@
static void __devinit boot_bt832(struct bttv *btv)
{
-#if 0 /* not working yet */
- int resetbit=0;
-
- switch (btv->c.type) {
- case BTTV_PXELVWPLTVPAK:
- resetbit = 0x400000;
- break;
- case BTTV_MODTEC_205:
- resetbit = 1<<9;
- break;
- default:
- BUG();
- }
-
- request_module("bt832");
- bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
-
- printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->c.nr,resetbit);
- gpio_write(0);
- gpio_inout(resetbit, resetbit);
- udelay(5);
- gpio_bits(resetbit, resetbit);
- udelay(5);
- gpio_bits(resetbit, 0);
- udelay(5);
-
- // bt832 on pixelview changes from i2c 0x8a to 0x88 after
- // being reset as above. So we must follow by this:
- bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
-#endif
}
/* ----------------------------------------------------------------------- */
@@ -3572,11 +3511,6 @@
{
dprintk("tea5757_set_freq %d\n",freq);
tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
-#if 0
- /* breaks Miro PCTV */
- value = tea5757_read(btv);
- dprintk("bttv%d: tea5757 readback=0x%x\n",btv->c.nr,value);
-#endif
}
@@ -3656,13 +3590,8 @@
{
unsigned int val, con;
-#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
if (btv->radio_user)
return;
-#else
- if (btv->radio)
- return;
-#endif
val = gpio_read();
if (set) {
@@ -3851,13 +3780,8 @@
{
unsigned int val = 0;
-#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
if (btv->radio_user)
return;
-#else
- if (btv->radio)
- return;
-#endif
if (set) {
if (v->mode & VIDEO_SOUND_MONO) {
@@ -3888,13 +3812,8 @@
{
unsigned int val = 0xffff;
-#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
if (btv->radio_user)
return;
-#else
- if (btv->radio)
- return;
-#endif
if (set) {
if (v->mode & VIDEO_SOUND_MONO) {
val = 0x0000;
@@ -4371,11 +4290,6 @@
latency = 0x0A;
#endif
-#if 0
- /* print which chipset we have */
- while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
- printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev));
-#endif
/* print warnings about any quirks found */
if (triton1)
diff -u linux-2.6.13/drivers/media/video/bttv-risc.c linux/drivers/media/video/bttv-risc.c
--- linux-2.6.13/drivers/media/video/bttv-risc.c 2005-07-06 00:46:33.000000000 -0300
+++ linux/drivers/media/video/bttv-risc.c 2005-07-07 18:25:52.000000000 -0300
@@ -334,10 +334,6 @@
}
vdelay = tvnorm->vdelay;
-#if 0 /* FIXME */
- if (vdelay < btv->vbi.lines*2)
- vdelay = btv->vbi.lines*2;
-#endif
xsf = (width*scaledtwidth)/swidth;
geo->hscale = ((totalwidth*4096UL)/xsf-4096);
@@ -776,13 +772,8 @@
bttv_risc_overlay(btv, &buf->bottom, fmt, ov, 0, 0);
break;
case V4L2_FIELD_INTERLACED:
-#if 0
- bttv_risc_overlay(btv, &buf->top, fmt, ov, 1, 0);
- bttv_risc_overlay(btv, &buf->bottom, fmt, ov, 0, 1);
-#else
bttv_risc_overlay(btv, &buf->top, fmt, ov, 0, 1);
bttv_risc_overlay(btv, &buf->bottom, fmt, ov, 1, 0);
-#endif
break;
default:
BUG();
diff -u linux-2.6.13/drivers/media/video/bttv-i2c.c linux/drivers/media/video/bttv-i2c.c
--- linux-2.6.13/drivers/media/video/bttv-i2c.c 2005-07-06 00:46:33.000000000 -0300
+++ linux/drivers/media/video/bttv-i2c.c 2005-07-07 18:25:52.000000000 -0300
@@ -1,5 +1,5 @@
/*
- $Id: bttv-i2c.c,v 1.21 2005/06/10 17:20:24 mchehab Exp $
+ $Id: bttv-i2c.c,v 1.25 2005/07/05 17:37:35 nsh Exp $
bttv-i2c.c -- all the i2c code is here
@@ -295,14 +295,26 @@
{
struct bttv *btv = i2c_get_adapdata(client->adapter);
- if (btv->tuner_type != UNSET)
- bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
+ if (bttv_debug)
+ printk(KERN_DEBUG "bttv%d: %s i2c attach [addr=0x%x,client=%s]\n",
+ btv->c.nr,client->driver->name,client->addr,
+ i2c_clientname(client));
+ if (!client->driver->command)
+ return 0;
+
+ if (btv->tuner_type != UNSET) {
+ struct tuner_setup tun_setup;
+
+ tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
+ tun_setup.type = btv->tuner_type;
+ tun_setup.addr = ADDR_UNSET;
+
+ client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup);
+ }
+
if (btv->pinnacle_id != UNSET)
- bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
+ client->driver->command(client,AUDC_CONFIG_PINNACLE,
&btv->pinnacle_id);
- if (bttv_debug)
- printk("bttv%d: i2c attach [client=%s]\n",
- btv->c.nr, i2c_clientname(client));
return 0;
}
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|