Hi! I got some weird badness on two Dell PowerEdge 2850 (64-bit SMP Xeon) boxes. One of them is all identical with one that runs ok, so I attached that one's ksymoops information in this message. The one that works just fine was installed locally (iirc) so this may be an issue with Dell's Remote Administration Console's VGA console redirection and its emulation of USB for input, maybe? My first guess was just hardware failure, but it's a bit unlikely on two boxes, especially now that I installed the boxes with a 32-bit kernel and everything's fine. Needless to say both I and the customer would want the 64-bit one working :) The boxes are situated some 3000km from here so getting hard forensics is kind of hard, but the Dell system can do a bit, so please let me know ASAP if there's something more I can try out. Any ideas on why box number one works but these two don't? "Sunspots and lunar positions" is not a good theory ;) I put up everything I could easily dig out on http://mjt.nysv.org/kernelbugfest/ It's just that the boxes don't boot far, as they get stuck in that suspend/wakeup loop, so there's only one really complete oops decode there from the identical working setup. Thanks! -- mjt
ksymoops 2.4.9 on x86_64 2.6.11.8-ck7server-smpnice2-em64t. Options used -V (default) -k /proc/kallsyms (specified) -l /proc/modules (default) -o /lib/modules/2.6.11.8-ck7server-smpnice2-em64t/ (default) -m /boot/System.map-2.6.11.8-ck7server-smpnice2-em64t (default) Warning (read_ksyms): no kernel symbols in ksyms, is /proc/kallsyms a valid ksyms file? No modules in ksyms, skipping objects No ksyms, skipping lsmod Kernel BUG at traps:324 invalid operand: 0000 [1] SMP CPU 1 Pid: 633, comm: khubd Not tainted 2.6.11.8-ck7server-smpnice2-em64t RIP: 0010:[<ffffffff8010fa0a>] <ffffffff8010fa0a>{out_of_line_bug+0} Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64 RSP: 0018:ffff81013e725bd0 EFLAGS: 00010206 RAX: ffffffff00000000 RBX: ffff8100062841c0 RCX: 0000000000000040 RDX: 000000013f711780 RSI: ffff8100bfd58070 RDI: ffff8100062841c0 RBP: 000000013f711740 R08: 0000000000000040 R09: 00000000000003e8 R10: 0000000000000000 R11: 0000000000000002 R12: ffff810138e9fc00 R13: 0000000000000292 R14: ffff81013a125468 R15: 0000000000000010 FS: 00002aaaaae00640(0000) GS:ffffffff805fc200(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00002aaaaac6c640 CR3: 000000013a8b3000 CR4: 00000000000006e0 Stack: ffffffff8800fd7a 0000000300000000 <4>ffff8100062841c0 ffff81013a125400 0000000000000002 <4>0000000000000010 uhci_hcd 0000:00:1d.2: irq 18, io base 0xbca0 0000000000000000 <4>0000000080000080 ffffffff8801088d uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 ffffffff805b8343 <4> Call Trace:uhci_hcd 0000:00:1d.2: detected 2 ports <ffffffff8800fd7a>{:usbcore:hcd_submit_urb+460}<4> usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <ffffffff8801088d>{:usbcore:usb_submit_urb+847}<4> <ffffffff88010ad5>{:usbcore:usb_start_wait_urb+88}<4> <ffffffff80124f27>{vprintk+323}<4> <ffffffff80124ddc>{printk+141} <ffffffff88010c55>{:usbcore:usb_internal_control_msg+137}usb usb3: hotplug <ffffffff88010d13>{:usbcore:usb_control_msg+143}<4> usb 3-0:1.0: hotplug <ffffffff8800d53f>{:usbcore:hub_port_init+627}<4> <ffffffff8023711d>{kobject_get+18}<4> hub 3-0:1.0: USB hub found <ffffffff8800dc4f>{:usbcore:hub_port_connect_change+535}<4> <4><ffffffff8800e249>{:usbcore:hub_events+955}<4> hub 3-0:1.0: individual port over-current protection <ffffffff8800e37d>{:usbcore:hub_thread+37}<4> <ffffffff80139509>{autoremove_wake_function+0}<4> hub 3-0:1.0: local power source is good <ffffffff8011e999>{finish_task_switch+64} <ffffffff80139509>{autoremove_wake_function+0} <ffffffff8011ea00>{schedule_tail+17} <ffffffff8010eeb3>{child_rip+8} <ffffffff8800e358>{:usbcore:hub_thread+0} <ffffffff8010eeab>{child_rip+0} Code: 0f 0b a3 fd 3d 80 ff ff ff ff 44 01 c3 8b 35 87 60 4a 00 53 >>RIP; ffffffff8010fa0a <out_of_line_bug+0/d> <===== Trace; ffffffff8800fd7a <_end+79d9d7a/7efca000> Trace; ffffffff8801088d <_end+79da88d/7efca000> Trace; ffffffff88010ad5 <_end+79daad5/7efca000> Trace; ffffffff80124f27 <vprintk+143/14a> Trace; ffffffff88010c55 <_end+79dac55/7efca000> Trace; ffffffff88010d13 <_end+79dad13/7efca000> Trace; ffffffff8800d53f <_end+79d753f/7efca000> Trace; ffffffff8023711d <kobject_get+12/17> Trace; ffffffff8800dc4f <_end+79d7c4f/7efca000> Trace; ffffffff8800e249 <_end+79d8249/7efca000> Trace; ffffffff8800e37d <_end+79d837d/7efca000> Trace; ffffffff80139509 <autoremove_wake_function+0/2e> Trace; ffffffff8011e999 <finish_task_switch+40/96> Trace; ffffffff80139509 <autoremove_wake_function+0/2e> Trace; ffffffff8010eeb3 <child_rip+8/11> Trace; ffffffff8010eeab <child_rip+0/11> Code; ffffffff8010fa0a <out_of_line_bug+0/d> 0000000000000000 <_RIP>: Code; ffffffff8010fa0a <out_of_line_bug+0/d> <===== 0: 0f 0b ud2a <===== Code; ffffffff8010fa0c <out_of_line_bug+2/d> 2: a3 fd 3d 80 ff ff ff mov %eax,0x44ffffffff803dfd Code; ffffffff8010fa13 <out_of_line_bug+9/d> 9: ff 44 Code; ffffffff8010fa15 <out_of_line_bug+b/d> b: 01 c3 add %eax,%ebx Code; ffffffff8010fa17 <oops_begin+0/91> d: 8b 35 87 60 4a 00 mov 4874375(%rip),%esi # 4a609a <_RIP+0x4a609a> Code; ffffffff8010fa1d <oops_begin+6/91> 13: 53 push %rbx Call Trace:<ffffffff80275f7d>{poke_blanked_console+63} <ffffffff802750a5>{vt_console_print+715} <ffffffff80124ad3>{__call_console_drivers+71} <ffffffff80124c23>{call_console_drivers+232} <ffffffff80125013>{release_console_sem+90} <ffffffff80124f16>{vprintk+306} <ffffffff80124ddc>{printk+141} <ffffffff88010d1d>{:usbcore:usb_control_msg+153} <ffffffff8800b400>{:usbcore:get_hub_status+72} <ffffffff88011a4f>{:usbcore:usb_get_status+130} <ffffffff8800b9d2>{:usbcore:hub_hub_status+46} <ffffffff8800c0d1>{:usbcore:hub_configure+1672} <ffffffff8800c563>{:usbcore:hub_probe+402} <ffffffff8800a0d2>{:usbcore:usb_probe_interface+204} <ffffffff80281ef6>{driver_probe_device+78} <ffffffff80281f78>{device_attach+84} <ffffffff8028224b>{bus_add_device+97} <ffffffff80281198>{device_add+149} <ffffffff88012432>{:usbcore:usb_set_configuration+984} <ffffffff80195c04>{sysfs_make_dirent+41} <ffffffff8800ccc2>{:usbcore:usb_new_device+369} <ffffffff8800f6e4>{:usbcore:usb_register_root_hub+241} <ffffffff88046294>{:ehci_hcd:ehci_start+1105} <ffffffff8801848f>{:usbcore:usbfs_add_bus+176} <ffffffff88014734>{:usbcore:usb_hcd_pci_probe+1220} <ffffffff8023fa2f>{pci_device_probe_static+62} <ffffffff8023fa7d>{__pci_device_probe+42} <ffffffff8023facd>{pci_device_probe+48} <ffffffff80281ef6>{driver_probe_device+78} <ffffffff80282002>{driver_attach+69} <ffffffff8028247f>{bus_add_driver+140} <ffffffff8023fd3b>{pci_register_driver+132} <ffffffff8013d5c2>{sys_init_module+299} <ffffffff8010e1d6>{system_call+126} Warning (Oops_read): Code line not seen, dumping what data is available Trace; ffffffff80275f7d <poke_blanked_console+3f/be> Trace; ffffffff80124ad3 <__call_console_drivers+47/55> Trace; ffffffff80125013 <release_console_sem+5a/df> Trace; ffffffff80124ddc <printk+8d/95> Trace; ffffffff8800b400 <_end+79d5400/7efca000> Trace; ffffffff8800b9d2 <_end+79d59d2/7efca000> Trace; ffffffff8800c563 <_end+79d6563/7efca000> Trace; ffffffff80281ef6 <driver_probe_device+4e/7c> Trace; ffffffff8028224b <bus_add_device+61/a4> Trace; ffffffff88012432 <_end+79dc432/7efca000> Trace; ffffffff80195c04 <sysfs_make_dirent+29/a2> Trace; ffffffff8800f6e4 <_end+79d96e4/7efca000> Trace; ffffffff88046294 <_end+7a10294/7efca000> Trace; ffffffff88014734 <_end+79de734/7efca000> Trace; ffffffff8023fa2f <pci_device_probe_static+3e/62> Trace; ffffffff8023facd <pci_device_probe+30/50> Trace; ffffffff80282002 <driver_attach+45/7f> Trace; ffffffff8023fd3b <pci_register_driver+84/a4> Trace; ffffffff8010e1d6 <system_call+7e/83> 2 warnings issued. Results may not be reliable.
Attachment:
signature.asc
Description: Digital signature
- Follow-Ups:
- Re: USB bugs in 2.6.11.8, 2.6.11.10 and 2.6.12.2
- From: [email protected] (Markus Törnqvist)
- Re: USB bugs in 2.6.11.8, 2.6.11.10 and 2.6.12.2
- Prev by Date: Re: Head parking (was: IBM HDAPS things are looking up)
- Next by Date: Re: [PATCH] [37/48] Suspend2 2.1.9.8 for 2.6.12: 613-pageflags.patch
- Previous by thread: [PATCH] reset real_timer target on exec leader change
- Next by thread: Re: USB bugs in 2.6.11.8, 2.6.11.10 and 2.6.12.2
- Index(es):