- Fix bug in lgdt3302_read_status to return correct
FE_HAS_SIGNAL and FS_HAS_CARRIER status.
- Removed #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10).
Signed-off-by: Mac Michaels <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
--
Michael Krufky
- Fix bug in lgdt3302_read_status to return correct
FE_HAS_SIGNAL and FS_HAS_CARRIER status.
- Removed #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10).
Signed-off-by: Mac Michaels <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
linux/drivers/media/dvb/frontends/lgdt3302.c | 43 +++++++------------
1 files changed, 18 insertions(+), 25 deletions(-)
diff -u linux-2.6.13/drivers/media/dvb/frontends/lgdt3302.c linux/drivers/media/dvb/frontends/lgdt3302.c
--- linux-2.6.13/drivers/media/dvb/frontends/lgdt3302.c 2005-07-06 22:32:22.000000000 +0000
+++ linux/drivers/media/dvb/frontends/lgdt3302.c 2005-07-06 23:53:06.000000000 +0000
@@ -1,5 +1,5 @@
/*
- * $Id: lgdt3302.c,v 1.2 2005/06/28 23:50:48 mkrufky Exp $
+ * $Id: lgdt3302.c,v 1.5 2005/07/07 03:47:15 mkrufky Exp $
*
* Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM
*
@@ -34,7 +34,6 @@
*
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -208,8 +207,6 @@
struct lgdt3302_state* state =
(struct lgdt3302_state*) fe->demodulator_priv;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10)
-
/* Use 50MHz parameter values from spec sheet since xtal is 50 */
static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 };
static u8 vsb_freq_cfg[] = { VSB_CARRIER_FREQ0, 0x00, 0x87, 0x8e, 0x01 };
@@ -301,9 +298,6 @@
lgdt3302_SwReset(state);
state->current_modulation = param->u.vsb.modulation;
}
-#else
- printk("lgdt3302: %s: you need a newer kernel for this, sorry\n",__FUNCTION__);
-#endif
/* Change only if we are actually changing the channel */
if (state->current_frequency != param->frequency) {
@@ -352,11 +346,28 @@
* This is done in SwReset();
*/
+ /* AGC status register */
+ i2c_selectreadbytes(state, AGC_STATUS, buf, 1);
+ dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
+ if ((buf[0] & 0x0c) == 0x8){
+ /* Test signal does not exist flag */
+ /* as well as the AGC lock flag. */
+ *status |= FE_HAS_SIGNAL;
+ } else {
+ /* Without a signal all other status bits are meaningless */
+ return 0;
+ }
+
/* signal status */
i2c_selectreadbytes(state, TOP_CONTROL, buf, sizeof(buf));
dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]);
+
+#if 0
+ /* Alternative method to check for a signal */
+ /* using the SNR good/bad interrupts. */
if ((buf[2] & 0x30) == 0x10)
*status |= FE_HAS_SIGNAL;
+#endif
/* sync status */
if ((buf[2] & 0x03) == 0x01) {
@@ -369,17 +380,6 @@
*status |= FE_HAS_VITERBI;
}
-#if 0
- /* Alternative method to check for a signal */
- /* AGC status register */
- i2c_selectreadbytes(state, AGC_STATUS, buf, 1);
- dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]);
- if ((buf[0] & 0x0c) == 0x80) /* Test signal does not exist flag */
- /* Test AGC lock flag */
- *status |= FE_HAS_SIGNAL;
- else
- return 0;
-
/* Carrier Recovery Lock Status Register */
i2c_selectreadbytes(state, CARRIER_LOCK, buf, 1);
dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]);
@@ -389,21 +389,14 @@
/* Need to undestand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
- else
- return 0;
break;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10)
case VSB_8:
if ((buf[0] & 0x80) == 0x80)
*status |= FE_HAS_CARRIER;
- else
- return 0;
break;
-#endif
default:
printk("KERN_WARNING lgdt3302: %s: Modulation set to unsupported value\n", __FUNCTION__);
}
-#endif
return 0;
}
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|