> Message du 05/07/05 01:34
> De : "Francois Romieu" <[email protected]>
[...]
> Can you check if there is a regression in sis190-000.patch available at
> http://www.zoreil.com/~romieu/sis190/20050704-2.6.13-rc1/patches ?
>
That one works perfectly; i tried it in the same conditions as
the previous patch, and i don't notice a regression.
[...]
> If it works and you want some entertainment, you can apply sis190-010.patch
> + sis190-020.patch and experience with ethtool/mii-tool.
>
[...]
sis190-010.patch does not compile properly :
# make clean;make;make install
rm -f *.o *.ko .*.cmd .*.flags *.mod.c
make -C /lib/modules/2.6.12.1/build SUBDIRS=/data/src/sis190 modules
make[1]: Entering directory `/usr/src/linux-2.6.12.1-custom'
CC [M] /data/src/sis190/sis190.o
/data/src/sis190/sis190.c: In function `sis190_init_one':
/data/src/sis190/sis190.c:1318: error: structure has no member named `poll_controller'
# diff -puN sis190-20050704-10.c sis190.c
--- sis190-20050704-10.c 2005-07-06 14:49:19.000000000 +0200
+++ sis190.c 2005-07-06 15:41:49.000000000 +0200
@@ -639,8 +640,6 @@ static void sis190_netpoll(struct net_de
sis190_interrupt(pdev->irq, dev, NULL);
enable_irq(pdev->irq);
}
-#else
-#define sis190_netpoll NULL
#endif
static void sis190_free_rx_skb(struct sis190_private *tp,
@@ -1314,7 +1313,9 @@ static int __devinit sis190_init_one(str
dev->tx_timeout = sis190_tx_timeout;
dev->watchdog_timeo = SIS190_TX_TIMEOUT;
dev->hard_start_xmit = sis190_start_xmit;
+#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = sis190_netpoll;
+#endif
dev->set_multicast_list = sis190_set_rx_mode;
SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops);
dev->irq = pdev->irq;
After that, it compiles and works as expected; i can use netconsole
and get local messages on the other box.
There is something wrong whith sis190-020.patch;
it works, i can use the link as usual, i can use
ethtool :
# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Current message level: 0x00000037 (55)
Link detected: yes
But i get those traces in syslog, when the driver is
loaded and every time i use ethtool :
[...]
scheduling while atomic: mii-tool/0x00000001/4699
Call Trace:<ffffffff8030358a>{schedule+122} <ffffffff801ce6de>{avc_has_perm_noaudit+1134}
<ffffffff80191290>{update_atime+64} <ffffffff80139109>{__mod_timer+425}
<ffffffff803047fe>{schedule_timeout+158} <ffffffff80139b70>{process_timeout+0}
<ffffffff80139f68>{msleep+56} <ffffffff880370c8>{:sis190:__mdio_cmd+24}
<ffffffff8803712f>{:sis190:mdio_read+15} <ffffffff88034868>{:mii:generic_mii_ioctl+152}
<ffffffff880387dd>{:sis190:sis190_ioctl+77} <ffffffff802a30db>{dev_ifsioc+971}
<ffffffff802a33e5>{dev_ioctl+741} <ffffffff802e47da>{inet_ioctl+138}
<ffffffff80297fdc>{sock_ioctl+572} <ffffffff8018967a>{do_ioctl+58}
<ffffffff8018998d>{vfs_ioctl+685} <ffffffff80189a2a>{sys_ioctl+106}
<ffffffff8010d866>{system_call+126}
[...]
scheduling while atomic: ethtool/0x00000001/4703
Call Trace:<ffffffff8030358a>{schedule+122} <ffffffff80139109>{__mod_timer+425}
<ffffffff803047fe>{schedule_timeout+158} <ffffffff80139b70>{process_timeout+0}
<ffffffff80139f68>{msleep+56} <ffffffff880370c8>{:sis190:__mdio_cmd+24}
<ffffffff8803712f>{:sis190:mdio_read+15} <ffffffff880340df>{:mii:mii_ethtool_gset+223}
<ffffffff880385de>{:sis190:sis190_get_settings+46} <ffffffff802a43d2>{dev_ethtool+290}
<ffffffff80159862>{buffered_rmqueue+690} <ffffffff80159a32>{__alloc_pages+194}
<ffffffff801ce6de>{avc_has_perm_noaudit+1134} <ffffffff801650f3>{do_no_page+483}
<ffffffff8015be4a>{__do_page_cache_readahead+362} <ffffffff8018f5eb>{__d_lookup+363}
<ffffffff801ce6de>{avc_has_perm_noaudit+1134} <ffffffff801ce6de>{avc_has_perm_noaudit+1134}
<ffffffff80191290>{update_atime+64} <ffffffff801ce76a>{avc_has_perm+90}
<ffffffff80159862>{buffered_rmqueue+690} <ffffffff801cf57a>{inode_has_perm+106}
<ffffffff801561fa>{filemap_nopage+394} <ffffffff802a33b5>{dev_ioctl+693}
<ffffffff802e47da>{inet_ioctl+138} <ffffffff80297fdc>{sock_ioctl+572}
<ffffffff8018967a>{do_ioctl+58} <ffffffff8018998d>{vfs_ioctl+685}
<ffffffff80189a2a>{sys_ioctl+106} <ffffffff8010d866>{system_call+126}
[...]
I also tried to set sis190 mode (eg: 10 full autoneg off), but the driver
froze the box.
As for now mii support seems unstable, i do not play further more with
the media management.
Regards
Pascal
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |