I have determined that if you disable ACPI altogether in the BIOS I can
actually use the on-board hardware. There are still allocation issues,
but I can access the USB controller, Sound and Broadcom ethernet adapter
at this point. I haven't tested any further and would like some other
K8N-DL users to test my findings and make sure that this is the only
setting required to make the board functional at this point.
With BIOS 1003, enter the BIOS and move to POWER. Set ACPI APIC Support
to Disabled and reboot.
There is a small chance that you will also have to set the IRQ's of all
device manually.
Sean
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |