On Wed, Jun 29, 2005 at 08:55:52AM -0700, Greg KH wrote:
> On Wed, Jun 29, 2005 at 03:26:40PM -0500, Abhay Salunke wrote:
> > This patch adds a new function to firmware_calss.c request_firmware_nowait_nohotplug .
> > The dell_rbu driver uses this call to create entries in /sys/class/firmware.
>
> No, this patch is your whole driver and the firmware changes all
> together. Please split this up into at least two different patches so
> we can review them easier.
This mail hs the patch for dell_rbu only , will be sending another patch for firmware_class.c
Signed-off-by: Abhay Salunke <[email protected]>
Thanks
Abhay
diff -uprN linux-2.6.11.11.orig/Documentation/dell_rbu.txt linux-2.6.11.11.new/Documentation/dell_rbu.txt
--- linux-2.6.11.11.orig/Documentation/dell_rbu.txt 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.11.11.new/Documentation/dell_rbu.txt 2005-06-30 15:41:28.000000000 -0500
@@ -0,0 +1,72 @@
+Purpose:
+Demonstrate the usage of the new open sourced rbu (Remote BIOS Update) driver
+for updating BIOS images on Dell servers and desktops.
+
+Scope:
+This document discusses the functionality of the rbu driver only.
+It does not cover the support needed from aplications to enable the BIOS to
+update itself with the image downloaded in to the memory.
+
+Overview:
+This driver enables userspace applications to update the BIOS on Dell servers
+(starting from servers sold since 1999), desktops and notebooks (starting
+from those sold in 2005).
+
+The driver supports BIOS update using the monilothic image and packetized
+image methods. In case of moniolithic the driver allocates a contiguous chunk
+of physical pages having the BIOS image. In case of packetized the app
+using the driver breaks the image in to packets of fixed sizes and the driver
+would place each packet in contiguous physical memory. The driver also
+maintains a link list of packets for reading them back.
+If the dell_rbu driver is unloaded all the allocated memory is freed.
+
+The rbu driver needs to have an application which will inform the BIOS to
+enable the update in the next system reboot.
+
+The user should not unload the rbu driver after downloading the BIOS image
+or updating.
+
+The driver load creates the following directories under the /sys file system.
+/sys/class/firmware/dell_rbu/loading
+/sys/class/firmware/dell_rbu/data
+/sys/devices/platform/dell_rbu/image_type
+/sys/devices/platform/dell_rbu/data
+
+The driver supports two types of update mechanism; monolithic and packetized.
+These update mechanism depends upon the BIOS currently running on the system.
+Most of the Dell systems support a monolithic update where the BIOS image is
+copied to a single contiguous block of physical memory.
+In case of packet mechanism the single memory can be broken in smaller chuks
+of contiguous memory and the BIOS image is scattered in these packets.
+
+By default the driver uses monolithic memory for the update type. This can be
+changed to contiguous during the driver load time by specifying the load
+parameter image_type=packet. This can also be changed later as below
+echo "packet" > /sys/devices/platform/dell_rbu/image_type
+
+Do the steps below to download the BIOS image.
+1) echo 1 > /sys/class/firmware/dell_rbu/loading
+2) cp bios_image.hdr /sys/class/firmware/dell_rbu/data
+3) echo 0 > /sys/class/firmware/dell_rbu/loading
+
+The /sys/class/firmware/dell_rbu/ entries will remain till the following is
+done.
+echo -1 > /sys/class/firmware/dell_rbu/loading
+
+Until this step is completed the drivr cannot be unloaded.
+
+Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
+read back the image downloaded. This is useful in case of packet update
+mechanism where the above steps 1,2,3 will repeated for every packet.
+By reading the /sys/devices/platform/dell_rbu/data file all packet data
+downloaded can be verified in a single file.
+The packets are arranged in this file one after the other in a FIFO order.
+
+NOTE:
+This driver requires a patch for firmware_class.c which has the addition
+of request_firmware_nowait_nohotplug function to wortk
+Also after updating the BIOS image an user mdoe application neeeds to execute
+code which message the BIOS update request to the BIOS. So on the next reboot
+the BIOS knows about the new image downloaded and it updates it self.
+Also don't unload the rbu drive if the image has to be updated.
+
diff -uprN linux-2.6.11.11.orig/drivers/firmware/dell_rbu.c linux-2.6.11.11.new/drivers/firmware/dell_rbu.c
--- linux-2.6.11.11.orig/drivers/firmware/dell_rbu.c 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.11.11.new/drivers/firmware/dell_rbu.c 2005-06-30 15:37:27.000000000 -0500
@@ -0,0 +1,627 @@
+/*
+ * dell_rbu.c
+ * Bios Update driver for Dell systems
+ * Author: Dell Inc
+ * Abhay Salunke <[email protected]>
+ *
+ * Copyright (C) 2005 Dell Inc.
+ *
+ * Remote BIOS Update (rbu) driver is used for updating DELL BIOS by
+ * creating entries in the /sys file systems on Linux 2.6 and higher
+ * kernels. The driver supports two mechanism to update the BIOS namely
+ * contiguous and packetized. Both these methods still require having some
+ * application to set the CMOS bit indicating the BIOS to update itself
+ * after a reboot.
+ *
+ * Contiguous method:
+ * This driver writes the incoming data in a monolithic image by allocating
+ * contiguous physical pages large enough to accommodate the incoming BIOS
+ * image size.
+ *
+ * Packetized method:
+ * The driver writes the incoming packet image by allocating a new packet
+ * on every time the packet data is written. This driver requires an
+ * application to break the BIOS image in to fixed sized packet chunks.
+ *
+ * See Documentation/dell_rbu.txt for more info.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/version.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/dma-mapping.h>
+
+MODULE_AUTHOR("Abhay Salunke <[email protected]>");
+MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
+
+#define BIOS_SCAN_LIMIT 0xffffffff
+#define MAX_IMAGE_LENGTH 16
+static struct _rbu_data {
+ void *image_update_buffer;
+ unsigned long image_update_buffer_size;
+ unsigned long bios_image_size;
+ spinlock_t lock;
+ unsigned long packet_read_count;
+ unsigned long packet_write_count;
+ unsigned long num_packets;
+ unsigned long packetsize;
+} rbu_data;
+
+static char image_type[MAX_IMAGE_LENGTH] = "mono";
+module_param_string(image_type, image_type, sizeof (image_type), 0);
+MODULE_PARM_DESC(image_type, "BIOS image type. choose- mono or packet");
+
+struct packet_data {
+ struct list_head list;
+ size_t length;
+ void *data;
+ int ordernum;
+};
+
+static struct packet_data packet_data_head;
+
+struct platform_device *rbu_device;
+int context;
+static dma_addr_t dell_rbu_dmaaddr;
+
+static void
+init_packet_head(void)
+{
+ INIT_LIST_HEAD(&packet_data_head.list);
+ rbu_data.packet_write_count = 0;
+ rbu_data.packet_read_count = 0;
+ rbu_data.num_packets = 0;
+ rbu_data.packetsize = 0;
+}
+
+static int
+fill_last_packet(void *data, size_t length)
+{
+ struct list_head *ptemp_list;
+ struct packet_data *packet = NULL;
+ int packet_count = 0;
+
+ pr_debug("fill_last_packet: entry \n");
+
+ if (!rbu_data.num_packets) {
+ pr_debug("fill_last_packet: num_packets=0\n");
+ return -ENOMEM;
+ }
+
+ packet_count = rbu_data.num_packets;
+
+ ptemp_list = (&packet_data_head.list)->prev;
+
+ packet = list_entry(ptemp_list, struct packet_data, list);
+
+ if ((rbu_data.packet_write_count + length) > rbu_data.packetsize) {
+ pr_debug("dell_rbu:%s: packet size data "
+ "overrun\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ pr_debug("fill_last_packet : buffer = %p\n", packet->data);
+
+ memcpy((packet->data + rbu_data.packet_write_count), data, length);
+
+ if ((rbu_data.packet_write_count + length) == rbu_data.packetsize) {
+ /*
+ * this was the last data chunk in the packet
+ * so reinitialize the packet data counter to zero
+ */
+ rbu_data.packet_write_count = 0;
+ } else
+ rbu_data.packet_write_count += length;
+
+ pr_debug("fill_last_packet: exit \n");
+ return 0;
+}
+
+static int
+create_packet(size_t length)
+{
+ struct packet_data *newpacket;
+ int ordernum = 0;
+
+ pr_debug("create_packet: entry \n");
+
+ if (!rbu_data.packetsize) {
+ pr_debug("create_packet: packetsize not specified\n");
+ return -EINVAL;
+ }
+
+ newpacket = kmalloc(sizeof (struct packet_data), GFP_KERNEL);
+ if (!newpacket) {
+ printk(KERN_WARNING
+ "dell_rbu:%s: failed to allocate new "
+ "packet\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ ordernum = get_order(length);
+ /*
+ * there is no upper limit on memory
+ * address for packetized mechanism
+ */
+ newpacket->data = (unsigned char *) __get_free_pages(GFP_KERNEL,
+ ordernum);
+
+ pr_debug("create_packet: newpacket %p\n", newpacket->data);
+
+ if (!newpacket->data) {
+ printk(KERN_WARNING
+ "dell_rbu:%s: failed to allocate new "
+ "packet\n", __FUNCTION__);
+ kfree(newpacket);
+ return -ENOMEM;
+ }
+
+ newpacket->ordernum = ordernum;
+ ++rbu_data.num_packets;
+ /*
+ * initialize the newly created packet headers
+ */
+ INIT_LIST_HEAD(&newpacket->list);
+ list_add_tail(&newpacket->list, &packet_data_head.list);
+ /*
+ * packets have fixed size
+ */
+ newpacket->length = rbu_data.packetsize;
+
+ pr_debug("create_packet: exit \n");
+
+ return 0;
+}
+
+static int
+packetize_data(void *data, size_t length)
+{
+ int rc = 0;
+
+ if (!rbu_data.packet_write_count) {
+ if ((rc = create_packet(length)))
+ return rc;
+ }
+ if ((rc = fill_last_packet(data, length)))
+ return rc;
+
+ return rc;
+}
+
+int
+do_packet_read(char *data, struct list_head *ptemp_list,
+ int length, int bytes_read, int *list_read_count)
+{
+ void *ptemp_buf;
+ struct packet_data *newpacket = NULL;
+ int bytes_copied = 0;
+ int j = 0;
+
+ newpacket = list_entry(ptemp_list, struct packet_data, list);
+ *list_read_count += newpacket->length;
+
+ if (*list_read_count > bytes_read) {
+ /* point to the start of unread data */
+ j = newpacket->length - (*list_read_count - bytes_read);
+ /* point to the offset in the packet buffer */
+ ptemp_buf = (u8 *) newpacket->data + j;
+ /*
+ * check if there is enough room in
+ * * the incoming buffer
+ */
+ if (length > (*list_read_count - bytes_read))
+ /*
+ * copy what ever is there in this
+ * * packet and move on
+ */
+ bytes_copied = (*list_read_count - bytes_read);
+ else
+ /* copy the remaining */
+ bytes_copied = length;
+ memcpy(data, ptemp_buf, bytes_copied);
+ }
+ return bytes_copied;
+}
+
+static int
+packet_read_list(char *data, size_t * pread_length)
+{
+ struct list_head *ptemp_list;
+ int temp_count = 0;
+ int bytes_copied = 0;
+ int bytes_read = 0;
+ int remaining_bytes = 0;
+ char *pdest = data;
+
+ /* check if we have any packets */
+ if (0 == rbu_data.num_packets)
+ return -ENOMEM;
+
+ remaining_bytes = *pread_length;
+ bytes_read = rbu_data.packet_read_count;
+
+ ptemp_list = (&packet_data_head.list)->next;
+ while (!list_empty(ptemp_list)) {
+ bytes_copied = do_packet_read(pdest, ptemp_list,
+ remaining_bytes, bytes_read, &temp_count);
+ remaining_bytes -= bytes_copied;
+ bytes_read += bytes_copied;
+ pdest += bytes_copied;
+ /*
+ * check if we reached end of buffer before reaching the
+ * last packet
+ */
+ if (remaining_bytes == 0)
+ break;
+
+ ptemp_list = ptemp_list->next;
+ }
+ /*finally set the bytes read */
+ *pread_length = bytes_read - rbu_data.packet_read_count;
+ rbu_data.packet_read_count = bytes_read;
+ return 0;
+}
+
+static void
+packet_empty_list(void)
+{
+ struct list_head *ptemp_list;
+ struct list_head *pnext_list;
+ struct packet_data *newpacket;
+
+ ptemp_list = (&packet_data_head.list)->next;
+ while (!list_empty(ptemp_list)) {
+ newpacket =
+ list_entry(ptemp_list, struct packet_data, list);
+ pnext_list = ptemp_list->next;
+ list_del(ptemp_list);
+ ptemp_list = pnext_list;
+ /*
+ * zero out the RBU packet memory before freeing
+ * to make sure there are no stale RBU packets left in memory
+ */
+ memset(newpacket->data, 0, rbu_data.packetsize);
+ free_pages((unsigned long) newpacket->data,
+ newpacket->ordernum);
+ kfree(newpacket);
+ }
+ rbu_data.packet_write_count = 0;
+ rbu_data.packet_read_count = 0;
+ rbu_data.num_packets = 0;
+ rbu_data.packetsize = 0;
+}
+
+/*
+ * img_update_free: Frees the buffer allocated for storing BIOS image
+ * Always called with lock held and returned with lock held
+ */
+static void
+img_update_free(void)
+{
+ if (!rbu_data.image_update_buffer)
+ return;
+ /*
+ * zero out this buffer before freeing it to get rid of any stale
+ * BIOS image copied in memory.
+ */
+ memset(rbu_data.image_update_buffer, 0,
+ rbu_data.image_update_buffer_size);
+ dma_free_coherent(NULL, rbu_data.bios_image_size,
+ rbu_data.image_update_buffer, dell_rbu_dmaaddr);
+
+ /*
+ * Re-initialize the rbu_data variables after a free
+ */
+ rbu_data.image_update_buffer = NULL;
+ rbu_data.image_update_buffer_size = 0;
+ rbu_data.bios_image_size = 0;
+}
+
+/*
+ * img_update_realloc: This function allocates the contiguous pages to
+ * accommodate the requested size of data. The memory address and size
+ * values are stored globally and on every call to this function the new
+ * size is checked to see if more data is required than the existing size.
+ * If true the previous memory is freed and new allocation is done to
+ * accommodate the new size. If the incoming size is less then than the
+ * already allocated size, then that memory is reused. This function is
+ * called with lock held and returns with lock held.
+ */
+static int
+img_update_realloc(unsigned long size)
+{
+ unsigned char *image_update_buffer = NULL;
+ unsigned long rc;
+
+ /*
+ * check if the buffer of sufficient size has been
+ * already allocated
+ */
+ if (rbu_data.image_update_buffer_size >= size) {
+ /*
+ * check for corruption
+ */
+ if ((size != 0) && (rbu_data.image_update_buffer == NULL)) {
+ printk(KERN_ERR "dell_rbu:%s: corruption "
+ "check failed\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ /*
+ * we have a valid pre-allocated buffer with
+ * sufficient size
+ */
+ return 0;
+ }
+
+ /*
+ * free any previously allocated buffer
+ */
+ img_update_free();
+
+ spin_unlock(&rbu_data.lock);
+
+ image_update_buffer = dma_alloc_coherent(NULL, size,
+ &dell_rbu_dmaaddr, GFP_KERNEL);
+
+ spin_lock(&rbu_data.lock);
+
+ if (image_update_buffer != NULL) {
+ rbu_data.image_update_buffer = image_update_buffer;
+ rbu_data.image_update_buffer_size = size;
+ rbu_data.bios_image_size =
+ rbu_data.image_update_buffer_size;
+ rc = 0;
+ } else {
+ pr_debug("Not enough memory for image update:"
+ "size = %ld\n", size);
+ rc = -ENOMEM;
+ }
+
+ return rc;
+}
+
+static ssize_t
+read_packet_data(char *buffer, loff_t pos, size_t count)
+{
+ int retval;
+ size_t bytes_left;
+ size_t data_length;
+ char *ptempBuf = buffer;
+ unsigned long imagesize;
+
+ /* check to see if we have something to return */
+ if (rbu_data.num_packets == 0) {
+ pr_debug("read_packet_data: no packets written\n");
+ retval = -ENOMEM;
+ goto read_rbu_data_exit;
+ }
+
+ imagesize = rbu_data.num_packets * rbu_data.packetsize;
+
+ if (pos > imagesize) {
+ retval = 0;
+ printk(KERN_WARNING "dell_rbu:read_packet_data: "
+ "data underrun\n");
+ goto read_rbu_data_exit;
+ }
+
+ bytes_left = imagesize - pos;
+ data_length = min(bytes_left, count);
+
+ if ((retval = packet_read_list(ptempBuf, &data_length)) < 0)
+ goto read_rbu_data_exit;
+
+ if ((pos + count) > imagesize) {
+ rbu_data.packet_read_count = 0;
+ /* this was the last copy */
+ retval = bytes_left;
+ } else
+ retval = count;
+
+ read_rbu_data_exit:
+ return retval;
+}
+
+static ssize_t
+read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
+{
+ unsigned char *ptemp = NULL;
+ size_t bytes_left = 0;
+ size_t data_length = 0;
+ ssize_t ret_count = 0;
+
+ /* check to see if we have something to return */
+ if ((rbu_data.image_update_buffer == NULL) ||
+ (rbu_data.bios_image_size == 0)) {
+ pr_debug("read_rbu_data_mono: image_update_buffer %p ,"
+ "bios_image_size %lu\n",
+ rbu_data.image_update_buffer,
+ rbu_data.bios_image_size);
+ ret_count = -ENOMEM;
+ goto read_rbu_data_exit;
+ }
+
+ if (pos > rbu_data.bios_image_size) {
+ ret_count = 0;
+ goto read_rbu_data_exit;
+ }
+
+ bytes_left = rbu_data.bios_image_size - pos;
+ data_length = min(bytes_left, count);
+
+ ptemp = rbu_data.image_update_buffer;
+ memcpy(buffer, (ptemp + pos), data_length);
+
+ if ((pos + count) > rbu_data.bios_image_size)
+ /* this was the last copy */
+ ret_count = bytes_left;
+ else
+ ret_count = count;
+ read_rbu_data_exit:
+ return ret_count;
+}
+
+static ssize_t
+read_rbu_data(struct kobject *kobj, char *buffer, loff_t pos, size_t count)
+{
+ ssize_t ret_count = 0;
+
+ spin_lock(&rbu_data.lock);
+
+ if (!strcmp(image_type, "mono"))
+ ret_count = read_rbu_mono_data(buffer, pos, count);
+ else if (!strcmp(image_type, "packet"))
+ ret_count = read_packet_data(buffer, pos, count);
+ else
+ pr_debug("read_rbu_data: invalid image type specified\n");
+
+ spin_unlock(&rbu_data.lock);
+ return ret_count;
+}
+
+static ssize_t
+rbu_show_image_type(struct platform_device *rbu_dev, char *buf)
+{
+ unsigned int size = 0;
+ size = sprintf(buf, "%s\n", image_type);
+ return size;
+}
+
+static ssize_t
+rbu_store_image_type(struct platform_device *rbu_dev,
+ const char *buf, size_t count)
+{
+ int rc = count;
+ spin_lock(&rbu_data.lock);
+
+ if (strlen(buf) < MAX_IMAGE_LENGTH)
+ sscanf(buf, "%s", image_type);
+ else
+ printk(KERN_WARNING "dell_rbu: image_type is invalid"
+ "max chars = %d\n", MAX_IMAGE_LENGTH);
+
+ /* we must free all previous allocations */
+ packet_empty_list();
+ img_update_free();
+
+ spin_unlock(&rbu_data.lock);
+ return rc;
+}
+
+struct rbu_attribute {
+ struct attribute attr;
+ ssize_t(*show) (struct platform_device * rbu_dev, char *buf);
+ ssize_t(*store) (struct platform_device * rbu_dev,
+ const char *buf, size_t count);
+};
+
+#define RBU_DEVICE_ATTR(_name,_mode,_show,_store ) \
+struct rbu_attribute rbu_attr_##_name = { \
+ .attr ={.name= __stringify(_name), .mode= _mode, .owner= THIS_MODULE},\
+ .show = _show, \
+ .store = _store, \
+};
+
+static RBU_DEVICE_ATTR(image_type, 0644, rbu_show_image_type,
+ rbu_store_image_type);
+
+static struct bin_attribute rbu_data_attr = {
+ .attr = {.name = "data",.owner = THIS_MODULE,.mode = 0444},
+ .read = read_rbu_data,
+};
+
+void
+callbackfn_rbu(const struct firmware *fw, void *context)
+{
+ int rc = 0;
+
+ if (!fw || !fw->size)
+ return;
+
+ spin_lock(&rbu_data.lock);
+ if (!strcmp(image_type, "mono")) {
+ if (!img_update_realloc(fw->size))
+ memcpy(rbu_data.image_update_buffer,
+ fw->data, fw->size);
+ } else if (!strcmp(image_type, "packet")) {
+ if (!rbu_data.packetsize)
+ rbu_data.packetsize = fw->size;
+ else if (rbu_data.packetsize != fw->size) {
+ packet_empty_list();
+ rbu_data.packetsize = fw->size;
+ }
+ packetize_data(fw->data, fw->size);
+ } else
+ pr_debug("invalid image type specified.\n");
+ spin_unlock(&rbu_data.lock);
+
+ rc = request_firmware_nowait_nohotplug(THIS_MODULE,
+ "dell_rbu", &rbu_device->dev, &context, callbackfn_rbu);
+ if (rc)
+ printk(KERN_ERR
+ "dell_rbu:%s request_firmware_nowait failed"
+ " %d\n", __FUNCTION__, rc);
+}
+
+static int __init
+dcdrbu_init(void)
+{
+ int rc = 0;
+ spin_lock_init(&rbu_data.lock);
+
+ init_packet_head();
+
+ rbu_device =
+ platform_device_register_simple("dell_rbu", -1, NULL, 0);
+ if (!rbu_device) {
+ printk(KERN_ERR
+ "dell_rbu:%s:platform_device_register_simple "
+ "failed\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ sysfs_create_file(&rbu_device->dev.kobj,
+ &rbu_attr_image_type.attr);
+
+ sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
+
+ rc = request_firmware_nowait_nohotplug(THIS_MODULE,
+ "dell_rbu", &rbu_device->dev, &context, callbackfn_rbu);
+ if (rc)
+ printk(KERN_ERR "dell_rbu:%s:request_firmware_nowait"
+ " failed %d\n", __FUNCTION__, rc);
+
+ return rc;
+
+}
+
+static __exit void
+dcdrbu_exit(void)
+{
+ spin_lock(&rbu_data.lock);
+ packet_empty_list();
+ img_update_free();
+ spin_unlock(&rbu_data.lock);
+ platform_device_unregister(rbu_device);
+}
+
+module_exit(dcdrbu_exit);
+module_init(dcdrbu_init);
diff -uprN linux-2.6.11.11.orig/drivers/firmware/Kconfig linux-2.6.11.11.new/drivers/firmware/Kconfig
--- linux-2.6.11.11.orig/drivers/firmware/Kconfig 2005-06-14 21:00:10.000000000 -0500
+++ linux-2.6.11.11.new/drivers/firmware/Kconfig 2005-06-30 15:37:43.000000000 -0500
@@ -58,4 +58,15 @@ config EFI_PCDP
See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
+config DELL_RBU
+ tristate "BIOS update support for DELL systems via sysfs"
+ default y
+ select FW_LOADER
+ help
+ Say Y if you want to have the option of updating the BIOS for your
+ DELL system. Note you need a supporting application to comunicate
+ with the BIOS regardin the new image for the image update to
+ take effect.
+ See <file:Documentation/dell_rbu.txt> for more details on the driver.
+
endmenu
diff -uprN linux-2.6.11.11.orig/drivers/firmware/Makefile linux-2.6.11.11.new/drivers/firmware/Makefile
--- linux-2.6.11.11.orig/drivers/firmware/Makefile 2005-06-14 21:01:11.000000000 -0500
+++ linux-2.6.11.11.new/drivers/firmware/Makefile 2005-06-30 15:37:35.000000000 -0500
@@ -4,3 +4,4 @@
obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_EFI_VARS) += efivars.o
obj-$(CONFIG_EFI_PCDP) += pcdp.o
+obj-$(CONFIG_DELL_RBU) += dell_rbu.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
