diff --git a/Makefile b/Makefile
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 12
-EXTRAVERSION = .1
+EXTRAVERSION = .2
NAME=Woozy Numbat
# *DOCUMENTATION*
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -435,6 +435,7 @@ acpi_pci_irq_enable (
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq >= 0 && (dev->irq <= 0xF)) {
printk(" - using IRQ %d\n", dev->irq);
+ acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
return_VALUE(0);
}
else {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2307,6 +2307,7 @@ e1000_xmit_frame(struct sk_buff *skb, st
tso = e1000_tso(adapter, skb);
if (tso < 0) {
dev_kfree_skb_any(skb);
+ spin_unlock_irqrestore(&adapter->tx_lock, flags);
return NETDEV_TX_OK;
}
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -396,7 +396,7 @@ int pci_register_driver(struct pci_drive
/* FIXME, once all of the existing PCI drivers have been fixed to set
* the pci shutdown function, this test can go away. */
if (!drv->driver.shutdown)
- drv->driver.shutdown = pci_device_shutdown,
+ drv->driver.shutdown = pci_device_shutdown;
drv->driver.owner = drv->owner;
drv->driver.kobj.ktype = &pci_driver_kobj_type;
pci_init_dynids(&drv->dynids);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1150,7 +1150,7 @@ iospace_error_exit:
*/
int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
{
- int ret;
+ int ret = -ENODEV;
device_reg_t __iomem *reg;
struct Scsi_Host *host;
scsi_qla_host_t *ha;
@@ -1161,7 +1161,7 @@ int qla2x00_probe_one(struct pci_dev *pd
fc_port_t *fcport;
if (pci_enable_device(pdev))
- return -1;
+ goto probe_out;
host = scsi_host_alloc(&qla2x00_driver_template,
sizeof(scsi_qla_host_t));
@@ -1183,9 +1183,8 @@ int qla2x00_probe_one(struct pci_dev *pd
/* Configure PCI I/O space */
ret = qla2x00_iospace_config(ha);
- if (ret != 0) {
- goto probe_alloc_failed;
- }
+ if (ret)
+ goto probe_failed;
/* Sanitize the information from PCI BIOS. */
host->irq = pdev->irq;
@@ -1258,23 +1257,10 @@ int qla2x00_probe_one(struct pci_dev *pd
qla_printk(KERN_WARNING, ha,
"[ERROR] Failed to allocate memory for adapter\n");
- goto probe_alloc_failed;
+ ret = -ENOMEM;
+ goto probe_failed;
}
- pci_set_drvdata(pdev, ha);
- host->this_id = 255;
- host->cmd_per_lun = 3;
- host->unique_id = ha->instance;
- host->max_cmd_len = MAX_CMDSZ;
- host->max_channel = ha->ports - 1;
- host->max_id = ha->max_targets;
- host->max_lun = ha->max_luns;
- host->transportt = qla2xxx_transport_template;
- if (scsi_add_host(host, &pdev->dev))
- goto probe_alloc_failed;
-
- qla2x00_alloc_sysfs_attr(ha);
-
if (qla2x00_initialize_adapter(ha) &&
!(ha->device_flags & DFLG_NO_CABLE)) {
@@ -1285,11 +1271,10 @@ int qla2x00_probe_one(struct pci_dev *pd
"Adapter flags %x.\n",
ha->host_no, ha->device_flags));
+ ret = -ENODEV;
goto probe_failed;
}
- qla2x00_init_host_attr(ha);
-
/*
* Startup the kernel thread for this host adapter
*/
@@ -1299,17 +1284,26 @@ int qla2x00_probe_one(struct pci_dev *pd
qla_printk(KERN_WARNING, ha,
"Unable to start DPC thread!\n");
+ ret = -ENODEV;
goto probe_failed;
}
wait_for_completion(&ha->dpc_inited);
+ host->this_id = 255;
+ host->cmd_per_lun = 3;
+ host->unique_id = ha->instance;
+ host->max_cmd_len = MAX_CMDSZ;
+ host->max_channel = ha->ports - 1;
+ host->max_lun = MAX_LUNS;
+ host->transportt = qla2xxx_transport_template;
+
if (IS_QLA2100(ha) || IS_QLA2200(ha))
ret = request_irq(host->irq, qla2100_intr_handler,
SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
else
ret = request_irq(host->irq, qla2300_intr_handler,
SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
- if (ret != 0) {
+ if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
host->irq);
@@ -1363,9 +1357,18 @@ int qla2x00_probe_one(struct pci_dev *pd
msleep(10);
}
+ pci_set_drvdata(pdev, ha);
ha->flags.init_done = 1;
num_hosts++;
+ ret = scsi_add_host(host, &pdev->dev);
+ if (ret)
+ goto probe_failed;
+
+ qla2x00_alloc_sysfs_attr(ha);
+
+ qla2x00_init_host_attr(ha);
+
qla_printk(KERN_INFO, ha, "\n"
" QLogic Fibre Channel HBA Driver: %s\n"
" QLogic %s - %s\n"
@@ -1384,9 +1387,6 @@ int qla2x00_probe_one(struct pci_dev *pd
probe_failed:
fc_remove_host(ha->host);
- scsi_remove_host(host);
-
-probe_alloc_failed:
qla2x00_free_device(ha);
scsi_host_put(host);
@@ -1394,7 +1394,8 @@ probe_alloc_failed:
probe_disable_device:
pci_disable_device(pdev);
- return -1;
+probe_out:
+ return ret;
}
EXPORT_SYMBOL_GPL(qla2x00_probe_one);
diff --git a/include/asm-i386/string.h b/include/asm-i386/string.h
--- a/include/asm-i386/string.h
+++ b/include/asm-i386/string.h
@@ -116,7 +116,8 @@ __asm__ __volatile__(
"orb $1,%%al\n"
"3:"
:"=a" (__res), "=&S" (d0), "=&D" (d1)
- :"1" (cs),"2" (ct));
+ :"1" (cs),"2" (ct)
+ :"memory");
return __res;
}
@@ -138,8 +139,9 @@ __asm__ __volatile__(
"3:\tsbbl %%eax,%%eax\n\t"
"orb $1,%%al\n"
"4:"
- :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
- :"1" (cs),"2" (ct),"3" (count));
+ :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
+ :"1" (cs),"2" (ct),"3" (count)
+ :"memory");
return __res;
}
@@ -158,7 +160,9 @@ __asm__ __volatile__(
"movl $1,%1\n"
"2:\tmovl %1,%0\n\t"
"decl %0"
- :"=a" (__res), "=&S" (d0) : "1" (s),"0" (c));
+ :"=a" (__res), "=&S" (d0)
+ :"1" (s),"0" (c)
+ :"memory");
return __res;
}
@@ -175,7 +179,9 @@ __asm__ __volatile__(
"leal -1(%%esi),%0\n"
"2:\ttestb %%al,%%al\n\t"
"jne 1b"
- :"=g" (__res), "=&S" (d0), "=&a" (d1) :"0" (0),"1" (s),"2" (c));
+ :"=g" (__res), "=&S" (d0), "=&a" (d1)
+ :"0" (0),"1" (s),"2" (c)
+ :"memory");
return __res;
}
@@ -189,7 +195,9 @@ __asm__ __volatile__(
"scasb\n\t"
"notl %0\n\t"
"decl %0"
- :"=c" (__res), "=&D" (d0) :"1" (s),"a" (0), "0" (0xffffffffu));
+ :"=c" (__res), "=&D" (d0)
+ :"1" (s),"a" (0), "0" (0xffffffffu)
+ :"memory");
return __res;
}
@@ -333,7 +341,9 @@ __asm__ __volatile__(
"je 1f\n\t"
"movl $1,%0\n"
"1:\tdecl %0"
- :"=D" (__res), "=&c" (d0) : "a" (c),"0" (cs),"1" (count));
+ :"=D" (__res), "=&c" (d0)
+ :"a" (c),"0" (cs),"1" (count)
+ :"memory");
return __res;
}
@@ -369,7 +379,7 @@ __asm__ __volatile__(
"je 2f\n\t"
"stosb\n"
"2:"
- : "=&c" (d0), "=&D" (d1)
+ :"=&c" (d0), "=&D" (d1)
:"a" (c), "q" (count), "0" (count/4), "1" ((long) s)
:"memory");
return (s);
@@ -392,7 +402,8 @@ __asm__ __volatile__(
"jne 1b\n"
"3:\tsubl %2,%0"
:"=a" (__res), "=&d" (d0)
- :"c" (s),"1" (count));
+ :"c" (s),"1" (count)
+ :"memory");
return __res;
}
/* end of additional stuff */
@@ -473,7 +484,8 @@ static inline void * memscan(void * addr
"dec %%edi\n"
"1:"
: "=D" (addr), "=c" (size)
- : "0" (addr), "1" (size), "a" (c));
+ : "0" (addr), "1" (size), "a" (c)
+ : "memory");
return addr;
}
diff --git a/mm/memory.c b/mm/memory.c
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1164,7 +1164,7 @@ int remap_pfn_range(struct vm_area_struc
{
pgd_t *pgd;
unsigned long next;
- unsigned long end = addr + size;
+ unsigned long end = addr + PAGE_ALIGN(size);
struct mm_struct *mm = vma->vm_mm;
int err;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -315,8 +315,8 @@ err:
static void netlink_remove(struct sock *sk)
{
netlink_table_grab();
- nl_table[sk->sk_protocol].hash.entries--;
- sk_del_node_init(sk);
+ if (sk_del_node_init(sk))
+ nl_table[sk->sk_protocol].hash.entries--;
if (nlk_sk(sk)->groups)
__sk_del_bind_node(sk);
netlink_table_ungrab();
@@ -429,7 +429,12 @@ retry:
err = netlink_insert(sk, pid);
if (err == -EADDRINUSE)
goto retry;
- return 0;
+
+ /* If 2 threads race to autobind, that is fine. */
+ if (err == -EBUSY)
+ err = 0;
+
+ return err;
}
static inline int netlink_capable(struct socket *sock, unsigned int flag)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]