this is in the changefile to 2.6.11. This seems to be the real
culprit. I guarantee you if this patch is reverted, there will be no
problems.
<[email protected]>
[PATCH] r8169: hint for Tx flow control
return 1 in start_xmit() when the required descriptors are not available
and wait for more room.
Signed-off-by: Francois Romieu <[email protected]>
Ed Sweetman wrote:
Pierre Ossman wrote:
Bjorn Helgaas wrote:
Your 2.6.11 dmesg mentions the VIA IRQ fixup, but the 2.6.12 one
doesn't. I bet something's broken there.
Can you try the attached debugging patch? And please collect the
output of lspci, too.
I tried the attached patch and it had no effect. I also tried porting
the 2.6.11 way of handling the VIA quirk but it didn't have any effect.
I'll try a more complete port tomorrow (it was a bit of a hack this
time).
2.6.11-mm4 doesn't work. So i'm guessing 2.6.11 wont work either which
may be why backporting it's via fixes didn't do anything. I'm gonna
try vanilla and if that by some crazy chance works, then it'll be
fairly easy to see what change did it since mm has a nice Changelog.
-
To unsubscribe from this list: send the line "unsubscribe
linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]