Promise ATA/133 Errors With 2.6.10+

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have two different machines with the 7200.8 Seagate 8MB 400GB drives.

Both have ATA/133 controllers, the error is the same on both:

Jun 24 15:24:18 localhost kernel: hde: no DRQ after issuing MULTWRITE_EXT

I put the drive on an (older) Promise ATA/100 controller = works great!
I put the drive on the second box on the motherboard IDE interface = works great!

What happened > 2.6.10 to the promise driver?

??

Jun 24 15:24:18 localhost kernel: PDC202XX: Primary channel reset.
Jun 24 15:24:18 localhost kernel: hde: timeout waiting for DMA
Jun 24 15:24:18 localhost kernel: hde: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Jun 24 15:24:18 localhost kernel:
Jun 24 15:24:18 localhost kernel: ide: failed opcode was: unknown
Jun 24 15:24:18 localhost kernel: hde: drive not ready for command
Jun 24 15:24:18 localhost kernel: hde: status timeout: status=0xd0 { Busy }
Jun 24 15:24:18 localhost kernel:
Jun 24 15:24:18 localhost kernel: ide: failed opcode was: unknown
Jun 24 15:24:18 localhost kernel: PDC202XX: Primary channel reset.
Jun 24 15:24:18 localhost kernel: hde: no DRQ after issuing MULTWRITE_EXT
Jun 24 15:24:18 localhost kernel: ide2: reset: success

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux