Re: Linux v2.6.12-rc6

[Bill Davidsen <davidsen@tmr.com>]

Johannes Stezenbach wrote:
> Brice Goglin wrote:
>
> > Johannes Stezenbach a écrit :
> >
> > > Johannes Stezenbach wrote:
> > >
> > >
> > > > Hype-threading stopped working for me (probably due to
> > > > me not enabling ACPI). dmesg output and .config attached.
> > > > -rc5 worked fine. The board is an Asus P4P800-Deluxe.
> > > >
> > > > dmesg: WARNING: 1 siblings found for CPU0, should be 2
> > >
> > >
> > > Indeed SMT works fine if I enable ACPI.
> > > Is SMT without ACPI not supported?
> >
> > You can pass acpi=ht into the kernel command line to disable
> > ACPI except the minimum required to get HT support.
>
>
> That's nice, but I was thinking along the lines of:
>
> diff -ur linux-2.6.12-rc6.orig/arch/i386/Kconfig linux-2.6.12-rc6/arch/i386/Kconfig
> --- linux-2.6.12-rc6.orig/arch/i386/Kconfig	2005-06-06 23:16:27.000000000 +0200
> +++ linux-2.6.12-rc6/arch/i386/Kconfig	2005-06-08 13:35:08.000000000 +0200
> @@ -503,7 +503,7 @@
>  
>  config SCHED_SMT
>  	bool "SMT (Hyperthreading) scheduler support"
> -	depends on SMP
> +	depends on SMP && ACPI
>  	default off
>  	help
>  	  SMT scheduler support improves the CPU scheduler's decision making
>
> Comments? Is this intended?

I would think that you can't do HT without ACPI, so there's no point in 
building in HT scheduling unless you can have HT.

Is that what you were asking? I was hoping someone else would comment.

Scheduling is getting harder and harder to get right... I have this 
thought of a Beowolf cluster of NUMA machines, with each node being HT 
multicore SMP. By "right" I meant "optimal," I'm sure that setup would 
do something reasonable with current scheduling.

--
   -bill davidsen (davidsen@tmr.com)
"The secret to procrastination is to put things off until the
 last possible moment - but no longer"  -me
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/