RE: x86_64 Opteron dual core panics on boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Try 2.6.12 - this issue is fixed by recent patches.

Andy 

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Andreas Junge
> Sent: Monday, June 13, 2005 10:48
> To: [email protected]
> Subject: RE:x86_64 Opteron dual core panics on boot
> 
> FYI, we have the same kernel panic as described in Tom Duffy's message
> when booting our dual (not dual core) Opteron 248's. About one in ten
> boots ends up in a kernel panic.
> 
> Andreas Junge
> 
> -------------------------
> 
> Bootdata ok (command line is ro root=LABEL=/ rhgb 
> console=ttyS0,38400n8
> console=tty0 debug)
> Linux version 2.6.11-1.27_FC3smp 
> ([email protected]) (gcc
> version 3.4.3 20050227 (Red Hat 3.4.3-22)) #1 SMP Tue May 17 20:38:05
> EDT 2005
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
>  BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (ACPI data)
>  BIOS-e820: 00000000bfffe000 - 00000000c0000000 (ACPI NVS)
>  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
> ACPI: RSDP (v000 ACPIAM                                ) @
> 0x00000000000f7f00
> ACPI: RSDT (v001 A M I  OEMRSDT  0x04000520 MSFT 0x00000097) @
> 0x00000000bfff0000
> ACPI: FADT (v002 A M I  OEMFACP  0x04000520 MSFT 0x00000097) @
> 0x00000000bfff0200
> ACPI: MADT (v001 A M I  OEMAPIC  0x04000520 MSFT 0x00000097) @
> 0x00000000bfff0390
> ACPI: OEMB (v001 A M I  AMI_OEM  0x04000520 MSFT 0x00000097) @
> 0x00000000bfffe040
> ACPI: SRAT (v001 A M I  OEMSRAT  0x04000520 MSFT 0x00000097) @
> 0x00000000bfff4520
> ACPI: DSDT (v001  TUNA_ TUNA_110 0x00000110 INTL 0x02002026) @
> 0x0000000000000000
> SRAT: PXM 0 -> APIC 0 -> Node 0
> SRAT: PXM 1 -> APIC 1 -> Node 1
> SRAT: Node 0 PXM 0 100000-7fffffff
> SRAT: Node 1 PXM 1 80000000-bfffffff
> SRAT: Node 0 PXM 0 0-7fffffff
> Bootmem setup node 0 0000000000000000-000000007fffffff
> Bootmem setup node 1 0000000080000000-00000000bfffffff
> On node 0 totalpages: 524287
>   DMA zone: 4096 pages, LIFO batch:1
>   Normal zone: 520191 pages, LIFO batch:16
>   HighMem zone: 0 pages, LIFO batch:1
> On node 1 totalpages: 262143
>   DMA zone: 0 pages, LIFO batch:1
>   Normal zone: 262143 pages, LIFO batch:16
>   HighMem zone: 0 pages, LIFO batch:1
> Nvidia board detected. Ignoring ACPI timer override.
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:5 APIC version 16
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1 15:5 APIC version 16
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24])
> IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27
> ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28])
> IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: BIOS IRQ0 pin2 override ignored.
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Checking aperture...
> CPU 0: aperture @ 4000000 size 32 MB
> Aperture from northbridge cpu 0 too small (32 MB)
> No AGP bridge found
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Mapping aperture over 65536 KB of RAM @ 4000000
> Built 2 zonelists
> Kernel command line: ro root=LABEL=/ rhgb console=ttyS0,38400n8
> console=tty0 debug
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 131072 bytes)
> time.c: Using 1.193182 MHz PIT timer.
> time.c: Detected 2211.365 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Memory: 3024176k/5242880k available (2317k kernel code, 0k reserved,
> 1224k data, 220k init)
> Calibrating delay loop... 4308.99 BogoMIPS (lpj=2154496)
> Security Framework v1.0.0 initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
> selinux_register_security:  Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 0(1) -> Node 0
> Using local APIC NMI watchdog using perfctr0
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 0(1) -> Node 0
> CPU0: AMD Opteron(tm) Processor 248 stepping 0a
> per-CPU timeslice cutoff: 1023.91 usecs.
> task migration cache decay timeout: 2 msecs.
> Booting processor 1/1 rip 6000 rsp ffff810081447f58
> Initializing CPU#1
> Calibrating delay loop... <7>spurious 8259A interrupt: IRQ7.
> ----------- [cut here ] --------- [please bite here ] ---------
> Kernel BUG at timer:418
> invalid operand: 0000 [1] SMP 
> CPU 1 
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.11-1.27_FC3smp
> RIP: 0010:[<ffffffff80141c3e>] <ffffffff80141c3e>{cascade+46}
> RSP: 0018:ffff810002c17ed0  EFLAGS: 00010087
> 
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux