Jeff Garzik wrote:
> Can anyone with aic79xx hardware give me a simple "it works"
> or "this breaks things" answer, for the patch below?
>
> This changes the aic79xx driver to use the standard Linux SCSI queueing
> code, rather than its own. After applying this patch, NO behavior
> changes should be seen.
>
> The patch is against 2.6.12-rc5, but probably applies OK to recent 2.6.x
> kernels.
>
Hmm. Does not quite work here:
scsi0: Starting DV
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec 29320 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs
In DV Thread
scsi0: Beginning Domain Validation
scsi0:A:0:0: Performing DV
scsi0:2223: Going from state 0 to state 1
scsi0:A:0:0: Sending INQ
scsi0: Timeout while doing DV command 12.
And from there all hell breaks loose.
It looks as if it simply refuses to send any commands ...
Investigating.
Cheers,
Hannes
--
Dr. Hannes Reinecke [email protected]
SuSE Linux AG S390 & zSeries
Maxfeldstraße 5 +49 911 74053 688
90409 Nürnberg http://www.suse.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]