I forgot attach... send it again:
Mauro Carvalho Chehab wrote:
>This patch adds support for various SAA7134 cards and brings some fixes.
>
>Signed-off-by: Mauro Carvalho Chehab <[email protected]>
>Signed-off-by: Fabrice Aeschbacher <[email protected]>
>Signed-off-by: Hermann Pitton <[email protected]>.
>Signed-off-by: Nickolay V Shmyrev <[email protected]>
>
>
>
>
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134.h linux/drivers/media/video/saa7134/saa7134.h
--- linux-2.6.12/drivers/media/video/saa7134/saa7134.h 2005-06-07 15:39:55.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134.h 2005-06-12 01:22:33.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134.h,v 1.38 2005/03/07 12:01:51 kraxel Exp $
+ * $Id: saa7134.h,v 1.41 2005/06/07 18:02:26 nsh Exp $
*
* v4l2 device driver for philips saa7134 based TV cards
*
@@ -168,7 +168,7 @@
#define SAA7134_BOARD_SABRENT_SBTTVFM 42
#define SAA7134_BOARD_ZOLID_XPERT_TV7134 43
#define SAA7134_BOARD_EMPIRE_PCI_TV_RADIO_LE 44
-#define SAA7134_BOARD_AVERMEDIA_307 45
+#define SAA7134_BOARD_AVERMEDIA_STUDIO_307 45
#define SAA7134_BOARD_AVERMEDIA_CARDBUS 46
#define SAA7134_BOARD_CINERGY400_CARDBUS 47
#define SAA7134_BOARD_CINERGY600_MK3 48
@@ -179,6 +179,10 @@
#define SAA7135_BOARD_ASUSTeK_TVFM7135 53
#define SAA7134_BOARD_FLYTVPLATINUM_FM 54
#define SAA7134_BOARD_FLYDVBTDUO 55
+#define SAA7134_BOARD_AVERMEDIA_307 56
+#define SAA7134_BOARD_AVERMEDIA_GO_007_FM 57
+#define SAA7134_BOARD_ADS_INSTANT_TV 58
+#define SAA7134_BOARD_KWORLD_VSTREAM_XPERT 59
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-core.c linux/drivers/media/video/saa7134/saa7134-core.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-core.c 2005-06-07 15:39:55.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-core.c 2005-06-12 01:22:33.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-core.c,v 1.28 2005/02/22 09:56:29 kraxel Exp $
+ * $Id: saa7134-core.c,v 1.30 2005/05/22 19:23:39 nsh Exp $
*
* device driver for philips saa7134 based TV cards
* driver core
@@ -1212,10 +1212,8 @@
static void saa7134_fini(void)
{
-#ifdef CONFIG_MODULES
if (pending_registered)
unregister_module_notifier(&pending_notifier);
-#endif
pci_unregister_driver(&saa7134_pci_driver);
}
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-cards.c linux/drivers/media/video/saa7134/saa7134-cards.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-cards.c 2005-06-07 15:38:10.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-cards.c 2005-06-12 01:22:33.000000000 -0300
@@ -1,6 +1,6 @@
/*
- * $Id: saa7134-cards.c,v 1.54 2005/03/07 12:01:51 kraxel Exp $
+ * $Id: saa7134-cards.c,v 1.58 2005/06/07 18:05:00 nsh Exp $
*
* device driver for philips saa7134 based TV cards
* card-specific stuff.
@@ -165,7 +165,7 @@
.inputs = {{
.name = name_tv,
.vmux = 1,
- .amux = LINE2,
+ .amux = TV,
.tv = 1,
},{
.name = name_comp1,
@@ -878,7 +878,7 @@
},
[SAA7134_BOARD_MANLI_MTV002] = {
/* Ognjen Nastic <[email protected]> */
- .name = "Manli MuchTV M-TV002",
+ .name = "Manli MuchTV M-TV002/Behold TV 403 FM",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_PAL,
.inputs = {{
@@ -899,14 +899,10 @@
.name = name_radio,
.amux = LINE2,
},
- .mute = {
- .name = name_mute,
- .amux = LINE1,
- },
},
[SAA7134_BOARD_MANLI_MTV001] = {
/* Ognjen Nastic <[email protected]> UNTESTED */
- .name = "Manli MuchTV M-TV001",
+ .name = "Manli MuchTV M-TV001/Behold TV 401",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_PAL,
.inputs = {{
@@ -923,6 +919,10 @@
.amux = LINE2,
.tv = 1,
}},
+ .mute = {
+ .name = name_mute,
+ .amux = LINE1,
+ },
},
[SAA7134_BOARD_TG3000TV] = {
/* TransGear 3000TV */
@@ -1078,7 +1078,6 @@
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_FM1256_IH3,
.tda9887_conf = TDA9887_PRESENT,
- .gpiomask = 0x3,
.inputs = {{
.name = name_tv,
.vmux = 1,
@@ -1285,7 +1284,7 @@
.gpio =0x8000,
}
},
- [SAA7134_BOARD_AVERMEDIA_307] = {
+ [SAA7134_BOARD_AVERMEDIA_STUDIO_307] = {
/*
Nickolay V. Shmyrev <[email protected]>
Lots of thanks to Andrey Zolotarev <[email protected]>
@@ -1323,6 +1322,35 @@
.gpio = 0x01,
},
},
+ [SAA7134_BOARD_AVERMEDIA_GO_007_FM] = {
+ .name = "Avermedia AVerTV GO 007 FM",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .gpiomask = 0x00300003,
+// .gpiomask = 0x8c240003,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x01,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE2,
+ .gpio = 0x02,
+ },{
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE2,
+ .gpio = 0x02,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE1,
+ .gpio = 0x00300001,
+ },
+ },
[SAA7134_BOARD_AVERMEDIA_CARDBUS] = {
/* Jon Westgate <[email protected]> */
.name = "AVerMedia Cardbus TV/Radio",
@@ -1492,7 +1520,6 @@
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_FQ1216ME,
.tda9887_conf = TDA9887_PRESENT,
- .gpiomask = 0x3,
.inputs = {{
.name = name_tv,
.vmux = 1,
@@ -1546,7 +1573,82 @@
// .gpio = 0x4000,
}},
},
-};
+ [SAA7134_BOARD_AVERMEDIA_307] = {
+ /*
+ Davydov Vladimir <[email protected]>
+ */
+ .name = "Avermedia AVerTV 307",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_FQ1216ME,
+ .tda9887_conf = TDA9887_PRESENT,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ },{
+ .name = name_comp2,
+ .vmux = 3,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ },
+ [SAA7134_BOARD_ADS_INSTANT_TV] = {
+ .name = "ADS Tech Instant TV (saa7135)",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ }},
+ },
+ [SAA7134_BOARD_KWORLD_VSTREAM_XPERT] = {
+ .name = "Kworld/Tevion V-Stream Xpert TV PVR7134",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .gpiomask = 0x0700,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x000,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ .gpio = 0x200, //gpio by DScaler
+ },{
+ .name = name_svideo,
+ .vmux = 0,
+ .amux = LINE1,
+ .gpio = 0x200,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE1,
+ .gpio = 0x100,
+ },
+ },
+ };
+
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
/* ------------------------------------------------------------------ */
@@ -1663,7 +1765,7 @@
.driver_data = SAA7134_BOARD_ASUSTeK_TVFM7134,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
- .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7135,
.subvendor = PCI_VENDOR_ID_ASUSTEK,
.subdevice = 0x4845,
.driver_data = SAA7135_BOARD_ASUSTeK_TVFM7135,
@@ -1824,6 +1926,12 @@
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0x9715,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_307,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xa70a,
.driver_data = SAA7134_BOARD_AVERMEDIA_307,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
@@ -1844,6 +1952,26 @@
.subvendor = 0x5168,
.subdevice = 0x0306,
.driver_data = SAA7134_BOARD_FLYDVBTDUO,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xf31f,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_GO_007_FM,
+
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7135,
+ .subvendor = 0x1421,
+ .subdevice = 0x0350, /* PCI version */
+ .driver_data = SAA7134_BOARD_ADS_INSTANT_TV,
+
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7135,
+ .subvendor = 0x1421,
+ .subdevice = 0x0370, /* cardbus version */
+ .driver_data = SAA7134_BOARD_ADS_INSTANT_TV,
},{
/* --- boards without eeprom + subsystem ID --- */
@@ -1954,20 +2082,23 @@
dev->has_remote = 1;
board_flyvideo(dev);
break;
- case SAA7134_BOARD_FLYTVPLATINUM_FM:
+ case SAA7134_BOARD_FLYTVPLATINUM_FM:
case SAA7134_BOARD_CINERGY400:
case SAA7134_BOARD_CINERGY600:
case SAA7134_BOARD_CINERGY600_MK3:
case SAA7134_BOARD_ECS_TVP3XP:
case SAA7134_BOARD_ECS_TVP3XP_4CB5:
case SAA7134_BOARD_MD2819:
+ case SAA7134_BOARD_KWORLD_VSTREAM_XPERT:
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_305:
+ case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_307:
+ case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
// case SAA7134_BOARD_SABRENT_SBTTVFM: /* not finished yet */
case SAA7134_BOARD_VIDEOMATE_TV_PVR:
- dev->has_remote = 1;
- break;
+ case SAA7134_BOARD_MANLI_MTV001:
+ case SAA7134_BOARD_MANLI_MTV002:
case SAA7134_BOARD_AVACSSMARTTV:
dev->has_remote = 1;
break;
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-i2c.c linux/drivers/media/video/saa7134/saa7134-i2c.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-i2c.c 2005-06-07 15:38:10.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-i2c.c 2005-06-12 01:22:33.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-i2c.c,v 1.10 2005/01/24 17:37:23 kraxel Exp $
+ * $Id: saa7134-i2c.c,v 1.11 2005/06/12 01:36:14 mchehab Exp $
*
* device driver for philips saa7134 based TV cards
* i2c interface support
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-tvaudio.c linux/drivers/media/video/saa7134/saa7134-tvaudio.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-tvaudio.c 2005-06-07 15:38:10.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-tvaudio.c 2005-06-12 01:22:34.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-tvaudio.c,v 1.22 2005/01/07 13:11:19 kraxel Exp $
+ * $Id: saa7134-tvaudio.c,v 1.25 2005/06/07 19:00:38 nsh Exp $
*
* device driver for philips saa7134 based TV cards
* tv audio decoder (fm stereo, nicam, ...)
@@ -181,7 +181,8 @@
saa_writeb(SAA7134_AUDIO_CLOCK0, clock & 0xff);
saa_writeb(SAA7134_AUDIO_CLOCK1, (clock >> 8) & 0xff);
saa_writeb(SAA7134_AUDIO_CLOCK2, (clock >> 16) & 0xff);
- saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x01);
+ // frame locked audio was reported not to be reliable
+ saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x02);
saa_writeb(SAA7134_NICAM_ERROR_LOW, 0x14);
saa_writeb(SAA7134_NICAM_ERROR_HIGH, 0x50);
@@ -250,7 +251,12 @@
saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, 0xc0, ausel);
saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x08, ics);
saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x07, ocs);
-
+ // for oss, we need to change the clock configuration
+ if (in->amux == TV)
+ saa_andorb(SAA7134_SIF_SAMPLE_FREQ, 0x03, 0x00);
+ else
+ saa_andorb(SAA7134_SIF_SAMPLE_FREQ, 0x03, 0x01);
+
/* switch gpio-connected external audio mux */
if (0 == card(dev).gpiomask)
return;
@@ -439,16 +445,15 @@
nicam = saa_readb(SAA7134_NICAM_STATUS);
dprintk("getstereo: nicam=0x%x\n",nicam);
switch (nicam & 0x0b) {
+ case 0x08:
+ retval = V4L2_TUNER_SUB_MONO;
+ break;
case 0x09:
retval = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
break;
case 0x0a:
retval = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
break;
- case 0x08:
- default:
- retval = V4L2_TUNER_SUB_MONO;
- break;
}
break;
}
@@ -572,14 +577,14 @@
} else if (0 != dev->last_carrier) {
/* no carrier -- try last detected one as fallback */
carrier = dev->last_carrier;
- printk(KERN_WARNING "%s/audio: audio carrier scan failed, "
+ dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
"using %d.%03d MHz [last detected]\n",
dev->name, carrier/1000, carrier%1000);
} else {
/* no carrier + no fallback -- use default */
carrier = default_carrier;
- printk(KERN_WARNING "%s/audio: audio carrier scan failed, "
+ dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
"using %d.%03d MHz [default]\n",
dev->name, carrier/1000, carrier%1000);
}
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-video.c linux/drivers/media/video/saa7134/saa7134-video.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-video.c 2005-06-07 15:39:55.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-video.c 2005-06-12 01:22:34.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-video.c,v 1.28 2005/02/15 15:59:35 kraxel Exp $
+ * $Id: saa7134-video.c,v 1.30 2005/06/07 19:00:38 nsh Exp $
*
* device driver for philips saa7134 based TV cards
* video4linux video interface
@@ -31,8 +31,6 @@
#include "saa7134-reg.h"
#include "saa7134.h"
-#define V4L2_I2C_CLIENTS 1
-
/* ------------------------------------------------------------------ */
static unsigned int video_debug = 0;
@@ -276,13 +274,14 @@
.h_start = 0,
.h_stop = 719,
- .video_v_start = 23,
- .video_v_stop = 262,
- .vbi_v_start_0 = 10,
- .vbi_v_stop_0 = 21,
- .vbi_v_start_1 = 273,
- .src_timing = 7,
-
+ .video_v_start = 22,
+ .video_v_start = 23,
+ .video_v_stop = 262,
+ .vbi_v_start_0 = 10,
+ .vbi_v_stop_0 = 21,
+ .vbi_v_start_1 = 273,
+ .src_timing = 7,
+
.sync_control = 0x18,
.luma_control = 0x40,
.chroma_ctrl1 = 0x81,
@@ -524,22 +523,7 @@
saa_writeb(SAA7134_RAW_DATA_GAIN, 0x40);
saa_writeb(SAA7134_RAW_DATA_OFFSET, 0x80);
-#ifdef V4L2_I2C_CLIENTS
saa7134_i2c_call_clients(dev,VIDIOC_S_STD,&norm->id);
-#else
- {
- /* pass down info to the i2c chips (v4l1) */
- struct video_channel c;
- memset(&c,0,sizeof(c));
- c.channel = dev->ctl_input;
- c.norm = VIDEO_MODE_PAL;
- if (norm->id & V4L2_STD_NTSC)
- c.norm = VIDEO_MODE_NTSC;
- if (norm->id & V4L2_STD_SECAM)
- c.norm = VIDEO_MODE_SECAM;
- saa7134_i2c_call_clients(dev,VIDIOCSCHAN,&c);
- }
-#endif
}
static void video_mux(struct saa7134_dev *dev, int input)
@@ -1883,11 +1867,9 @@
return -EINVAL;
down(&dev->lock);
dev->ctl_freq = f->frequency;
-#ifdef V4L2_I2C_CLIENTS
+
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,f);
-#else
- saa7134_i2c_call_clients(dev,VIDIOCSFREQ,&dev->ctl_freq);
-#endif
+
saa7134_tvaudio_do_scan(dev);
up(&dev->lock);
return 0;
@@ -2142,16 +2124,19 @@
t->rangelow = (int)(65*16);
t->rangehigh = (int)(108*16);
-#ifdef V4L2_I2C_CLIENTS
- saa7134_i2c_call_clients(dev,VIDIOC_G_TUNER,t);
-#else
- {
- struct video_tuner vt;
- memset(&vt,0,sizeof(vt));
- saa7134_i2c_call_clients(dev,VIDIOCGTUNER,&vt);
- t->signal = vt.signal;
- }
-#endif
+ saa7134_i2c_call_clients(dev, VIDIOC_G_TUNER, t);
+
+ return 0;
+ }
+ case VIDIOC_S_TUNER:
+ {
+ struct v4l2_tuner *t = arg;
+
+ if (0 != t->index)
+ return -EINVAL;
+
+ saa7134_i2c_call_clients(dev,VIDIOC_S_TUNER,t);
+
return 0;
}
case VIDIOC_ENUMINPUT:
@@ -2185,7 +2170,6 @@
return 0;
}
case VIDIOC_S_AUDIO:
- case VIDIOC_S_TUNER:
case VIDIOC_S_INPUT:
case VIDIOC_S_STD:
return 0;
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-vbi.c linux/drivers/media/video/saa7134/saa7134-vbi.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-vbi.c 2005-06-07 15:39:55.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-vbi.c 2005-06-12 01:22:34.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-vbi.c,v 1.6 2004/12/10 12:33:39 kraxel Exp $
+ * $Id: saa7134-vbi.c,v 1.7 2005/05/24 23:13:06 nsh Exp $
*
* device driver for philips saa7134 based TV cards
* video4linux video interface
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-oss.c linux/drivers/media/video/saa7134/saa7134-oss.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-oss.c 2005-06-07 15:38:10.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-oss.c 2005-06-12 01:22:34.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-oss.c,v 1.13 2004/12/10 12:33:39 kraxel Exp $
+ * $Id: saa7134-oss.c,v 1.14 2005/05/18 22:45:16 hhackmann Exp $
*
* device driver for philips saa7134 based TV cards
* oss dsp interface
@@ -49,7 +49,6 @@
static int dsp_buffer_conf(struct saa7134_dev *dev, int blksize, int blocks)
{
- blksize &= ~0xff;
if (blksize < 0x100)
blksize = 0x100;
if (blksize > 0x10000)
@@ -57,8 +56,6 @@
if (blocks < 2)
blocks = 2;
- while ((blksize * blocks) & ~PAGE_MASK)
- blocks++;
if ((blksize * blocks) > 1024*1024)
blocks = 1024*1024 / blksize;
@@ -79,7 +76,7 @@
BUG();
videobuf_dma_init(&dev->oss.dma);
err = videobuf_dma_init_kernel(&dev->oss.dma, PCI_DMA_FROMDEVICE,
- dev->oss.bufsize >> PAGE_SHIFT);
+ (dev->oss.bufsize + PAGE_SIZE) >> PAGE_SHIFT);
if (0 != err)
return err;
return 0;
@@ -163,10 +160,11 @@
fmt |= 0x04;
fmt |= (TV == dev->oss.input) ? 0xc0 : 0x80;
- saa_writeb(SAA7134_NUM_SAMPLES0, (dev->oss.blksize & 0x0000ff));
- saa_writeb(SAA7134_NUM_SAMPLES1, (dev->oss.blksize & 0x00ff00) >> 8);
- saa_writeb(SAA7134_NUM_SAMPLES2, (dev->oss.blksize & 0xff0000) >> 16);
+ saa_writeb(SAA7134_NUM_SAMPLES0, ((dev->oss.blksize - 1) & 0x0000ff));
+ saa_writeb(SAA7134_NUM_SAMPLES1, ((dev->oss.blksize - 1) & 0x00ff00) >> 8);
+ saa_writeb(SAA7134_NUM_SAMPLES2, ((dev->oss.blksize - 1) & 0xff0000) >> 16);
saa_writeb(SAA7134_AUDIO_FORMAT_CTRL, fmt);
+
break;
case PCI_DEVICE_ID_PHILIPS_SAA7133:
case PCI_DEVICE_ID_PHILIPS_SAA7135:
@@ -817,7 +815,7 @@
reg = SAA7134_RS_BA1(6);
} else {
/* even */
- if (0 == (dev->oss.dma_blk & 0x00))
+ if (1 == (dev->oss.dma_blk & 0x01))
reg = SAA7134_RS_BA2(6);
}
if (0 == reg) {
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-input.c linux/drivers/media/video/saa7134/saa7134-input.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-input.c 2005-06-07 15:38:10.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-input.c 2005-06-12 01:22:34.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-input.c,v 1.16 2004/12/10 12:33:39 kraxel Exp $
+ * $Id: saa7134-input.c,v 1.19 2005/06/07 18:02:26 nsh Exp $
*
* handle saa7134 IR remotes via linux kernel input layer.
*
@@ -308,6 +308,102 @@
[ 32 ] = KEY_LANGUAGE,
[ 33 ] = KEY_SLEEP,
};
+
+/* Michael Tokarev <[email protected]>
+ http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
+ keytable is used by MANLI MTV00[12] and BeholdTV 40[13] at
+ least, and probably other cards too.
+ The "ascii-art picture" below (in comments, first row
+ is the keycode in hex, and subsequent row(s) shows
+ the button labels (several variants when appropriate)
+ helps to descide which keycodes to assign to the buttons.
+ */
+static IR_KEYTAB_TYPE manli_codes[IR_KEYTAB_SIZE] = {
+
+ /* 0x1c 0x12 *
+ * FUNCTION POWER *
+ * FM (|) *
+ * */
+ [ 0x1c ] = KEY_RADIO, /*XXX*/
+ [ 0x12 ] = KEY_POWER,
+
+ /* 0x01 0x02 0x03 *
+ * 1 2 3 *
+ * *
+ * 0x04 0x05 0x06 *
+ * 4 5 6 *
+ * *
+ * 0x07 0x08 0x09 *
+ * 7 8 9 *
+ * */
+ [ 0x01 ] = KEY_KP1,
+ [ 0x02 ] = KEY_KP2,
+ [ 0x03 ] = KEY_KP3,
+ [ 0x04 ] = KEY_KP4,
+ [ 0x05 ] = KEY_KP5,
+ [ 0x06 ] = KEY_KP6,
+ [ 0x07 ] = KEY_KP7,
+ [ 0x08 ] = KEY_KP8,
+ [ 0x09 ] = KEY_KP9,
+
+ /* 0x0a 0x00 0x17 *
+ * RECALL 0 +100 *
+ * PLUS *
+ * */
+ [ 0x0a ] = KEY_AGAIN, /*XXX KEY_REWIND? */
+ [ 0x00 ] = KEY_KP0,
+ [ 0x17 ] = KEY_DIGITS, /*XXX*/
+
+ /* 0x14 0x10 *
+ * MENU INFO *
+ * OSD */
+ [ 0x14 ] = KEY_MENU,
+ [ 0x10 ] = KEY_INFO,
+
+ /* 0x0b *
+ * Up *
+ * *
+ * 0x18 0x16 0x0c *
+ * Left Ok Right *
+ * *
+ * 0x015 *
+ * Down *
+ * */
+ [ 0x0b ] = KEY_UP, /*XXX KEY_SCROLLUP? */
+ [ 0x18 ] = KEY_LEFT, /*XXX KEY_BACK? */
+ [ 0x16 ] = KEY_OK, /*XXX KEY_SELECT? KEY_ENTER? */
+ [ 0x0c ] = KEY_RIGHT, /*XXX KEY_FORWARD? */
+ [ 0x15 ] = KEY_DOWN, /*XXX KEY_SCROLLDOWN? */
+
+ /* 0x11 0x0d *
+ * TV/AV MODE *
+ * SOURCE STEREO *
+ * */
+ [ 0x11 ] = KEY_TV, /*XXX*/
+ [ 0x0d ] = KEY_MODE, /*XXX there's no KEY_STEREO */
+
+ /* 0x0f 0x1b 0x1a *
+ * AUDIO Vol+ Chan+ *
+ * TIMESHIFT??? *
+ * *
+ * 0x0e 0x1f 0x1e *
+ * SLEEP Vol- Chan- *
+ * */
+ [ 0x0f ] = KEY_AUDIO,
+ [ 0x1b ] = KEY_VOLUMEUP,
+ [ 0x1a ] = KEY_CHANNELUP,
+ [ 0x0e ] = KEY_SLEEP, /*XXX maybe KEY_PAUSE */
+ [ 0x1f ] = KEY_VOLUMEDOWN,
+ [ 0x1e ] = KEY_CHANNELDOWN,
+
+ /* 0x13 0x19 *
+ * MUTE SNAPSHOT*
+ * */
+ [ 0x13 ] = KEY_MUTE,
+ [ 0x19 ] = KEY_RECORD, /*XXX*/
+
+ // 0x1d unused ?
+};
/* ---------------------------------------------------------------------- */
static int build_key(struct saa7134_dev *dev)
@@ -379,7 +475,7 @@
switch (dev->board) {
case SAA7134_BOARD_FLYVIDEO2000:
case SAA7134_BOARD_FLYVIDEO3000:
- case SAA7134_BOARD_FLYTVPLATINUM_FM:
+ case SAA7134_BOARD_FLYTVPLATINUM_FM:
ir_codes = flyvideo_codes;
mask_keycode = 0xEC00000;
mask_keydown = 0x0040000;
@@ -405,8 +501,12 @@
polling = 50; // ms
break;
case SAA7134_BOARD_MD2819:
+ case SAA7134_BOARD_KWORLD_VSTREAM_XPERT:
case SAA7134_BOARD_AVERMEDIA_305:
case SAA7134_BOARD_AVERMEDIA_307:
+ case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
+ case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
+ case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
ir_codes = md2819_codes;
mask_keycode = 0x0007C8;
mask_keydown = 0x000010;
@@ -415,6 +515,14 @@
saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
break;
+ case SAA7134_BOARD_MANLI_MTV001:
+ case SAA7134_BOARD_MANLI_MTV002:
+ ir_codes = manli_codes;
+ mask_keycode = 0x001f00;
+ mask_keyup = 0x004000;
+ mask_keydown = 0x002000;
+ polling = 50; // ms
+ break;
case SAA7134_BOARD_VIDEOMATE_TV_PVR:
ir_codes = videomate_tv_pvr_codes;
mask_keycode = 0x00003F;
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-empress.c linux/drivers/media/video/saa7134/saa7134-empress.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-empress.c 2005-06-07 15:38:10.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-empress.c 2005-06-12 01:22:34.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-empress.c,v 1.10 2005/02/03 10:24:33 kraxel Exp $
+ * $Id: saa7134-empress.c,v 1.11 2005/05/22 19:23:39 nsh Exp $
*
* (c) 2004 Gerd Knorr <[email protected]> [SuSE Labs]
*
diff -u linux-2.6.12/drivers/media/video/saa7134/saa7134-dvb.c linux/drivers/media/video/saa7134/saa7134-dvb.c
--- linux-2.6.12/drivers/media/video/saa7134/saa7134-dvb.c 2005-06-07 15:38:10.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa7134-dvb.c 2005-06-12 01:22:34.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: saa7134-dvb.c,v 1.12 2005/02/18 12:28:29 kraxel Exp $
+ * $Id: saa7134-dvb.c,v 1.13 2005/06/12 04:19:19 mchehab Exp $
*
* (c) 2004 Gerd Knorr <[email protected]> [SuSE Labs]
*
@@ -171,7 +171,7 @@
struct saa7134_dev *dev = fe->dvb->priv;
return request_firmware(fw, name, &dev->pci->dev);
}
-
+
static struct tda1004x_config medion_cardbus = {
.demod_address = 0x08, /* not sure this is correct */
.invert = 0,
diff -u linux-2.6.12/drivers/media/video/saa7134/saa6752hs.c linux/drivers/media/video/saa7134/saa6752hs.c
--- linux-2.6.12/drivers/media/video/saa7134/saa6752hs.c 2005-06-07 15:39:55.000000000 -0300
+++ linux/drivers/media/video/saa7134/saa6752hs.c 2005-06-12 01:22:34.000000000 -0300
@@ -22,6 +22,7 @@
/* Addresses to scan */
static unsigned short normal_i2c[] = {0x20, I2C_CLIENT_END};
+static unsigned short normal_i2c_range[] = {I2C_CLIENT_END};
I2C_CLIENT_INSMOD;
MODULE_DESCRIPTION("device driver for saa6752hs MPEG2 encoder");
@@ -42,15 +43,15 @@
static const struct v4l2_format v4l2_format_table[] =
{
[SAA6752HS_VF_D1] = {
- .fmt = { .pix = { .width = 720, .height = 576 }, }, },
+ .fmt.pix.width = 720, .fmt.pix.height = 576 },
[SAA6752HS_VF_2_3_D1] = {
- .fmt = { .pix = { .width = 480, .height = 576 }, }, },
+ .fmt.pix.width = 480, .fmt.pix.height = 576 },
[SAA6752HS_VF_1_2_D1] = {
- .fmt = { .pix = { .width = 352, .height = 576 }, }, },
+ .fmt.pix.width = 352, .fmt.pix.height = 576 },
[SAA6752HS_VF_SIF] = {
- .fmt = { .pix = { .width = 352, .height = 288 }, }, },
+ .fmt.pix.width = 352, .fmt.pix.height = 288 },
[SAA6752HS_VF_UNKNOWN] = {
- .fmt = { .pix = { .width = 0, .height = 0 }, }, },
+ .fmt.pix.width = 0, .fmt.pix.height = 0},
};
struct saa6752hs_state {
diff -u linux-2.6.12/include/media/tveeprom.h linux/include/media/tveeprom.h
--- linux-2.6.12/include/media/tveeprom.h 2005-05-25 00:31:20.000000000 -0300
+++ linux/include/media/tveeprom.h 2005-06-12 01:22:34.000000000 -0300
@@ -1,3 +1,7 @@
+/*
+ * $Id: tveeprom.h,v 1.2 2005/06/12 04:19:19 mchehab Exp $
+ */
+
struct tveeprom {
u32 has_radio;
diff -u linux-2.6.12/drivers/media/video/tveeprom.c linux/drivers/media/video/tveeprom.c
--- linux-2.6.12/drivers/media/video/tveeprom.c 2005-06-07 15:39:55.000000000 -0300
+++ linux/drivers/media/video/tveeprom.c 2005-06-12 01:22:34.000000000 -0300
@@ -75,7 +75,7 @@
{ 0x00000007, "PAL(B/G)" },
{ 0x00001000, "NTSC(M)" },
{ 0x00000010, "PAL(I)" },
- { 0x00400000, "SECAM(L/L�)" },
+ { 0x00400000, "SECAM(L/L´)" },
{ 0x00000e00, "PAL(D/K)" },
{ 0x03000000, "ATSC Digital" },
};
@@ -482,6 +482,7 @@
0xa0 >> 1,
I2C_CLIENT_END,
};
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
struct i2c_driver i2c_driver_tveeprom;
diff -u linux-2.6.12/drivers/media/video/v4l1-compat.c linux/drivers/media/video/v4l1-compat.c
--- linux-2.6.12/drivers/media/video/v4l1-compat.c 2005-05-25 00:31:20.000000000 -0300
+++ linux/drivers/media/video/v4l1-compat.c 2005-06-12 01:22:34.000000000 -0300
@@ -1,4 +1,6 @@
/*
+ * $Id: v4l1-compat.c,v 1.9 2005/06/12 04:19:19 mchehab Exp $
+ *
* Video for Linux Two
* Backward Compatibility Layer
*
@@ -15,14 +17,11 @@
*
*/
-#ifndef __KERNEL__
-#define __KERNEL__
-#endif
-
#include <linux/config.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -787,12 +786,15 @@
!(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED))
aud->step = qctrl2.step;
aud->mode = 0;
+
+ memset(&tun2,0,sizeof(tun2));
err = drv(inode, file, VIDIOC_G_TUNER, &tun2);
if (err < 0) {
dprintk("VIDIOCGAUDIO / VIDIOC_G_TUNER: %d\n",err);
err = 0;
break;
}
+
if (tun2.rxsubchans & V4L2_TUNER_SUB_LANG2)
aud->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
else if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO)
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
