Ingo Molnar wrote:
> how were interrupt response times measured, precisely? What did the
> target (measured) system have to do to respond to an interrupt? Did you
> use the RTC to measure IRQ latencies?
The logger used two TSC values. One prior to shooting the interrupt to the
target, and one when receiving the response. Responding to an interrupt
meant that a driver was hooked to the target's parallel port interrupt and
simply acted by toggling an output pin on the parallel port, which in turn
was hooked onto the logger's parallel port in a similar fashion. We'll
post the code for all components (both logger and target) for everyone to
review. There's no validity in any tests if others can't analyze/criticize/
duplicate.
Karim
--
Author, Speaker, Developer, Consultant
Pushing Embedded and Real-Time Linux Systems Beyond the Limits
http://www.opersys.com || [email protected] || 1-866-677-4546
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
