This patch synchronizes current bttv support on V4L with linux kernel
and adds support to Adlink RTV24 card.
It is asked that *every* patch to V4L stuff to be first submitted to
[email protected].
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Peter Skipworth <[email protected]>
Signed-off-by: Nickolay V Shmyrev <[email protected]>
diff -u linux-2.6.12/drivers/media/video/bttv.h linux/drivers/media/video/bttv.h
--- linux-2.6.12/drivers/media/video/bttv.h 2005-06-07 15:39:55.000000000 -0300
+++ linux/drivers/media/video/bttv.h 2005-06-10 14:21:25.000000000 -0300
@@ -1,5 +1,5 @@
/*
- * $Id: bttv.h,v 1.17 2005/02/22 14:06:32 kraxel Exp $
+ * $Id: bttv.h,v 1.18 2005/05/24 23:41:42 nsh Exp $
*
* bttv - Bt848 frame grabber driver
*
@@ -135,7 +135,7 @@
#define BTTV_DVICO_DVBT_LITE 0x80
#define BTTV_TIBET_CS16 0x83
#define BTTV_KODICOM_4400R 0x84
-#define BTTV_ADLINK_RTV24 0x86
+#define BTTV_ADLINK_RTV24 0x85
/* i2c address list */
#define I2C_TSA5522 0xc2
diff -u linux-2.6.12/drivers/media/video/bttvp.h linux/drivers/media/video/bttvp.h
--- linux-2.6.12/drivers/media/video/bttvp.h 2005-06-07 15:38:09.000000000 -0300
+++ linux/drivers/media/video/bttvp.h 2005-06-10 14:21:25.000000000 -0300
@@ -229,6 +229,7 @@
/* our devices */
#define BTTV_MAX 16
extern unsigned int bttv_num;
+extern struct bttv bttvs[BTTV_MAX];
#define BTTV_MAX_FBUF 0x208000
#define VBIBUF_SIZE (2048*VBI_MAXLINES*2)
@@ -375,7 +376,6 @@
unsigned int users;
struct bttv_fh init;
};
-extern struct bttv bttvs[BTTV_MAX];
/* private ioctls */
#define BTTV_VERSION _IOR('v' , BASE_VIDIOCPRIVATE+6, int)
diff -u linux-2.6.12/drivers/media/video/bttv-driver.c linux/drivers/media/video/bttv-driver.c
--- linux-2.6.12/drivers/media/video/bttv-driver.c 2005-06-07 15:38:09.000000000 -0300
+++ linux/drivers/media/video/bttv-driver.c 2005-06-10 14:21:25.000000000 -0300
@@ -1,5 +1,5 @@
/*
- $Id: bttv-driver.c,v 1.37 2005/02/21 13:57:59 kraxel Exp $
+ $Id: bttv-driver.c,v 1.38 2005/06/10 17:20:24 mchehab Exp $
bttv - Bt848 frame grabber driver
diff -u linux-2.6.12/drivers/media/video/bttv-cards.c linux/drivers/media/video/bttv-cards.c
--- linux-2.6.12/drivers/media/video/bttv-cards.c 2005-06-07 15:39:55.000000000 -0300
+++ linux/drivers/media/video/bttv-cards.c 2005-06-10 14:21:25.000000000 -0300
@@ -1,5 +1,5 @@
/*
- $Id: bttv-cards.c,v 1.47 2005/02/22 14:06:32 kraxel Exp $
+ $Id: bttv-cards.c,v 1.49 2005/06/10 17:20:24 mchehab Exp $
bttv-cards.c
@@ -2254,17 +2254,18 @@
.muxsel_hook = kodicom4400r_muxsel,
},
{
- /* ---- card 0x86---------------------------------- */
- /* Michael Henson <[email protected]> */
- /* Adlink RTV24 with special unlock codes */
- .name = "Adlink RTV24",
- .video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 2,
- .muxsel = { 2, 3, 1, 0},
- .tuner_type = -1,
- .pll = PLL_28,
+ /* ---- card 0x85---------------------------------- */
+ /* Michael Henson <[email protected]> */
+ /* Adlink RTV24 with special unlock codes */
+ .name = "Adlink RTV24",
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .muxsel = { 2, 3, 1, 0},
+ .tuner_type = -1,
+ .pll = PLL_28,
+
}};
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
@@ -2650,6 +2651,10 @@
case BTTV_AVDVBT_771:
btv->use_i2c_hw = 1;
break;
+ case BTTV_ADLINK_RTV24:
+ init_RTV24( btv );
+ break;
+
}
if (!bttv_tvcards[btv->c.type].has_dvb)
bttv_reset_audio(btv);
@@ -2762,9 +2767,6 @@
case BTTV_KODICOM_4400R:
kodicom4400r_init(btv);
break;
- case BTTV_ADLINK_RTV24:
- init_RTV24(btv);
- break;
}
/* pll configuration */
@@ -2801,6 +2803,8 @@
}
btv->pll.pll_current = -1;
+ bttv_reset_audio(btv);
+
/* tuner configuration (from card list / autodetect / insmod option) */
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
if(UNSET == btv->tuner_type)
@@ -3320,6 +3324,8 @@
printk(KERN_INFO "PXC200 Initialised.\n");
}
+
+
/* ----------------------------------------------------------------------- */
/*
* The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
@@ -3348,49 +3354,54 @@
* error. ERROR_CPLD_Check_Failed.
*/
/* ----------------------------------------------------------------------- */
-void init_RTV24(struct bttv *btv)
+void
+init_RTV24 (struct bttv *btv)
{
- u32 dataread;
- const long watchdog_value = 0x0E;
+ uint32_t dataRead = 0;
+ long watchdog_value = 0x0E;
- printk(KERN_INFO "bttv%d: Adlink RTV-24 initialisation in progress\n",
+ printk (KERN_INFO
+ "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
btv->c.nr);
- btwrite(0x00c3feff, BT848_GPIO_OUT_EN);
+ btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
+
+ btwrite (0 + watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
+ msleep (10);
+ btwrite (0 + watchdog_value, BT848_GPIO_DATA);
+
+ dataRead = btread (BT848_GPIO_DATA);
+
+ if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
+ printk (KERN_INFO
+ "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
+ btv->c.nr, dataRead);
+ }
+
+ btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
+ msleep (10);
+ btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ btwrite (watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ dataRead = btread (BT848_GPIO_DATA);
+
+ if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
+ printk (KERN_INFO
+ "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
+ btv->c.nr, dataRead);
- btwrite(0 + watchdog_value, BT848_GPIO_DATA);
- msleep(1);
- btwrite(0x10 + watchdog_value, BT848_GPIO_DATA);
- msleep( 10 );
- btwrite(0 + watchdog_value, BT848_GPIO_DATA);
-
- dataread = btread(BT848_GPIO_DATA);
-
- if (((dataread >> 18) & 0x01) != 0 || ((dataread >> 19) & 0x01) != 1) {
- printk(KERN_INFO "bttv%d: Adlink RTV-24 initialisation(1) "
- "ERROR_CPLD_Check_Failed (read %d)\n",
- btv->c.nr, dataread);
- }
-
- btwrite(0x4400 + watchdog_value, BT848_GPIO_DATA);
- msleep(10);
- btwrite(0x4410 + watchdog_value, BT848_GPIO_DATA);
- msleep(1);
- btwrite(watchdog_value, BT848_GPIO_DATA);
- msleep(1);
- dataread = btread(BT848_GPIO_DATA);
-
- if (((dataread >> 18) & 0x01) != 0 || ((dataread >> 19) & 0x01) != 0) {
- printk(KERN_INFO "bttv%d: Adlink RTV-24 initialisation(2) "
- "ERROR_CPLD_Check_Failed (read %d)\n",
- btv->c.nr, dataread);
return;
}
- printk(KERN_INFO "bttv%d: Adlink RTV-24 initialisation complete.\n",
- btv->c.nr);
+ printk (KERN_INFO
+ "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
}
+
+
/* ----------------------------------------------------------------------- */
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
/*
@@ -4079,7 +4090,7 @@
unsigned char yaddr,
unsigned char data) {
unsigned int udata;
-
+
udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
gpio_bits(0x1ff, udata); /* write ADDR and DAT */
gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
@@ -4100,7 +4111,7 @@
int xaddr, yaddr;
struct bttv *mctlr;
static unsigned char map[4] = {3, 0, 2, 1};
-
+
mctlr = master[btv->c.nr];
if (mctlr == NULL) { /* ignore if master not yet detected */
return;
diff -u linux-2.6.12/drivers/media/video/bttv-i2c.c linux/drivers/media/video/bttv-i2c.c
--- linux-2.6.12/drivers/media/video/bttv-i2c.c 2005-06-07 15:38:09.000000000 -0300
+++ linux/drivers/media/video/bttv-i2c.c 2005-06-10 14:21:25.000000000 -0300
@@ -1,5 +1,5 @@
/*
- $Id: bttv-i2c.c,v 1.18 2005/02/16 12:14:10 kraxel Exp $
+ $Id: bttv-i2c.c,v 1.21 2005/06/10 17:20:24 mchehab Exp $
bttv-i2c.c -- all the i2c code is here
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
