This patch merges a lot of duplicated code in the slip and slirp drivers,
abstracts out the slip protocol, and makes the slip driver work in 2.6.
Signed-off-by: Jeff Dike <[email protected]>
Index: linux-2.6.12-rc/arch/um/drivers/Makefile
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/Makefile 2005-06-08 12:21:17.000000000 -0400
+++ linux-2.6.12-rc/arch/um/drivers/Makefile 2005-06-08 12:54:43.000000000 -0400
@@ -22,8 +22,8 @@ obj-y := stdio_console.o fd.o chan_kern.
obj-$(CONFIG_SSL) += ssl.o
obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o
-obj-$(CONFIG_UML_NET_SLIP) += slip.o
-obj-$(CONFIG_UML_NET_SLIRP) += slirp.o
+obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o
+obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o
obj-$(CONFIG_UML_NET_DAEMON) += daemon.o
obj-$(CONFIG_UML_NET_MCAST) += mcast.o
#obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP)
@@ -41,6 +41,6 @@ obj-$(CONFIG_UML_WATCHDOG) += harddog.o
obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o
obj-$(CONFIG_UML_RANDOM) += random.o
-USER_OBJS := fd.o null.o pty.o tty.o xterm.o
+USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o
include arch/um/scripts/Makefile.rules
Index: linux-2.6.12-rc/arch/um/drivers/slip.h
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slip.h 2005-06-07 10:24:53.000000000 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slip.h 2005-06-08 12:54:43.000000000 -0400
@@ -1,10 +1,7 @@
#ifndef __UM_SLIP_H
#define __UM_SLIP_H
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars + *
- * terminating END char + initial END char */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+#include "slip_common.h"
struct slip_data {
void *dev;
@@ -12,28 +9,12 @@ struct slip_data {
char *addr;
char *gate_addr;
int slave;
- unsigned char ibuf[ENC_BUF_SIZE];
- unsigned char obuf[ENC_BUF_SIZE];
- int more; /* more data: do not read fd until ibuf has been drained */
- int pos;
- int esc;
+ struct slip_proto slip;
};
extern struct net_user_info slip_user_info;
-extern int set_umn_addr(int fd, char *addr, char *ptp_addr);
extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri);
extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
Index: linux-2.6.12-rc/arch/um/drivers/slip_common.c
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slip_common.c 2005-06-08 06:19:43.393768952 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slip_common.c 2005-06-08 12:54:43.000000000 -0400
@@ -0,0 +1,54 @@
+#include <string.h>
+#include "slip_common.h"
+#include "net_user.h"
+
+int slip_proto_read(int fd, void *buf, int len, struct slip_proto *slip)
+{
+ int i, n, size, start;
+
+ if(slip->more > 0){
+ i = 0;
+ while(i < slip->more){
+ size = slip_unesc(slip->ibuf[i++], slip->ibuf,
+ &slip->pos, &slip->esc);
+ if(size){
+ memcpy(buf, slip->ibuf, size);
+ memmove(slip->ibuf, &slip->ibuf[i],
+ slip->more - i);
+ slip->more = slip->more - i;
+ return size;
+ }
+ }
+ slip->more = 0;
+ }
+
+ n = net_read(fd, &slip->ibuf[slip->pos],
+ sizeof(slip->ibuf) - slip->pos);
+ if(n <= 0)
+ return n;
+
+ start = slip->pos;
+ for(i = 0; i < n; i++){
+ size = slip_unesc(slip->ibuf[start + i], slip->ibuf,&slip->pos,
+ &slip->esc);
+ if(size){
+ memcpy(buf, slip->ibuf, size);
+ memmove(slip->ibuf, &slip->ibuf[start+i+1],
+ n - (i + 1));
+ slip->more = n - (i + 1);
+ return size;
+ }
+ }
+ return 0;
+}
+
+int slip_proto_write(int fd, void *buf, int len, struct slip_proto *slip)
+{
+ int actual, n;
+
+ actual = slip_esc(buf, slip->obuf, len);
+ n = net_write(fd, slip->obuf, actual);
+ if(n < 0)
+ return n;
+ else return len;
+}
Index: linux-2.6.12-rc/arch/um/drivers/slip_common.h
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slip_common.h 2005-06-08 06:19:43.393768952 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slip_common.h 2005-06-08 12:54:43.000000000 -0400
@@ -0,0 +1,104 @@
+#ifndef __UM_SLIP_COMMON_H
+#define __UM_SLIP_COMMON_H
+
+#define BUF_SIZE 1500
+ /* two bytes each for a (pathological) max packet of escaped chars + *
+ * terminating END char + initial END char */
+#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+
+/* SLIP protocol characters. */
+#define SLIP_END 0300 /* indicates end of frame */
+#define SLIP_ESC 0333 /* indicates byte stuffing */
+#define SLIP_ESC_END 0334 /* ESC ESC_END means END 'data' */
+#define SLIP_ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */
+
+static inline int slip_unesc(unsigned char c, unsigned char *buf, int *pos,
+ int *esc)
+{
+ int ret;
+
+ switch(c){
+ case SLIP_END:
+ *esc = 0;
+ ret=*pos;
+ *pos=0;
+ return(ret);
+ case SLIP_ESC:
+ *esc = 1;
+ return(0);
+ case SLIP_ESC_ESC:
+ if(*esc){
+ *esc = 0;
+ c = SLIP_ESC;
+ }
+ break;
+ case SLIP_ESC_END:
+ if(*esc){
+ *esc = 0;
+ c = SLIP_END;
+ }
+ break;
+ }
+ buf[(*pos)++] = c;
+ return(0);
+}
+
+static inline int slip_esc(unsigned char *s, unsigned char *d, int len)
+{
+ unsigned char *ptr = d;
+ unsigned char c;
+
+ /*
+ * Send an initial END character to flush out any
+ * data that may have accumulated in the receiver
+ * due to line noise.
+ */
+
+ *ptr++ = SLIP_END;
+
+ /*
+ * For each byte in the packet, send the appropriate
+ * character sequence, according to the SLIP protocol.
+ */
+
+ while (len-- > 0) {
+ switch(c = *s++) {
+ case SLIP_END:
+ *ptr++ = SLIP_ESC;
+ *ptr++ = SLIP_ESC_END;
+ break;
+ case SLIP_ESC:
+ *ptr++ = SLIP_ESC;
+ *ptr++ = SLIP_ESC_ESC;
+ break;
+ default:
+ *ptr++ = c;
+ break;
+ }
+ }
+ *ptr++ = SLIP_END;
+ return (ptr - d);
+}
+
+struct slip_proto {
+ unsigned char ibuf[ENC_BUF_SIZE];
+ unsigned char obuf[ENC_BUF_SIZE];
+ int more; /* more data: do not read fd until ibuf has been drained */
+ int pos;
+ int esc;
+};
+
+#define SLIP_PROTO_INIT { \
+ .ibuf = { '\0' }, \
+ .obuf = { '\0' }, \
+ .more = 0, \
+ .pos = 0, \
+ .esc = 0 \
+}
+
+extern int slip_proto_read(int fd, void *buf, int len,
+ struct slip_proto *slip);
+extern int slip_proto_write(int fd, void *buf, int len,
+ struct slip_proto *slip);
+
+#endif
Index: linux-2.6.12-rc/arch/um/drivers/slip_kern.c
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slip_kern.c 2005-06-08 11:56:11.000000000 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slip_kern.c 2005-06-08 14:18:59.000000000 -0400
@@ -26,16 +26,16 @@ void slip_init(struct net_device *dev, v
.addr = NULL,
.gate_addr = init->gate_addr,
.slave = -1,
- .ibuf = { '\0' },
- .obuf = { '\0' },
- .pos = 0,
- .esc = 0,
+ .slip = SLIP_PROTO_INIT,
.dev = dev });
dev->init = NULL;
+ dev->header_cache_update = NULL;
+ dev->hard_header_cache = NULL;
+ dev->hard_header = NULL;
dev->hard_header_len = 0;
- dev->addr_len = 4;
- dev->type = ARPHRD_ETHER;
+ dev->addr_len = 0;
+ dev->type = ARPHRD_SLIP;
dev->tx_queue_len = 256;
dev->flags = IFF_NOARP;
printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr);
Index: linux-2.6.12-rc/arch/um/drivers/slip_proto.h
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slip_proto.h 2005-06-07 10:24:53.000000000 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slip_proto.h 2005-06-08 06:19:43.393768952 -0400
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike ([email protected])
- * Licensed under the GPL
- */
-
-#ifndef __UM_SLIP_PROTO_H__
-#define __UM_SLIP_PROTO_H__
-
-/* SLIP protocol characters. */
-#define SLIP_END 0300 /* indicates end of frame */
-#define SLIP_ESC 0333 /* indicates byte stuffing */
-#define SLIP_ESC_END 0334 /* ESC ESC_END means END 'data' */
-#define SLIP_ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */
-
-static inline int slip_unesc(unsigned char c, unsigned char *buf, int *pos,
- int *esc)
-{
- int ret;
-
- switch(c){
- case SLIP_END:
- *esc = 0;
- ret=*pos;
- *pos=0;
- return(ret);
- case SLIP_ESC:
- *esc = 1;
- return(0);
- case SLIP_ESC_ESC:
- if(*esc){
- *esc = 0;
- c = SLIP_ESC;
- }
- break;
- case SLIP_ESC_END:
- if(*esc){
- *esc = 0;
- c = SLIP_END;
- }
- break;
- }
- buf[(*pos)++] = c;
- return(0);
-}
-
-static inline int slip_esc(unsigned char *s, unsigned char *d, int len)
-{
- unsigned char *ptr = d;
- unsigned char c;
-
- /*
- * Send an initial END character to flush out any
- * data that may have accumulated in the receiver
- * due to line noise.
- */
-
- *ptr++ = SLIP_END;
-
- /*
- * For each byte in the packet, send the appropriate
- * character sequence, according to the SLIP protocol.
- */
-
- while (len-- > 0) {
- switch(c = *s++) {
- case SLIP_END:
- *ptr++ = SLIP_ESC;
- *ptr++ = SLIP_ESC_END;
- break;
- case SLIP_ESC:
- *ptr++ = SLIP_ESC;
- *ptr++ = SLIP_ESC_ESC;
- break;
- default:
- *ptr++ = c;
- break;
- }
- }
- *ptr++ = SLIP_END;
- return (ptr - d);
-}
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
Index: linux-2.6.12-rc/arch/um/drivers/slip_user.c
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slip_user.c 2005-06-08 11:56:11.000000000 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slip_user.c 2005-06-08 14:18:59.000000000 -0400
@@ -13,7 +13,7 @@
#include "user.h"
#include "net_user.h"
#include "slip.h"
-#include "slip_proto.h"
+#include "slip_common.h"
#include "helper.h"
#include "os.h"
@@ -77,41 +77,51 @@ static int slip_tramp(char **argv, int f
err = os_pipe(fds, 1, 0);
if(err < 0){
printk("slip_tramp : pipe failed, err = %d\n", -err);
- return(err);
+ goto out;
}
err = 0;
pe_data.stdin = fd;
pe_data.stdout = fds[1];
pe_data.close_me = fds[0];
- pid = run_helper(slip_pre_exec, &pe_data, argv, NULL);
-
- if(pid < 0) err = pid;
- else {
- output_len = page_size();
- output = um_kmalloc(output_len);
- if(output == NULL)
- printk("slip_tramp : failed to allocate output "
- "buffer\n");
-
- os_close_file(fds[1]);
- read_output(fds[0], output, output_len);
- if(output != NULL){
- printk("%s", output);
- kfree(output);
- }
- CATCH_EINTR(err = waitpid(pid, &status, 0));
- if(err < 0)
- err = errno;
- else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){
- printk("'%s' didn't exit with status 0\n", argv[0]);
- err = -EINVAL;
- }
+ err = run_helper(slip_pre_exec, &pe_data, argv, NULL);
+ if(err < 0)
+ goto out_close;
+ pid = err;
+
+ output_len = page_size();
+ output = um_kmalloc(output_len);
+ if(output == NULL){
+ printk("slip_tramp : failed to allocate output buffer\n");
+ os_kill_process(pid, 1);
+ err = -ENOMEM;
+ goto out_free;
+ }
+
+ os_close_file(fds[1]);
+ read_output(fds[0], output, output_len);
+ printk("%s", output);
+
+ CATCH_EINTR(err = waitpid(pid, &status, 0));
+ if(err < 0)
+ err = errno;
+ else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){
+ printk("'%s' didn't exit with status 0\n", argv[0]);
+ err = -EINVAL;
}
+ else err = 0;
os_close_file(fds[0]);
- return(err);
+out_free:
+ kfree(output);
+ return err;
+
+out_close:
+ os_close_file(fds[0]);
+ os_close_file(fds[1]);
+out:
+ return err;
}
static int slip_open(void *data)
@@ -123,21 +133,26 @@ static int slip_open(void *data)
NULL };
int sfd, mfd, err;
- mfd = get_pty();
- if(mfd < 0){
- printk("umn : Failed to open pty, err = %d\n", -mfd);
- return(mfd);
+ err = get_pty();
+ if(err < 0){
+ printk("slip-open : Failed to open pty, err = %d\n", -err);
+ goto out;
}
- sfd = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0);
- if(sfd < 0){
- printk("Couldn't open tty for slip line, err = %d\n", -sfd);
- os_close_file(mfd);
- return(sfd);
+ mfd = err;
+
+ err = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0);
+ if(err < 0){
+ printk("Couldn't open tty for slip line, err = %d\n", -err);
+ goto out_close;
}
- if(set_up_tty(sfd)) return(-1);
+ sfd = err;
+
+ if(set_up_tty(sfd))
+ goto out_close2;
+
pri->slave = sfd;
- pri->pos = 0;
- pri->esc = 0;
+ pri->slip.pos = 0;
+ pri->slip.esc = 0;
if(pri->gate_addr != NULL){
sprintf(version_buf, "%d", UML_NET_VERSION);
strcpy(gate_buf, pri->gate_addr);
@@ -146,12 +161,12 @@ static int slip_open(void *data)
if(err < 0){
printk("slip_tramp failed - err = %d\n", -err);
- return(err);
+ goto out_close2;
}
err = os_get_ifname(pri->slave, pri->name);
if(err < 0){
printk("get_ifname failed, err = %d\n", -err);
- return(err);
+ goto out_close2;
}
iter_addresses(pri->dev, open_addr, pri->name);
}
@@ -160,10 +175,16 @@ static int slip_open(void *data)
if(err < 0){
printk("Failed to set slip discipline encapsulation - "
"err = %d\n", -err);
- return(err);
+ goto out_close2;
}
}
return(mfd);
+out_close2:
+ os_close_file(sfd);
+out_close:
+ os_close_file(mfd);
+out:
+ return err;
}
static void slip_close(int fd, void *data)
@@ -190,48 +211,12 @@ static void slip_close(int fd, void *dat
int slip_user_read(int fd, void *buf, int len, struct slip_data *pri)
{
- int i, n, size, start;
-
- if(pri->more>0) {
- i = 0;
- while(i < pri->more) {
- size = slip_unesc(pri->ibuf[i++],
- pri->ibuf, &pri->pos, &pri->esc);
- if(size){
- memcpy(buf, pri->ibuf, size);
- memmove(pri->ibuf, &pri->ibuf[i], pri->more-i);
- pri->more=pri->more-i;
- return(size);
- }
- }
- pri->more=0;
- }
-
- n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos);
- if(n <= 0) return(n);
-
- start = pri->pos;
- for(i = 0; i < n; i++){
- size = slip_unesc(pri->ibuf[start + i],
- pri->ibuf, &pri->pos, &pri->esc);
- if(size){
- memcpy(buf, pri->ibuf, size);
- memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1));
- pri->more=n-(i+1);
- return(size);
- }
- }
- return(0);
+ return slip_proto_read(fd, buf, len, &pri->slip);
}
int slip_user_write(int fd, void *buf, int len, struct slip_data *pri)
{
- int actual, n;
-
- actual = slip_esc(buf, pri->obuf, len);
- n = net_write(fd, pri->obuf, actual);
- if(n < 0) return(n);
- else return(len);
+ return slip_proto_write(fd, buf, len, &pri->slip);
}
static int slip_set_mtu(int mtu, void *data)
@@ -267,14 +252,3 @@ struct net_user_info slip_user_info = {
.delete_address = slip_del_addr,
.max_packet = BUF_SIZE
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
Index: linux-2.6.12-rc/arch/um/drivers/slirp.h
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slirp.h 2005-06-07 10:24:53.000000000 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slirp.h 2005-06-08 12:54:43.000000000 -0400
@@ -1,10 +1,7 @@
#ifndef __UM_SLIRP_H
#define __UM_SLIRP_H
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars + *
- * terminating END char + initial END char */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+#include "slip_common.h"
#define SLIRP_MAX_ARGS 100
/*
@@ -24,28 +21,13 @@ struct slirp_data {
struct arg_list_dummy_wrapper argw;
int pid;
int slave;
- unsigned char ibuf[ENC_BUF_SIZE];
- unsigned char obuf[ENC_BUF_SIZE];
- int more; /* more data: do not read fd until ibuf has been drained */
- int pos;
- int esc;
+ struct slip_proto slip;
};
extern struct net_user_info slirp_user_info;
-extern int set_umn_addr(int fd, char *addr, char *ptp_addr);
extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri);
-extern int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri);
+extern int slirp_user_write(int fd, void *buf, int len,
+ struct slirp_data *pri);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
Index: linux-2.6.12-rc/arch/um/drivers/slirp_kern.c
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slirp_kern.c 2005-06-08 11:56:11.000000000 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slirp_kern.c 2005-06-08 14:18:51.000000000 -0400
@@ -25,10 +25,7 @@ void slirp_init(struct net_device *dev,
{ .argw = init->argw,
.pid = -1,
.slave = -1,
- .ibuf = { '\0' },
- .obuf = { '\0' },
- .pos = 0,
- .esc = 0,
+ .slip = SLIP_PROTO_INIT,
.dev = dev });
dev->init = NULL;
Index: linux-2.6.12-rc/arch/um/drivers/slirp_user.c
===================================================================
--- linux-2.6.12-rc.orig/arch/um/drivers/slirp_user.c 2005-06-08 11:56:11.000000000 -0400
+++ linux-2.6.12-rc/arch/um/drivers/slirp_user.c 2005-06-08 12:54:43.000000000 -0400
@@ -12,7 +12,7 @@
#include "user.h"
#include "net_user.h"
#include "slirp.h"
-#include "slip_proto.h"
+#include "slip_common.h"
#include "helper.h"
#include "os.h"
@@ -48,47 +48,32 @@ static int slirp_tramp(char **argv, int
return(pid);
}
-/* XXX This is just a trivial wrapper around os_pipe */
-static int slirp_datachan(int *mfd, int *sfd)
-{
- int fds[2], err;
-
- err = os_pipe(fds, 1, 1);
- if(err < 0){
- printk("slirp_datachan: Failed to open pipe, err = %d\n", -err);
- return(err);
- }
-
- *mfd = fds[0];
- *sfd = fds[1];
- return(0);
-}
-
static int slirp_open(void *data)
{
struct slirp_data *pri = data;
- int sfd, mfd, pid, err;
+ int fds[2], pid, err;
- err = slirp_datachan(&mfd, &sfd);
+ err = os_pipe(fds, 1, 1);
if(err)
return(err);
- pid = slirp_tramp(pri->argw.argv, sfd);
-
- if(pid < 0){
- printk("slirp_tramp failed - errno = %d\n", -pid);
- os_close_file(sfd);
- os_close_file(mfd);
- return(pid);
+ err = slirp_tramp(pri->argw.argv, fds[1]);
+ if(err < 0){
+ printk("slirp_tramp failed - errno = %d\n", -err);
+ goto out;
}
+ pid = err;
- pri->slave = sfd;
- pri->pos = 0;
- pri->esc = 0;
-
- pri->pid = pid;
-
- return(mfd);
+ pri->slave = fds[1];
+ pri->slip.pos = 0;
+ pri->slip.esc = 0;
+ pri->pid = err;
+
+ return(fds[0]);
+out:
+ os_close_file(fds[0]);
+ os_close_file(fds[1]);
+ return err;
}
static void slirp_close(int fd, void *data)
@@ -129,48 +114,12 @@ static void slirp_close(int fd, void *da
int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri)
{
- int i, n, size, start;
-
- if(pri->more>0) {
- i = 0;
- while(i < pri->more) {
- size = slip_unesc(pri->ibuf[i++],
- pri->ibuf,&pri->pos,&pri->esc);
- if(size){
- memcpy(buf, pri->ibuf, size);
- memmove(pri->ibuf, &pri->ibuf[i], pri->more-i);
- pri->more=pri->more-i;
- return(size);
- }
- }
- pri->more=0;
- }
-
- n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos);
- if(n <= 0) return(n);
-
- start = pri->pos;
- for(i = 0; i < n; i++){
- size = slip_unesc(pri->ibuf[start + i],
- pri->ibuf,&pri->pos,&pri->esc);
- if(size){
- memcpy(buf, pri->ibuf, size);
- memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1));
- pri->more=n-(i+1);
- return(size);
- }
- }
- return(0);
+ return slip_proto_read(fd, buf, len, &pri->slip);
}
int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri)
{
- int actual, n;
-
- actual = slip_esc(buf, pri->obuf, len);
- n = net_write(fd, pri->obuf, actual);
- if(n < 0) return(n);
- else return(len);
+ return slip_proto_write(fd, buf, len, &pri->slip);
}
static int slirp_set_mtu(int mtu, void *data)
@@ -188,14 +137,3 @@ struct net_user_info slirp_user_info = {
.delete_address = NULL,
.max_packet = BUF_SIZE
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
