Re: oops 2.6.11 and 2.6.12-rc6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please always do reply-to-all around here, might get missed otherwise

> > > I have a production server that has not booted any kernel I've tried sense
> > > 2.6.10.
> > > I captured this oops by *hand* this morning when trying to boot 2.6.12-rc6.
> > > 
> > > I've included the decoded oops, lspci -vvv, .config and ver_linux information.
> > > 
> > > Unlike most cases this is a prodution machine and I have limited time to test patches. :(
> > > 
> > 
> > Unfortunately the oops text you sent cannot be used for debugging.
> > Please send the oops that 2.6.12-rc6 produces to the list (ksymoops is
> > not necessary on 2.6.x kernels and should not be used!). 
> > Depending on how early the oops happens you can definately use
> > Documentation/serial-console.txt and maybe the somewhat simpler
> > Documentation/networking/netconsole.txt
> > 
> > Please send the non-ksymoopsed oops you wrote off the screen when
> > booting 2.6.12-rc6
> > 
> > Thanks
> > 
> Here is the bare oops.
> 
> 

It appears you have disabled General setup => Configure standard kernel
=> Load all symbols

Please don't do that without a good reason, makes debugging more
difficult. How much memory is it in the box? Can you put the System.map
somewhere so I can resolve the addresses?

And you said this happened at booting right? hmmpf

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux