Re: Kernel 2.6.12-rc6-mm1 & Chelsio driver

[Lukas Hejtmanek <xhejtman@mail.muni.cz>]

On Tue, Jun 07, 2005 at 10:08:20PM +0200, Francois Romieu wrote:
> -> it does not match your 0006 revision. No wonder nothing gets detected.
> 
> As a quick hack, one could cross fingers and add a
> CH_DEVICE(6, 0, CH_BRD_N110_1F)
> 
> or, if it does not work:
> 
> CH_DEVICE(6, 1, CH_BRD_N210_1F)

I added:

enum {
        CH_BRD_T110_1F,
        CH_BRD_N110_1F,
        CH_BRD_N210_1F,
        CH_BRD_T210_1F,
};

struct pci_device_id t1_pci_tbl[] = {
        CH_DEVICE(6, 0, CH_BRD_T110_1F),
        CH_DEVICE(6, 1, CH_BRD_T110_1F),
        CH_DEVICE(7, 0, CH_BRD_N110_1F),
        CH_DEVICE(10, 1, CH_BRD_N210_1F),
        { 0, }
};

according to 2.6.6 driver. 

However, it seems to be highly unstable. Using iperf it gets broken. Card 
receives packets but it does not transmit after some iperf tests.

Using tcpdump I see things like this:
tcpdump -ni eth0
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
23:05:03.854587 IP 10.0.0.1 > 10.0.0.2: icmp 64: echo request seq 1
23:05:04.853853 IP 10.0.0.1 > 10.0.0.2: icmp 64: echo request seq 2
23:05:05.853965 IP 10.0.0.1 > 10.0.0.2: icmp 64: echo request seq 3
23:05:06.854079 IP 10.0.0.1 > 10.0.0.2: icmp 64: echo request seq 4
23:05:07.854193 IP 10.0.0.1 > 10.0.0.2: icmp 64: echo request seq 5
 

> If it does not work at all, someone will have to dissect the whole
> thing. Please fill an entry at bugzilla.kernel.org, add it your lspci info
> and make it link the 2.6.6 driver from Chelsio's website.

Should I still add an bugzilla entry? Unfortunately, 2.6.6. driver from website
is accessible only through password.

-- 
Lukáš Hejtmánek
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/