Re: [PROBLEM] aic7xxx: DV failed to configure device

[Denis Zaitsev <zzz@anda.ru>]

On Mon, Jun 06, 2005 at 09:34:37AM -0500, James Bottomley wrote:
> On Mon, 2005-06-06 at 15:03 +0600, Denis Zaitsev wrote:
> > Yes, I'm sorry.  2.6.10.
> 
> That particular code was completely changed for 2.6.12-rc5; could you
> see what that kernel makes of this, please?

Ok, 2.6.12-rc5:


scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 29160 Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

  Vendor: IBM       Model: DDYS-T09170N      Rev: S80D
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
 target0:0:0: Beginning Domain Validation
WIDTH IS 1
(scsi0:A:0): 6.600MB/s transfers (16bit)
 target0:0:0: Domain Validation skipping write tests
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
 target0:0:0: Ending Domain Validation
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
SCSI device sda: drive cache: write back
 sda: unknown partition table
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0


It seems that things are in order, do I understand right?  So, why and
how the low-level format affects the old driver's behaviour?

Thanks in advance.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/