yenta_socket: no PCI interrupts after resume if intel-agp loaded on HP 1105

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If I boot a kernel without any modules loaded and then load intel-agp, I
can successfully suspend and resume this machine via ACPI. However, the
b44 module is then unable to determine its MAC address correctly, and
ipw2100 claims that it can't find a device. yenta_socket gives 

Yenta : Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x00001000, devctl 0x66
Yenta TI: socket 0000:02:06.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 0000:02:06.0 falling back to parallel PCI interrupts
Yenta TI: socket 0000:02:06.0 no PCI interrupts. Fish. Please report.

The only output from the AGP driver is:

agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 32M @ 0xe2000000

If I have all of these drivers loaded at suspend, resume fails. Without
intel-agp, I can suspend and resume happily (well, X won't start after
resume, but that's potentially an entirely separate issue)
-- 
Matthew Garrett | [email protected]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux