Re: PROBLEM: Devices behind PCI Express-to-PCI bridge not mapped

[Ivan Kokshaysky <ink@jurassic.park.msu.ru>]

On Sat, Jun 04, 2005 at 05:57:42PM +0200, Andreas Koch wrote:
> 2) The last messages right before the oops are
> 
>   PCI: Bridge 0000:00:1e.0
>     IO window 1000-6fff
>     MEM window: 01000000-0dffffff

Indeed. From your lspci output:
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])

It's the "transparent" bridge. The code in setup-bus.c doesn't handle this
properly.

Please try this patch - it should fix two problems:
- in pci_setup_bridge() use bridge resources directly, instead of
  the resource pointers in struct pci_bus (this fixes an oops);
- [ioport,iomem]_resource must not be touched in the bus setup code,
  otherwise we screw up the whole resource tree.

Ivan.

--- linux/drivers/pci/setup-bus.c.orig	Thu Apr 21 04:03:14 2005
+++ linux/drivers/pci/setup-bus.c	Sun Jun  5 18:37:57 2005
@@ -149,13 +149,14 @@ pci_setup_bridge(struct pci_bus *bus)
 {
 	struct pci_dev *bridge = bus->self;
 	struct pci_bus_region region;
+	struct resource *b_res= &bridge->resource[PCI_BRIDGE_RESOURCES];
 	u32 l, io_upper16;
 
 	DBG(KERN_INFO "PCI: Bridge: %s\n", pci_name(bridge));
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
-	pcibios_resource_to_bus(bridge, &region, bus->resource[0]);
-	if (bus->resource[0]->flags & IORESOURCE_IO) {
+	pcibios_resource_to_bus(bridge, &region, &b_res[0]);
+	if (b_res[0].flags & IORESOURCE_IO) {
 		pci_read_config_dword(bridge, PCI_IO_BASE, &l);
 		l &= 0xffff0000;
 		l |= (region.start >> 8) & 0x00f0;
@@ -180,8 +181,8 @@ pci_setup_bridge(struct pci_bus *bus)
 
 	/* Set up the top and bottom of the PCI Memory segment
 	   for this bus. */
-	pcibios_resource_to_bus(bridge, &region, bus->resource[1]);
-	if (bus->resource[1]->flags & IORESOURCE_MEM) {
+	pcibios_resource_to_bus(bridge, &region, &b_res[1]);
+	if (b_res[1].flags & IORESOURCE_MEM) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
 		DBG(KERN_INFO "  MEM window: %08lx-%08lx\n",
@@ -199,8 +200,8 @@ pci_setup_bridge(struct pci_bus *bus)
 	pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
 
 	/* Set up PREF base/limit. */
-	pcibios_resource_to_bus(bridge, &region, bus->resource[2]);
-	if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
+	pcibios_resource_to_bus(bridge, &region, &b_res[2]);
+	if (b_res[2].flags & IORESOURCE_PREFETCH) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
 		DBG(KERN_INFO "  PREFETCH window: %08lx-%08lx\n",
@@ -270,6 +271,8 @@ find_free_bus_resource(struct pci_bus *b
 
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		r = bus->resource[i];
+		if (r == &ioport_resource || r == &iomem_resource)
+			continue;
 		if (r && (r->flags & type_mask) == type && !r->parent)
 			return r;
 	}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/