Re: USB mice do not work on 2.6.12-rc5-git9, -rc5-mm1, -rc5-mm2

[Sid Boyce <sboyce@blueyonder.co.uk>]

Sid Boyce wrote:
> Dmitry Torokhov wrote:
>
> > On Sunday 05 June 2005 02:10, Andrew Morton wrote:
> >
> > > Zoltan Boszormenyi <zboszor@freemail.hu> wrote:
> > >
> > > > Zoltan Boszormenyi írta:
> > > >
> > > > > Hi,
> > > > >
> > > > > $SUBJECT says almost all, system is MSI K8TNeo FIS2R,
> > > > > Athlon64 3200+, running FC3/x86-64. I use the multiconsole
> > > > > extension from linuxconsole.sf.net, the patch does not touch
> > > > > anything relevant under drivers/input or drivers/usb.
> > > > >
> > > > > The mice are detected just fine but the mouse pointers
> > > > > do not move on either of my two screens. The same patch
> > > > > (not counting the trivial reject fixes) do work on the
> > > > > 2.6.11-1.14_FC3 errata kernel. Both PS2 keyboard on the
> > > > > keyboard and aux ports work correctly.
> > > >
> > > >
> > > > The same patch also works on 2.6.12-rc4-mm2, with working mice.
> > > > It seems the bug is mainstream.
> > >
> > > Please test an unpatched kernel.
> >
> >
> >
> > I think it is the same problem as Sid is seeing on his box.
> >
> >
> > > I attached dmesg and the contents of /proc/interrupts.
> > > The interrupt count on USB does not increase if I move either
> > > mouse.
> >
> >
> > Sid, if you move mouse on your box, do you see interrupts reported
> > in /proc/interrupts? Do you also have x86-64?
>
> 2.6.12-rc5-git9 on both x86 and x86_64. On the x86 I have as follows:-
> 177:     178576   IO-APIC-level  ohci_hcd:usb3, eth0
> 185:         64   IO-APIC-level  eth1
> 193:          5   IO-APIC-level  ehci_hcd:usb1, ohci1394
> 201:        961   IO-APIC-level  ohci_hcd:usb2, NVidia nForce2
> The interrupts are increasing, but they come from eth0 only, usb3 and 
> eth0 share the same interrupt.
>
> On the x86_64, all joystick controls and buttons are functional
> 193:     107220   IO-APIC-level  ehci_hcd:usb1, uhci_hcd:usb2, 
> uhci_hcd:usb3, uhci_hcd:usb4
> 201:      20940   IO-APIC-level  eth0
>
> Possible problem with interrupt routing on the x86 box?. I shall try 
> "pci=routeirq" next boot.
> Regards
> Sid.

pci=routeirq didn't fix the problem. Device 007 probably causing the 
interrupts - USB IDE HD.
185:       9675   IO-APIC-level  ohci_hcd:usb2, ohci1394, eth0
193:       8141   IO-APIC-level  ohci_hcd:usb3
201:       1032   IO-APIC-level  ehci_hcd:usb1, NVidia nForce2

Bus 003 Device 008: ID 04b8:0103 Seiko Epson Corp. Perfection 610
Bus 003 Device 007: ID 067b:3507 Prolific Technology, Inc.
Bus 003 Device 006: ID 068e:00f2 CH Products, Inc. Flight Sim Pedals
Bus 003 Device 005: ID 05e3:0760 Genesys Logic, Inc. Card Reader
Bus 003 Device 004: ID 03f0:0604 Hewlett-Packard DeskJet 840c
Bus 003 Device 003: ID 068e:00ff CH Products, Inc. Flight Sim Yoke
Bus 003 Device 002: ID 0451:2077 Texas Instruments, Inc. TUSB2077 Hub
Bus 003 Device 001: ID 0000:0000

barrabas:/home/lancelot # jscal /dev/js0
Joystick has 7 axes and 12 buttons.
Correction for axis 0 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 1 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 2 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 3 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 4 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 5 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912
Correction for axis 6 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912

barrabas:/home/lancelot # jscal /dev/js1
Joystick has 3 axes and 0 buttons.
Correction for axis 0 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 1 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751
Correction for axis 2 is broken line, precision is 0.
Coeficients are: 127, 127, 5534751, 5534751

Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot
Retired IBM Mainframes and Sun Servers Tech Support Specialist
Microsoft Windows Free Zone - Linux used for all Computing Tasks
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/