Re: [PATCH] Creative WebCam mini driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for the comments Alexey. 

The whitespaces came from the diff. I the only switch what I have used it -u.

About the VENDOR_ID and PRODUCT_ID, I have looked at the code of
stv680.c that was in 2.6.11.11 and there the variables were casted.
> @@ -1375,9 +1383,14 @@
>           (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) {
Probably this code needs to be fixed as well.

And about the extra lines and bad formating of else clause I'll do
better next time.

Do I need to submit fixed patch or you have applied this one?

//Cyrilo

On 6/2/05, Alexey Dobriyan <[email protected]> wrote:
> On Thursday 02 June 2005 19:35, Kiril Jovchev wrote:
> 
> > So now I'm sending the patch again for 2.6.11.11 kernel what is latest stable.
> 
> You're lucky it applies cleanly against 2.6.12-rc5-whatever. ;-)
> 
> There is no need to split the patch into two ones. Next time CC
> [email protected]. Add "-p" to your diff switches.
> 
> > --- linux-2.6.11.11/drivers/usb/media/stv680.c
> > +++ linux/drivers/usb/media/stv680.c
> 
> > + * Creative WebCam Go Mini Driver, modified by Kiril Jovchev
> 
> Trailing whitespace.
> 
> > + *
> > + * ver 0.26 Sep, 2004 (kjv)
> > + *                      Added support for Creative WebCam Go mini.
> > + *                      Camera is based on same chip.
> > + *
> 
> Trailing whitespace.
> 
> > @@ -1375,9 +1383,14 @@
> >           (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) {
> >               camera_name = "STV0680";
> >               PDEBUG (0, "STV(i): STV0680 camera found.");
> > -     } else {
> > -             PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 values.");
> > -             PDEBUG (0, "STV(e): Check that the STV0680 camera is connected to the computer.");
> > +     } else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) &&
> > +            (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) {
> 
> VENDOR_ID and PRODUCT_ID are constants. You can do
> 
>         if ((dev->descriptor.idVendor == cpu_to_le16(VENDOR_ID)) &&
>             (dev->descriptor.idProduct == cpu_to_le16(PRODUCT_ID))) {
> 
> > +                camera_name = "Creative WebCam Go Mini";
> > +                PDEBUG (0, "STV(i): Creative WebCam Go Mini found.");
> > +     }
> > +     else {
> 
> "} else {", please.
> 
> > +             PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values.");
> > +             PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer.");
> 
> > --- linux-2.6.11.11/drivers/usb/media/stv680.h
> > +++ linux/drivers/usb/media/stv680.h
> 
> > +#define USB_CREATIVEGOMINI_VENDOR_ID 0x041e
> 
> Trailing whitespace.
> 
> >  static struct usb_device_id device_table[] = {
> >       {USB_DEVICE (USB_PENCAM_VENDOR_ID, USB_PENCAM_PRODUCT_ID)},
> > +     {USB_DEVICE (USB_CREATIVEGOMINI_VENDOR_ID, USB_CREATIVEGOMINI_PRODUCT_ID)},
> >       {}
> > +
> 
> Why add this line?
> 
> >  };
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux