Adds RapidIO enumeration/discovery.
The core code implements enumeration/discovery, management of
devices/resources, and interfaces for RIO drivers.
Signed-off-by: Matt Porter <[email protected]>
Index: drivers/rio/rio-scan.c
===================================================================
--- /dev/null (tree:8d5a02e2174e1dad478b22653de9f2a346e1c996)
+++ b4a27e4c90f11413fa6828321141c43cb9ad6c12/drivers/rio/rio-scan.c (mode:100644)
@@ -0,0 +1,960 @@
+/*
+ * RapidIO enumeration and discovery support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_regs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+
+#include "rio.h"
+
+LIST_HEAD(rio_devices);
+static LIST_HEAD(rio_switches);
+
+#define RIO_ENUM_CMPL_MAGIC 0xdeadbeef
+
+static void rio_enum_timeout(unsigned long);
+
+spinlock_t rio_global_list_lock = SPIN_LOCK_UNLOCKED;
+static int next_destid = 0;
+static int next_switchid = 0;
+static int next_net = 0;
+
+static struct timer_list rio_enum_timer =
+TIMER_INITIALIZER(rio_enum_timeout, 0, 0);
+
+static int rio_mport_phys_table[] = {
+ RIO_EFB_PAR_EP_ID,
+ RIO_EFB_PAR_EP_REC_ID,
+ RIO_EFB_SER_EP_ID,
+ RIO_EFB_SER_EP_REC_ID,
+ -1,
+};
+
+static int rio_sport_phys_table[] = {
+ RIO_EFB_PAR_EP_FREE_ID,
+ RIO_EFB_SER_EP_FREE_ID,
+ -1,
+};
+
+extern struct rio_route_ops __start_rio_route_ops[];
+extern struct rio_route_ops __end_rio_route_ops[];
+
+/**
+ * rio_get_device_id - Get the base/extended device id for a device
+ * @port: RIO master port
+ * @destid: Destination ID of device
+ * @hopcount: Hopcount to device
+ *
+ * Reads the base/extended device id from a device. Returns the
+ * 8/16-bit device ID.
+ */
+static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
+{
+ u32 result;
+
+ rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
+
+ return RIO_GET_DID(result);
+}
+
+/**
+ * rio_set_device_id - Set the base/extended device id for a device
+ * @port: RIO master port
+ * @destid: Destination ID of device
+ * @hopcount: Hopcount to device
+ * @did: Device ID value to be written
+ *
+ * Writes the base/extended device id from a device.
+ */
+static void
+rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
+{
+ rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
+ RIO_SET_DID(did));
+}
+
+/**
+ * rio_local_set_device_id - Set the base/extended device id for a port
+ * @port: RIO master port
+ * @did: Device ID value to be written
+ *
+ * Writes the base/extended device id from a device.
+ */
+static void rio_local_set_device_id(struct rio_mport *port, u16 did)
+{
+ rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(did));
+}
+
+/**
+ * rio_clear_locks- Release all host locks and signal enumeration complete
+ * @port: Master port to issue transaction
+ *
+ * Marks the component tag CSR on each device with the enumeration
+ * complete flag. When complete, it then release the host locks on
+ * each device. Returns 0 on success or %-EINVAL on failure.
+ */
+static int rio_clear_locks(struct rio_mport *port)
+{
+ struct rio_dev *rdev;
+ u32 result;
+ int ret = 0;
+
+ /* Write component tag CSR magic complete value */
+ rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR,
+ RIO_ENUM_CMPL_MAGIC);
+ list_for_each_entry(rdev, &rio_devices, global_list)
+ rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR,
+ RIO_ENUM_CMPL_MAGIC);
+
+ /* Release host device id locks */
+ rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != 0xffff) {
+ printk(KERN_INFO
+ "RIO: badness when releasing host lock on master port, result %8.8x\n",
+ result);
+ ret = -EINVAL;
+ }
+ list_for_each_entry(rdev, &rio_devices, global_list) {
+ rio_write_config_32(rdev, RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_read_config_32(rdev, RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != 0xffff) {
+ printk(KERN_INFO
+ "RIO: badness when releasing host lock on vid %4.4x did %4.4x\n",
+ rdev->vid, rdev->did);
+ ret = -EINVAL;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * rio_enum_host- Set host lock and initialize host destination ID
+ * @port: Master port to issue transaction
+ *
+ * Sets the local host master port lock and destination ID register
+ * with the host device ID value. The host device ID value is provided
+ * by the platform. Returns %0 on success or %-1 on failure.
+ */
+static int rio_enum_host(struct rio_mport *port)
+{
+ u32 result;
+
+ /* Set master port host device id lock */
+ rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+
+ rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != port->host_deviceid)
+ return -1;
+
+ /* Set master port destid and init destid ctr */
+ rio_local_set_device_id(port, port->host_deviceid);
+
+ if (next_destid == port->host_deviceid)
+ next_destid++;
+
+ return 0;
+}
+
+/**
+ * rio_device_has_destid- Test if a device contains a destination ID register
+ * @port: Master port to issue transaction
+ * @src_ops: RIO device source operations
+ * @dst_ops: RIO device destination operations
+ *
+ * Checks the provided @src_ops and @dst_ops for the necessary transaction
+ * capabilities that indicate whether or not a device will implement a
+ * destination ID register. Returns 1 if true or 0 if false.
+ */
+static int rio_device_has_destid(struct rio_mport *port, int src_ops,
+ int dst_ops)
+{
+ if (((src_ops & RIO_SRC_OPS_READ) ||
+ (src_ops & RIO_SRC_OPS_WRITE) ||
+ (src_ops & RIO_SRC_OPS_ATOMIC_TST_SWP) ||
+ (src_ops & RIO_SRC_OPS_ATOMIC_INC) ||
+ (src_ops & RIO_SRC_OPS_ATOMIC_DEC) ||
+ (src_ops & RIO_SRC_OPS_ATOMIC_SET) ||
+ (src_ops & RIO_SRC_OPS_ATOMIC_CLR)) &&
+ ((dst_ops & RIO_DST_OPS_READ) ||
+ (dst_ops & RIO_DST_OPS_WRITE) ||
+ (dst_ops & RIO_DST_OPS_ATOMIC_TST_SWP) ||
+ (dst_ops & RIO_DST_OPS_ATOMIC_INC) ||
+ (dst_ops & RIO_DST_OPS_ATOMIC_DEC) ||
+ (dst_ops & RIO_DST_OPS_ATOMIC_SET) ||
+ (dst_ops & RIO_DST_OPS_ATOMIC_CLR))) {
+ return 1;
+ } else
+ return 0;
+}
+
+/**
+ * rio_release_dev- Frees a RIO device struct
+ * @dev: LDM device associated with a RIO device struct
+ *
+ * Gets the RIO device struct associated a RIO device struct.
+ * The RIO device struct is freed.
+ */
+static void rio_release_dev(struct device *dev)
+{
+ struct rio_dev *rdev;
+
+ rdev = to_rio_dev(dev);
+ kfree(rdev);
+}
+
+/**
+ * rio_is_switch- Tests if a RIO device has switch capabilities
+ * @rdev: RIO device
+ *
+ * Gets the RIO device Processing Element Features register
+ * contents and tests for switch capabilities. Returns 1 if
+ * the device is a switch or 0 if it is not a switch.
+ * The RIO device struct is freed.
+ */
+static int rio_is_switch(struct rio_dev *rdev)
+{
+ if (rdev->pef & RIO_PEF_SWITCH)
+ return 1;
+ return 0;
+}
+
+/**
+ * rio_route_set_ops- Sets routing operations for a particular vendor switch
+ * @rdev: RIO device
+ *
+ * Searches the RIO route ops table for known switch types. If the vid
+ * and did match a switch table entry, then set the add_entry() and
+ * get_entry() ops to the table entry values.
+ */
+static void rio_route_set_ops(struct rio_dev *rdev)
+{
+ struct rio_route_ops *cur = __start_rio_route_ops;
+ struct rio_route_ops *end = __end_rio_route_ops;
+
+ while (cur < end) {
+ if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
+ pr_debug("RIO: adding routing ops for %s\n", rio_name(rdev));
+ rdev->rswitch->add_entry = cur->add_hook;
+ rdev->rswitch->get_entry = cur->get_hook;
+ }
+ cur++;
+ }
+
+ if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
+ printk(KERN_ERR "RIO: missing routing ops for %s\n",
+ rio_name(rdev));
+}
+
+/**
+ * rio_add_device- Adds a RIO device to the device model
+ * @rdev: RIO device
+ *
+ * Adds the RIO device to the global device list and adds the RIO
+ * device to the RIO device list. Creates the generic sysfs nodes
+ * for an RIO device.
+ */
+static void __devinit rio_add_device(struct rio_dev *rdev)
+{
+ device_add(&rdev->dev);
+
+ spin_lock(&rio_global_list_lock);
+ list_add_tail(&rdev->global_list, &rio_devices);
+ spin_unlock(&rio_global_list_lock);
+
+ rio_create_sysfs_dev_files(rdev);
+}
+
+/**
+ * rio_setup_device- Allocates and sets up a RIO device
+ * @net: RIO network
+ * @port: Master port to send transactions
+ * @destid: Current destination ID
+ * @hopcount: Current hopcount
+ * @do_enum: Enumeration/Discovery mode flag
+ *
+ * Allocates a RIO device and configures fields based on configuration
+ * space contents. If device has a destination ID register, a destination
+ * ID is either assigned in enumeration mode or read from configuration
+ * space in discovery mode. If the device has switch capabilities, then
+ * a switch is allocated and configured appropriately. Returns a pointer
+ * to a RIO device on success or NULL on failure.
+ *
+ */
+static struct rio_dev *rio_setup_device(struct rio_net *net,
+ struct rio_mport *port, u16 destid,
+ u8 hopcount, int do_enum)
+{
+ struct rio_dev *rdev;
+ struct rio_switch *rswitch;
+ int result, rdid;
+
+ rdev = kmalloc(sizeof(struct rio_dev), GFP_KERNEL);
+ if (!rdev)
+ goto out;
+
+ memset(rdev, 0, sizeof(struct rio_dev));
+ rdev->net = net;
+ rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR,
+ &result);
+ rdev->did = result >> 16;
+ rdev->vid = result & 0xffff;
+ rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_INFO_CAR,
+ &rdev->device_rev);
+ rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_ID_CAR,
+ &result);
+ rdev->asm_did = result >> 16;
+ rdev->asm_vid = result & 0xffff;
+ rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_INFO_CAR,
+ &result);
+ rdev->asm_rev = result >> 16;
+ rio_mport_read_config_32(port, destid, hopcount, RIO_PEF_CAR,
+ &rdev->pef);
+ if (rdev->pef & RIO_PEF_EXT_FEATURES)
+ rdev->efptr = result & 0xffff;
+
+ rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
+ &rdev->src_ops);
+ rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
+ &rdev->dst_ops);
+
+ if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)
+ && do_enum) {
+ rio_set_device_id(port, destid, hopcount, next_destid);
+ rdev->destid = next_destid++;
+ if (next_destid == port->host_deviceid)
+ next_destid++;
+ } else
+ rdev->destid = rio_get_device_id(port, destid, hopcount);
+
+ /* If a PE has both switch and other functions, show it as a switch */
+ if (rio_is_switch(rdev)) {
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_SWP_INFO_CAR, &rdev->swpinfo);
+ rswitch = kmalloc(sizeof(struct rio_switch), GFP_KERNEL);
+ if (!rswitch) {
+ kfree(rdev);
+ rdev = NULL;
+ goto out;
+ }
+ rswitch->switchid = next_switchid;
+ rswitch->hopcount = hopcount;
+ rswitch->destid = 0xffff;
+ /* Initialize switch route table */
+ for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES; rdid++)
+ rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
+ rdev->rswitch = rswitch;
+ sprintf(rio_name(rdev), "%02x:s:%04x", rdev->net->id,
+ rdev->rswitch->switchid);
+ rio_route_set_ops(rdev);
+
+ list_add_tail(&rswitch->node, &rio_switches);
+
+ } else
+ sprintf(rio_name(rdev), "%02x:e:%04x", rdev->net->id,
+ rdev->destid);
+
+ rdev->dev.bus = &rio_bus_type;
+
+ device_initialize(&rdev->dev);
+ rdev->dev.release = rio_release_dev;
+ rio_dev_get(rdev);
+
+ rdev->dev.dma_mask = (u64 *) 0xffffffff;
+ rdev->dev.coherent_dma_mask = 0xffffffffULL;
+
+ if ((rdev->pef & RIO_PEF_INB_DOORBELL) &&
+ (rdev->dst_ops & RIO_DST_OPS_DOORBELL))
+ rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
+ 0, 0xffff);
+
+ rio_add_device(rdev);
+
+ out:
+ return rdev;
+}
+
+/**
+ * rio_sport_is_active- Tests if a switch port has an active connection.
+ * @port: Master port to send transaction
+ * @destid: Associated destination ID for switch
+ * @hopcount: Hopcount to reach switch
+ * @sport: Switch port number
+ *
+ * Reads the port error status CSR for a particular switch port to
+ * determine if the port has an active link. Returns
+ * %PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
+ * inactive.
+ */
+static int
+rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
+{
+ u32 result;
+ u32 ext_ftr_ptr;
+
+ int *entry = rio_sport_phys_table;
+
+ do {
+ if ((ext_ftr_ptr =
+ rio_mport_get_feature(port, 0, destid, hopcount, *entry)))
+
+ break;
+ } while (*++entry >= 0);
+
+ if (ext_ftr_ptr)
+ rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr +
+ RIO_PORT_N_ERR_STS_CSR(sport),
+ &result);
+
+ return (result & PORT_N_ERR_STS_PORT_OK);
+}
+
+/**
+ * rio_route_add_entry- Add a route entry to a switch routing table
+ * @mport: Master port to send transaction
+ * @rdev: Switch device
+ * @table: Routing table ID
+ * @route_destid: Destination ID to be routed
+ * @route_port: Port number to be routed
+ *
+ * Calls the switch specific add_entry() method to add a route entry
+ * on a switch. The route table can be specified using the @table
+ * argument if a switch has per port routing tables or the normal
+ * use is to specific all tables (or the global table) by passing
+ * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL
+ * on failure.
+ */
+static int rio_route_add_entry(struct rio_mport *mport, struct rio_dev *rdev,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ return rdev->rswitch->add_entry(mport, rdev->rswitch->destid,
+ rdev->rswitch->hopcount, table,
+ route_destid, route_port);
+}
+
+/**
+ * rio_route_get_entry- Read a route entry in a switch routing table
+ * @mport: Master port to send transaction
+ * @rdev: Switch device
+ * @table: Routing table ID
+ * @route_destid: Destination ID to be routed
+ * @route_port: Pointer to read port number into
+ *
+ * Calls the switch specific get_entry() method to read a route entry
+ * in a switch. The route table can be specified using the @table
+ * argument if a switch has per port routing tables or the normal
+ * use is to specific all tables (or the global table) by passing
+ * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL
+ * on failure.
+ */
+static int
+rio_route_get_entry(struct rio_mport *mport, struct rio_dev *rdev, u16 table,
+ u16 route_destid, u8 * route_port)
+{
+ return rdev->rswitch->get_entry(mport, rdev->rswitch->destid,
+ rdev->rswitch->hopcount, table,
+ route_destid, route_port);
+}
+
+/**
+ * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device
+ * @port: Master port to send transaction
+ * @hopcount: Number of hops to the device
+ *
+ * Used during enumeration to read the Host Device ID Lock CSR on a
+ * RIO device. Returns the value of the lock register.
+ */
+static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
+{
+ u32 result;
+
+ rio_mport_read_config_32(port, RIO_ANY_DESTID, hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+
+ return (u16) (result & 0xffff);
+}
+
+/**
+ * rio_get_swpinfo_inport- Gets the ingress port number
+ * @mport: Master port to send transaction
+ * @destid: Destination ID associated with the switch
+ * @hopcount: Number of hops to the device
+ *
+ * Returns port number being used to access the switch device.
+ */
+static u8
+rio_get_swpinfo_inport(struct rio_mport *mport, u16 destid, u8 hopcount)
+{
+ u32 result;
+
+ rio_mport_read_config_32(mport, destid, hopcount, RIO_SWP_INFO_CAR,
+ &result);
+
+ return (u8) (result & 0xff);
+}
+
+/**
+ * rio_get_swpinfo_tports- Gets total number of ports on the switch
+ * @mport: Master port to send transaction
+ * @destid: Destination ID associated with the switch
+ * @hopcount: Number of hops to the device
+ *
+ * Returns total numbers of ports implemented by the switch device.
+ */
+static u8 rio_get_swpinfo_tports(struct rio_mport *mport, u16 destid,
+ u8 hopcount)
+{
+ u32 result;
+
+ rio_mport_read_config_32(mport, destid, hopcount, RIO_SWP_INFO_CAR,
+ &result);
+
+ return RIO_GET_TOTAL_PORTS(result);
+}
+
+/**
+ * rio_net_add_mport- Add a master port to a RIO network
+ * @net: RIO network
+ * @port: Master port to add
+ *
+ * Adds a master port to the network list of associated master
+ * ports..
+ */
+static void rio_net_add_mport(struct rio_net *net, struct rio_mport *port)
+{
+ spin_lock(&rio_global_list_lock);
+ list_add_tail(&port->nnode, &net->mports);
+ spin_unlock(&rio_global_list_lock);
+}
+
+/**
+ * rio_enum_peer- Recursively enumerate a RIO network through a master port
+ * @net: RIO network being enumerated
+ * @port: Master port to send transactions
+ * @hopcount: Number of hops into the network
+ *
+ * Recursively enumerates a RIO network. Transactions are sent via the
+ * master port passed in @port.
+ */
+static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
+ u8 hopcount)
+{
+ int port_num;
+ int num_ports;
+ int cur_destid;
+ struct rio_dev *rdev;
+ u16 destid;
+ int tmp;
+
+ if (rio_get_host_deviceid_lock(port, hopcount) == port->host_deviceid) {
+ pr_debug("RIO: PE already discovered by this host\n");
+ /*
+ * Already discovered by this host. Add it as another
+ * master port for the current network.
+ */
+ rio_net_add_mport(net, port);
+ return 0;
+ }
+
+ /* Attempt to acquire device lock */
+ rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+ RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
+ while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
+ < port->host_deviceid) {
+ /* Delay a bit */
+ mdelay(1);
+ /* Attempt to acquire device lock again */
+ rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+ RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ }
+
+ if (rio_get_host_deviceid_lock(port, hopcount) > port->host_deviceid) {
+ pr_debug(
+ "RIO: PE locked by a higher priority host...retreating\n");
+ return -1;
+ }
+
+ /* Setup new RIO device */
+ if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID, hopcount, 1))) {
+ /* Add device to the global and bus/net specific list. */
+ list_add_tail(&rdev->net_list, &net->devices);
+ } else
+ return -1;
+
+ if (rio_is_switch(rdev)) {
+ next_switchid++;
+
+ for (destid = 0; destid < next_destid; destid++) {
+ rio_route_add_entry(port, rdev, RIO_GLOBAL_TABLE,
+ destid, rio_get_swpinfo_inport(port,
+ RIO_ANY_DESTID,
+ hopcount));
+ rdev->rswitch->route_table[destid] =
+ rio_get_swpinfo_inport(port, RIO_ANY_DESTID,
+ hopcount);
+ }
+
+ num_ports =
+ rio_get_swpinfo_tports(port, RIO_ANY_DESTID, hopcount);
+ pr_debug(
+ "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
+ rio_name(rdev), rdev->vid, rdev->did, num_ports);
+ for (port_num = 0; port_num < num_ports; port_num++) {
+ if (rio_get_swpinfo_inport
+ (port, RIO_ANY_DESTID, hopcount) == port_num)
+ continue;
+
+ cur_destid = next_destid;
+
+ if (rio_sport_is_active
+ (port, RIO_ANY_DESTID, hopcount, port_num)) {
+ pr_debug(
+ "RIO: scanning device on port %d\n",
+ port_num);
+ rio_route_add_entry(port, rdev,
+ RIO_GLOBAL_TABLE,
+ RIO_ANY_DESTID, port_num);
+
+ if (rio_enum_peer(net, port, hopcount + 1) < 0)
+ return -1;
+
+ /* Update routing tables */
+ if (next_destid > cur_destid) {
+ for (destid = cur_destid;
+ destid < next_destid; destid++) {
+ rio_route_add_entry(port, rdev,
+ RIO_GLOBAL_TABLE,
+ destid,
+ port_num);
+ rdev->rswitch->
+ route_table[destid] =
+ port_num;
+ }
+ rdev->rswitch->destid = cur_destid;
+ }
+ }
+ }
+ } else
+ pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
+ rio_name(rdev), rdev->vid, rdev->did);
+
+ return 0;
+}
+
+/**
+ * rio_enum_complete- Tests if enumeration of a network is complete
+ * @port: Master port to send transaction
+ *
+ * Tests the Component Tag CSR for presence of the magic enumeration
+ * complete flag. Return %1 if enumeration is complete or %0 if
+ * enumeration is incomplete.
+ */
+static int rio_enum_complete(struct rio_mport *port)
+{
+ u32 tag_csr;
+ int ret = 0;
+
+ rio_local_read_config_32(port, RIO_COMPONENT_TAG_CSR, &tag_csr);
+
+ if (tag_csr == RIO_ENUM_CMPL_MAGIC)
+ ret = 1;
+
+ return ret;
+}
+
+/**
+ * rio_disc_peer- Recursively discovers a RIO network through a master port
+ * @net: RIO network being discovered
+ * @port: Master port to send transactions
+ * @destid: Current destination ID in network
+ * @hopcount: Number of hops into the network
+ *
+ * Recursively discovers a RIO network. Transactions are sent via the
+ * master port passed in @port.
+ */
+static int
+rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
+ u8 hopcount)
+{
+ u8 port_num, route_port;
+ int num_ports;
+ struct rio_dev *rdev;
+ u16 ndestid;
+
+ /* Setup new RIO device */
+ if ((rdev = rio_setup_device(net, port, destid, hopcount, 0))) {
+ /* Add device to the global and bus/net specific list. */
+ list_add_tail(&rdev->net_list, &net->devices);
+ } else
+ return -1;
+
+ if (rio_is_switch(rdev)) {
+ next_switchid++;
+
+ /* Associated destid is how we accessed this switch */
+ rdev->rswitch->destid = destid;
+
+ num_ports = rio_get_swpinfo_tports(port, destid, hopcount);
+ pr_debug(
+ "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
+ rio_name(rdev), rdev->vid, rdev->did, num_ports);
+ for (port_num = 0; port_num < num_ports; port_num++) {
+ if (rio_get_swpinfo_inport(port, destid, hopcount) ==
+ port_num)
+ continue;
+
+ if (rio_sport_is_active
+ (port, destid, hopcount, port_num)) {
+ pr_debug(
+ "RIO: scanning device on port %d\n",
+ port_num);
+ for (ndestid = 0; ndestid < RIO_ANY_DESTID;
+ ndestid++) {
+ rio_route_get_entry(port, rdev,
+ RIO_GLOBAL_TABLE,
+ ndestid,
+ &route_port);
+ if (route_port == port_num)
+ break;
+ }
+
+ if (rio_disc_peer
+ (net, port, ndestid, hopcount + 1) < 0)
+ return -1;
+ }
+ }
+ } else
+ pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
+ rio_name(rdev), rdev->vid, rdev->did);
+
+ return 0;
+}
+
+/**
+ * rio_mport_is_active- Tests if master port link is active
+ * @port: Master port to test
+ *
+ * Reads the port error status CSR for the master port to
+ * determine if the port has an active link. Returns
+ * %PORT_N_ERR_STS_PORT_OK if the master port is active
+ * or %0 if it is inactive.
+ */
+static int rio_mport_is_active(struct rio_mport *port)
+{
+ u32 result = 0;
+ u32 ext_ftr_ptr;
+ int *entry = rio_mport_phys_table;
+
+ do {
+ if ((ext_ftr_ptr =
+ rio_mport_get_feature(port, 1, 0, 0, *entry)))
+ break;
+ } while (*++entry >= 0);
+
+ if (ext_ftr_ptr)
+ rio_local_read_config_32(port,
+ ext_ftr_ptr +
+ RIO_PORT_N_ERR_STS_CSR(port->index),
+ &result);
+
+ return (result & PORT_N_ERR_STS_PORT_OK);
+}
+
+/**
+ * rio_alloc_net- Allocate and configure a new RIO network
+ * @port: Master port associated with the RIO network
+ *
+ * Allocates a RIO network structure, initializes per-network
+ * list heads, and adds the associated master port to the
+ * network list of associated master ports. Returns a
+ * RIO network pointer on success or %NULL on failure.
+ */
+static struct rio_net __devinit *rio_alloc_net(struct rio_mport *port)
+{
+ struct rio_net *net;
+
+ net = kmalloc(sizeof(struct rio_net), GFP_KERNEL);
+ if (net) {
+ memset(net, 0, sizeof(struct rio_net));
+ INIT_LIST_HEAD(&net->node);
+ INIT_LIST_HEAD(&net->devices);
+ INIT_LIST_HEAD(&net->mports);
+ list_add_tail(&port->nnode, &net->mports);
+ net->hport = port;
+ net->id = next_net++;
+ }
+ return net;
+}
+
+/**
+ * rio_enum_mport- Start enumeration through a master port
+ * @mport: Master port to send transactions
+ *
+ * Starts the enumeration process. If somebody has enumerated our
+ * master port device, then give up. If not and we have an active
+ * link, then start recursive peer enumeration. Returns %0 if
+ * enumeration succeeds or %-EBUSY if enumeration fails.
+ */
+int rio_enum_mport(struct rio_mport *mport)
+{
+ struct rio_net *net = NULL;
+ int rc = 0;
+
+ printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
+ mport->name);
+ /* If somebody else enumerated our master port device, bail. */
+ if (rio_enum_host(mport) < 0) {
+ printk(KERN_INFO
+ "RIO: master port %d device has been enumerated by a remote host\n",
+ mport->id);
+ rc = -EBUSY;
+ goto out;
+ }
+
+ /* If master port has an active link, allocate net and enum peers */
+ if (rio_mport_is_active(mport)) {
+ if (!(net = rio_alloc_net(mport))) {
+ printk(KERN_ERR "RIO: failed to allocate new net\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+ if (rio_enum_peer(net, mport, 0) < 0) {
+ /* A higher priority host won enumeration, bail. */
+ printk(KERN_INFO
+ "RIO: master port %d device has lost enumeration to a remote host\n",
+ mport->id);
+ rio_clear_locks(mport);
+ rc = -EBUSY;
+ goto out;
+ }
+ rio_clear_locks(mport);
+ } else {
+ printk(KERN_INFO "RIO: master port %d link inactive\n",
+ mport->id);
+ rc = -EINVAL;
+ }
+
+ out:
+ return rc;
+}
+
+/**
+ * rio_build_route_tables- Generate route tables from switch route entries
+ *
+ * For each switch device, generate a route table by copying existing
+ * route entries from the switch.
+ */
+static void rio_build_route_tables(void)
+{
+ struct rio_dev *rdev;
+ int i;
+ u8 sport;
+
+ list_for_each_entry(rdev, &rio_devices, global_list)
+ if (rio_is_switch(rdev))
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+ if (rio_route_get_entry
+ (rdev->net->hport, rdev, RIO_GLOBAL_TABLE, i,
+ &sport) < 0)
+ continue;
+ rdev->rswitch->route_table[i] = sport;
+ }
+}
+
+/**
+ * rio_enum_timeout- Signal that enumeration timed out
+ * @data: Address of timeout flag.
+ *
+ * When the enumeration complete timer expires, set a flag that
+ * signals to the discovery process that enumeration did not
+ * complete in a sane amount of time.
+ */
+static void rio_enum_timeout(unsigned long data)
+{
+ /* Enumeration timed out, set flag */
+ *(int *)data = 1;
+}
+
+/**
+ * rio_disc_mport- Start discovery through a master port
+ * @mport: Master port to send transactions
+ *
+ * Starts the discovery process. If we have an active link,
+ * then wait for the signal that enumeration is complete.
+ * When enumeration completion is signaled, start recursive
+ * peer discovery. Returns %0 if discovery succeeds or %-EBUSY
+ * on failure.
+ */
+int rio_disc_mport(struct rio_mport *mport)
+{
+ struct rio_net *net = NULL;
+ int enum_timeout_flag = 0;
+
+ printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id,
+ mport->name);
+
+ /* If master port has an active link, allocate net and discover peers */
+ if (rio_mport_is_active(mport)) {
+ if (!(net = rio_alloc_net(mport))) {
+ printk(KERN_ERR "RIO: Failed to allocate new net\n");
+ goto bail;
+ }
+
+ pr_debug("RIO: wait for enumeration complete...");
+
+ rio_enum_timer.expires =
+ jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
+ rio_enum_timer.data = (unsigned long)&enum_timeout_flag;
+ add_timer(&rio_enum_timer);
+ while (!rio_enum_complete(mport)) {
+ mdelay(1);
+ if (enum_timeout_flag) {
+ del_timer_sync(&rio_enum_timer);
+ goto timeout;
+ }
+ }
+ del_timer_sync(&rio_enum_timer);
+
+ pr_debug("done\n");
+ if (rio_disc_peer(net, mport, RIO_ANY_DESTID, 0) < 0) {
+ printk(KERN_INFO
+ "RIO: master port %d device has failed discovery\n",
+ mport->id);
+ goto bail;
+ }
+
+ rio_build_route_tables();
+ }
+
+ return 0;
+
+ timeout:
+ pr_debug("timeout\n");
+ bail:
+ return -EBUSY;
+}
Index: drivers/rio/switches/Makefile
===================================================================
--- /dev/null (tree:8d5a02e2174e1dad478b22653de9f2a346e1c996)
+++ b4a27e4c90f11413fa6828321141c43cb9ad6c12/drivers/rio/switches/Makefile (mode:100644)
@@ -0,0 +1,5 @@
+#
+# Makefile for RIO switches
+#
+
+obj-$(CONFIG_RAPIDIO) += tsi500.o
Index: drivers/rio/switches/tsi500.c
===================================================================
--- /dev/null (tree:8d5a02e2174e1dad478b22653de9f2a346e1c996)
+++ b4a27e4c90f11413fa6828321141c43cb9ad6c12/drivers/rio/switches/tsi500.c (mode:100644)
@@ -0,0 +1,60 @@
+/*
+ * RapidIO Tsi500 switch support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include "../rio.h"
+
+static int
+tsi500_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port)
+{
+ int i;
+ u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3);
+ u32 result;
+
+ if (table == 0xff) {
+ rio_mport_read_config_32(mport, destid, hopcount, offset, &result);
+ result &= ~(0xf << (4*(route_destid & 0x7)));
+ for (i=0;i<4;i++)
+ rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*i), result | (route_port << (4*(route_destid & 0x7))));
+ }
+ else {
+ rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result);
+ result &= ~(0xf << (4*(route_destid & 0x7)));
+ rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*table), result | (route_port << (4*(route_destid & 0x7))));
+ }
+
+ return 0;
+}
+
+static int
+tsi500_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 *route_port)
+{
+ int ret = 0;
+ u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3);
+ u32 result;
+
+ if (table == 0xff)
+ rio_mport_read_config_32(mport, destid, hopcount, offset, &result);
+ else
+ rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result);
+
+ result &= 0xf << (4*(route_destid & 0x7));
+ *route_port = result >> (4*(route_destid & 0x7));
+ if (*route_port > 3)
+ ret = -1;
+
+ return ret;
+}
+
+DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_route_add_entry, tsi500_route_get_entry);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
