I had the same problem with rc4+47-07, rc5+47-10,47-13
I reproduce this problem with a tg3 driver and with e1000 driver.
So I think it's not a driver problem.
I try to copy an iso image from this machine to another one by scp.
after 35 to 45MB, the copy become stalled with no more transfert.
We can ping the target machine, all apparently is OK except the scp
which finish with timeout.
With ftp, the stalled state is about 100MB.
If I reboot with a standard kernel ( without RT ), no problem.
Perhaps there is a progress, in 47-15, the size is now 135-140MB
On this machine, we have an ide disk.
I have setup : hdparm
-sh-2.05b# hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 3 (32-bit w/sync)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 78165360, start = 0
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
