Turn pm_message_t into struct, so that it is typechecked properly (and
so that we can add flags field in future). This should not go in
before 2.6.12.
Note: this rejects against -mm tree. Some rejects are caused by
state_store getting more arguments, and some by added hook
in pci_choose_state. I still do not like that pci_choose_state
hook, it really should return pci_power_t, not int.
Signed-off-by: Pavel Machek <[email protected]>
---
commit a249072c4e0ef136c27c9e59d664e5be0d677ddc
tree 24a21ff5302734d40e08c400b14c0c1624cceded
parent f4bed68f59d9f32a4460288f40bb7f2af463babd
author <pavel@amd.(none)> Tue, 31 May 2005 11:57:50 +0200
committer <pavel@amd.(none)> Tue, 31 May 2005 11:57:50 +0200
drivers/base/power/resume.c | 8 ++++----
drivers/base/power/runtime.c | 8 ++++----
drivers/base/power/suspend.c | 12 ++++++------
drivers/base/power/sysfs.c | 8 ++++----
drivers/ide/ide.c | 4 ++--
drivers/pci/pci.c | 14 +++++++-------
drivers/serial/pmac_zilog.c | 2 +-
drivers/usb/core/hub.c | 18 +++++++++---------
drivers/usb/core/usb.c | 2 +-
drivers/usb/host/ehci-dbg.c | 2 +-
drivers/usb/host/ohci-dbg.c | 2 +-
drivers/usb/host/sl811-hcd.c | 6 +++---
drivers/video/aty/atyfb_base.c | 4 ++--
drivers/video/aty/radeon_pm.c | 12 ++++++------
drivers/video/i810/i810_main.c | 6 +++---
include/linux/pm.h | 14 ++++++++++----
16 files changed, 64 insertions(+), 58 deletions(-)
Index: drivers/base/power/resume.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/base/power/resume.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/base/power/resume.c (mode:100644)
@@ -23,11 +23,11 @@
int resume_device(struct device * dev)
{
if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state) {
+ && dev->power.pm_parent->power.power_state.event) {
dev_err(dev, "PM: resume from %d, parent %s still %d\n",
- dev->power.power_state,
+ dev->power.power_state.event,
dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state);
+ dev->power.pm_parent->power.power_state.event);
}
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
@@ -50,7 +50,7 @@
list_add_tail(entry, &dpm_active);
up(&dpm_list_sem);
- if (!dev->power.prev_state)
+ if (!dev->power.prev_state.event)
resume_device(dev);
down(&dpm_list_sem);
put_device(dev);
Index: drivers/base/power/runtime.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/base/power/runtime.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/base/power/runtime.c (mode:100644)
@@ -13,10 +13,10 @@
static void runtime_resume(struct device * dev)
{
dev_dbg(dev, "resuming\n");
- if (!dev->power.power_state)
+ if (!dev->power.power_state.event)
return;
if (!resume_device(dev))
- dev->power.power_state = 0;
+ dev->power.power_state = PMSG_ON;
}
@@ -49,10 +49,10 @@
int error = 0;
down(&dpm_sem);
- if (dev->power.power_state == state)
+ if (dev->power.power_state.event == state.event)
goto Done;
- if (dev->power.power_state)
+ if (dev->power.power_state.event)
runtime_resume(dev);
if (!(error = suspend_device(dev, state)))
Index: drivers/base/power/suspend.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/base/power/suspend.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/base/power/suspend.c (mode:100644)
@@ -39,22 +39,22 @@
{
int error = 0;
- if (dev->power.power_state) {
+ if (dev->power.power_state.event) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
- dev->power.power_state, state);
+ dev->power.power_state.event, state.event);
}
if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state) {
+ && dev->power.pm_parent->power.power_state.event) {
dev_err(dev,
"PM: suspend %d->%d, parent %s already %d\n",
- dev->power.power_state, state,
+ dev->power.power_state.event, state.event,
dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state);
+ dev->power.pm_parent->power.power_state.event);
}
dev->power.prev_state = dev->power.power_state;
- if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
+ if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
dev_dbg(dev, "suspending\n");
error = dev->bus->suspend(dev, state);
}
Index: drivers/base/power/sysfs.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/base/power/sysfs.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/base/power/sysfs.c (mode:100644)
@@ -26,19 +26,19 @@
static ssize_t state_show(struct device * dev, char * buf)
{
- return sprintf(buf, "%u\n", dev->power.power_state);
+ return sprintf(buf, "%u\n", dev->power.power_state.event);
}
static ssize_t state_store(struct device * dev, const char * buf, size_t n)
{
- u32 state;
+ pm_message_t state;
char * rest;
int error = 0;
- state = simple_strtoul(buf, &rest, 10);
+ state.event = simple_strtoul(buf, &rest, 10);
if (*rest)
return -EINVAL;
- if (state)
+ if (state.event)
error = dpm_runtime_suspend(dev, state);
else
dpm_runtime_resume(dev);
Index: drivers/ide/ide.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/ide/ide.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/ide/ide.c (mode:100644)
@@ -1385,7 +1385,7 @@
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
- rqpm.pm_state = state;
+ rqpm.pm_state = state.event;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
@@ -1404,7 +1404,7 @@
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
- rqpm.pm_state = 0;
+ rqpm.pm_state = PM_EVENT_ON;
return ide_do_drive_cmd(drive, &rq, ide_head_wait);
}
Index: drivers/pci/pci.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/pci/pci.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/pci/pci.c (mode:100644)
@@ -316,14 +316,14 @@
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
- if (!pci_find_capability(dev, PCI_CAP_ID_PM))
+ switch (state.event) {
+ case PM_EVENT_ON:
return PCI_D0;
-
- switch (state) {
- case 0: return PCI_D0;
- case 3: return PCI_D3hot;
- default:
- printk("They asked me for state %d\n", state);
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_SUSPEND:
+ return PCI_D3hot;
+ default:
+ printk("They asked me for state %d\n", state.event);
BUG();
}
return PCI_D0;
Index: drivers/serial/pmac_zilog.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/serial/pmac_zilog.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/serial/pmac_zilog.c (mode:100644)
@@ -1601,7 +1601,7 @@
return 0;
}
- if (pm_state == mdev->ofdev.dev.power.power_state || pm_state < 2)
+ if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
return 0;
pmz_debug("suspend, switching to state %d\n", pm_state);
Index: drivers/usb/core/hub.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/usb/core/hub.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/usb/core/hub.c (mode:100644)
@@ -1564,7 +1564,7 @@
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (state <= intf->dev.power.power_state)
+ if (state.event <= intf->dev.power.power_state.event)
continue;
if (!intf->dev.driver)
continue;
@@ -1572,11 +1572,11 @@
if (driver->suspend) {
status = driver->suspend(intf, state);
- if (intf->dev.power.power_state != state
+ if (intf->dev.power.power_state.event != state.event
|| status)
dev_err(&intf->dev,
"suspend %d fail, code %d\n",
- state, status);
+ state.event, status);
}
/* only drivers with suspend() can ever resume();
@@ -1589,7 +1589,7 @@
* since we know every driver's probe/disconnect works
* even for drivers that can't suspend.
*/
- if (!driver->suspend || state > PM_SUSPEND_MEM) {
+ if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
#if 1
dev_warn(&intf->dev, "resume is unsafe!\n");
#else
@@ -1610,7 +1610,7 @@
* policies (when HNP doesn't apply) once we have mechanisms to
* turn power back on! (Likely not before 2.7...)
*/
- if (state > PM_SUSPEND_MEM) {
+ if (state.event > PM_EVENT_FREEZE) {
dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
}
@@ -1727,7 +1727,7 @@
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (intf->dev.power.power_state == PMSG_SUSPEND)
+ if (intf->dev.power.power_state.event == PM_EVENT_ON)
continue;
if (!intf->dev.driver) {
/* FIXME maybe force to alt 0 */
@@ -1741,11 +1741,11 @@
/* can we do better than just logging errors? */
status = driver->resume(intf);
- if (intf->dev.power.power_state != PMSG_ON
+ if (intf->dev.power.power_state.event != PM_EVENT_ON
|| status)
dev_dbg(&intf->dev,
"resume fail, state %d code %d\n",
- intf->dev.power.power_state, status);
+ intf->dev.power.power_state.event, status);
}
status = 0;
@@ -1928,7 +1928,7 @@
unsigned port1;
int status;
- if (intf->dev.power.power_state == PM_SUSPEND_ON)
+ if (intf->dev.power.power_state.event == PM_EVENT_ON)
return 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
Index: drivers/usb/core/usb.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/usb/core/usb.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/usb/core/usb.c (mode:100644)
@@ -1389,7 +1389,7 @@
driver = to_usb_driver(dev->driver);
/* there's only one USB suspend state */
- if (intf->dev.power.power_state)
+ if (intf->dev.power.power_state.event)
return 0;
if (driver->suspend)
Index: drivers/usb/host/ehci-dbg.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/usb/host/ehci-dbg.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/usb/host/ehci-dbg.c (mode:100644)
@@ -641,7 +641,7 @@
spin_lock_irqsave (&ehci->lock, flags);
- if (bus->controller->power.power_state) {
+ if (bus->controller->power.power_state.event) {
size = scnprintf (next, size,
"bus %s, device %s (driver " DRIVER_VERSION ")\n"
"SUSPENDED (no register access)\n",
Index: drivers/usb/host/ohci-dbg.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/usb/host/ohci-dbg.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/usb/host/ohci-dbg.c (mode:100644)
@@ -631,7 +631,7 @@
hcd->product_desc,
hcd_name);
- if (bus->controller->power.power_state) {
+ if (bus->controller->power.power_state.event) {
size -= scnprintf (next, size,
"SUSPENDED (no register access)\n");
goto done;
Index: drivers/usb/host/sl811-hcd.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/usb/host/sl811-hcd.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/usb/host/sl811-hcd.c (mode:100644)
@@ -1781,9 +1781,9 @@
if (phase != SUSPEND_POWER_DOWN)
return retval;
- if (state <= PM_SUSPEND_MEM)
+ if (state.event == PM_EVENT_FREEZE)
retval = sl811h_hub_suspend(hcd);
- else
+ else if (state.event == PM_EVENT_SUSPEND)
port_power(sl811, 0);
if (retval == 0)
dev->power.power_state = state;
@@ -1802,7 +1802,7 @@
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
- if (dev->power.power_state > PM_SUSPEND_MEM
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND
|| !hcd->can_wakeup) {
sl811->port1 = 0;
port_power(sl811, 1);
Index: drivers/video/aty/atyfb_base.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/video/aty/atyfb_base.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/video/aty/atyfb_base.c (mode:100644)
@@ -2071,12 +2071,12 @@
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
acquire_console_sem();
- if (pdev->dev.power.power_state == 2)
+ if (pdev->dev.power.power_state.event == 2)
aty_power_mgmt(0, par);
par->asleep = 0;
Index: drivers/video/aty/radeon_pm.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/video/aty/radeon_pm.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/video/aty/radeon_pm.c (mode:100644)
@@ -2526,18 +2526,18 @@
struct radeonfb_info *rinfo = info->par;
int i;
- if (state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
- pci_name(pdev), state);
+ pci_name(pdev), state.event);
/* For suspend-to-disk, we cheat here. We don't suspend anything and
* let fbcon continue drawing until we are all set. That shouldn't
* really cause any problem at this point, provided that the wakeup
* code knows that any state in memory may not match the HW
*/
- if (state != PM_SUSPEND_MEM)
+ if (state.event == PM_EVENT_FREEZE)
goto done;
acquire_console_sem();
@@ -2616,7 +2616,7 @@
struct radeonfb_info *rinfo = info->par;
int rc = 0;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
if (rinfo->no_schedule) {
@@ -2626,7 +2626,7 @@
acquire_console_sem();
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
- pci_name(pdev), pdev->dev.power.power_state);
+ pci_name(pdev), pdev->dev.power.power_state.event);
if (pci_enable_device(pdev)) {
@@ -2637,7 +2637,7 @@
}
pci_set_master(pdev);
- if (pdev->dev.power.power_state == PM_SUSPEND_MEM) {
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
/* Wakeup chip. Check from config space if we were powered off
* (todo: additionally, check CLK_PIN_CNTL too)
*/
Index: drivers/video/i810/i810_main.c
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/drivers/video/i810/i810_main.c (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/drivers/video/i810/i810_main.c (mode:100644)
@@ -1506,12 +1506,12 @@
struct i810fb_par *par = (struct i810fb_par *) info->par;
int blank = 0, prev_state = par->cur_state;
- if (state == prev_state)
+ if (state.event == prev_state)
return 0;
- par->cur_state = state;
+ par->cur_state = state.event;
- switch (state) {
+ switch (state.event) {
case 1:
blank = VESA_VSYNC_SUSPEND;
break;
Index: include/linux/pm.h
===================================================================
--- cdda23a10f60ce0fce85bd8b8667e7c7cf022118/include/linux/pm.h (mode:100644)
+++ 24a21ff5302734d40e08c400b14c0c1624cceded/include/linux/pm.h (mode:100644)
@@ -185,7 +185,9 @@
struct device;
-typedef u32 __bitwise pm_message_t;
+typedef struct pm_message {
+ int event;
+} pm_message_t;
/*
* There are 4 important states driver can be in:
@@ -205,9 +207,13 @@
* or something similar soon.
*/
-#define PMSG_FREEZE ((__force pm_message_t) 3)
-#define PMSG_SUSPEND ((__force pm_message_t) 3)
-#define PMSG_ON ((__force pm_message_t) 0)
+#define PM_EVENT_ON 0
+#define PM_EVENT_FREEZE 1
+#define PM_EVENT_SUSPEND 2
+
+#define PMSG_FREEZE ({struct pm_message m; m.event = PM_EVENT_FREEZE; m; })
+#define PMSG_SUSPEND ({struct pm_message m; m.event = PM_EVENT_SUSPEND; m; })
+#define PMSG_ON ({struct pm_message m; m.event = PM_EVENT_ON; m; })
struct dev_pm_info {
pm_message_t power_state;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]