adding what i missed in the first place :)
Signed-off-by: Daniel Ritz <[email protected]>
On Tuesday 24 May 2005 01.18, Chris Wright wrote:
> During a warm boot the device is in D3 and has troubles coming out of it.
>
> Signed-off-by: Andrew Morton <[email protected]>
> Signed-off-by: Linus Torvalds <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
>
> ---
> drivers/net/3c59x.c | 9 ++++++---
> 1 files changed, 6 insertions(+), 3 deletions(-)
>
> --- linux-2.6.11.10.orig/drivers/net/3c59x.c 2005-05-20 09:34:18.788560304
> -0700 +++ linux-2.6.11.10/drivers/net/3c59x.c 2005-05-20 09:34:22.644974040
> -0700 @@ -1581,7 +1581,8 @@
>
> if (VORTEX_PCI(vp)) {
> pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */
> - pci_restore_state(VORTEX_PCI(vp));
> + if (vp->pm_state_valid)
> + pci_restore_state(VORTEX_PCI(vp));
> pci_enable_device(VORTEX_PCI(vp));
> }
>
> @@ -2741,6 +2742,7 @@
> outl(0, ioaddr + DownListPtr);
>
> if (final_down && VORTEX_PCI(vp)) {
> + vp->pm_state_valid = 1;
> pci_save_state(VORTEX_PCI(vp));
> acpi_set_WOL(dev);
> }
> @@ -3243,9 +3245,10 @@
> outw(RxEnable, ioaddr + EL3_CMD);
>
> pci_enable_wake(VORTEX_PCI(vp), 0, 1);
> +
> + /* Change the power state to D3; RxEnable doesn't take effect. */
> + pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot);
> }
> - /* Change the power state to D3; RxEnable doesn't take effect. */
> - pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot);
> }
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
