Re: promise sx8 sata driver

[Kallol Biswas <kallol@nucleodyne.com>]

How good is 2.6.6 carmel.c driver for sx8 adapters? Does it support
the promise adapter? Why have you developed sx8.c?
 

On Mon, 2005-05-23 at 15:55, Jeff Garzik wrote:
> Chris Haumesser wrote:
> > The sx8 driver does not use libata, and it is a separate block device,
> > outside of the scsi and ata hierarchies.  If I compile the driver into
> > my kernel, I end up with /dev/sx8/0 and /dev/sx8/0p1, etc.  However, no
> > scsi disk devices are created, and grub does not recognize that
> > /dev/sx8/ devices are disks.  There's no indication in /proc/scsi/ that
> > they are being registered with the scsi subsystem; this is clearly
> > different from every other sata controller I've used.  I've been
> > googling this for days, with no real luck.  I have found changelogs for
> > grub that suggest that my version (0.95) should support booting from the
> > sx8.
> 
> sx8 is a separate block driver, and has nothing whatsoever to do with scsi.
> 
> 
> > So my question is, how does one use this driver for sata disks?  Is my
> > problem a grub problem, or does it have something to do with the fact
> 
> a grub problem
> 
> 
> > What is the relationship between the promise driver and the one included
> > in the kernel?  Why does one work differently from the other?  Is there
> 
> Promise SX8 provides neither an ATA nor SCSI interface to the developer, 
> so its not written as an ATA or SCSI driver.
> 
> 	Jeff
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/