Re: DMA not works in Linux 2.6.12, but in Windows works fine.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Helge Pomorin wrote:
2005/5/23, Sergey Vlasov <[email protected]>:

This is a known problem - if the Intel ICH5/6 controller is used in
combined mode (SATA mapped to legacy IDE ports), DMA for PATA devices
does not work.  If you reconfigure the controller in BIOS to not use the
combined mode (so that the SATA part becomes a separate PCI device), DMA
for PATA devices will work fine.

To IDE developers: Is something planned to work around this problem?
AFAIK, there are some machines where BIOS does not provide an option to
turn off the combined mode.


Hi there,
Got similar looking problem here,

It's completely different.


i cant change sata modes or something alike...

That doesn't matter under SATA.


I get *disabling irq* message with Intel ICH 4 / SIL 3112 A rev 01
SATA Controller on Asus P4G8X Deluxe board (P4 Northwood, Intel
*granite bay* E702 Chipsets) at distros which using newer kernel than

This is a totally different problem.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux