Patch 2/2 for review by the linux-scsi crowd.
Please do not apply.
Patch is via Mark Lord,
It's not ready for upstream, but I am posting it for two reasons:
1) People might find the feature useful (warning warning do not use in
production, just a test feature, might cook your hard drive and all your
data, standard disclaimer...)
2) Get comments from linux-scsi folks about the SCSI changes.
Index: drivers/scsi/ahci.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/ahci.c (mode:100644 sha1:da5bd33d982d7e521b6b0603adcb0911395b184d)
+++ uncommitted/drivers/scsi/ahci.c (mode:100644)
@@ -201,6 +201,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations ahci_ops = {
@@ -272,6 +274,8 @@
.id_table = ahci_pci_tbl,
.probe = ahci_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
Index: drivers/scsi/ata_piix.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/ata_piix.c (mode:100644 sha1:3867f91ef8c7bebe3d0edf0bd2e3b326a1d4061b)
+++ uncommitted/drivers/scsi/ata_piix.c (mode:100644)
@@ -104,6 +104,8 @@
.id_table = piix_pci_tbl,
.probe = piix_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static Scsi_Host_Template piix_sht = {
@@ -124,6 +126,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations piix_pata_ops = {
Index: drivers/scsi/libata-core.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/libata-core.c (mode:100644 sha1:0b5d3a5b7edab5ce17889a0e698805ce346b4d1a)
+++ uncommitted/drivers/scsi/libata-core.c (mode:100644)
@@ -3299,6 +3299,104 @@
ata_qc_complete(qc, ATA_ERR);
}
+/*
+ * Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
+ * without filling any other registers
+ */
+static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev,
+ u8 cmd)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ qc->tf.command = cmd;
+ qc->tf.flags |= ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_NODATA;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (!rc)
+ wait_for_completion(&wait);
+
+ return rc;
+}
+
+static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev)
+{
+ u8 cmd;
+
+ if (!ata_try_flush_cache(dev))
+ return 0;
+
+ if (ata_id_has_flush_ext(dev->id))
+ cmd = ATA_CMD_FLUSH_EXT;
+ else
+ cmd = ATA_CMD_FLUSH;
+
+ return ata_do_simple_cmd(ap, dev, cmd);
+}
+
+static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev)
+{
+ return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1);
+}
+
+static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
+{
+ return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE);
+}
+
+/**
+ * ata_device_resume - wakeup a previously suspended devices
+ *
+ * Kick the drive back into action, by sending it an idle immediate
+ * command and making sure its transfer mode matches between drive
+ * and host.
+ *
+ */
+int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
+{
+ if (ap->flags & ATA_FLAG_SUSPENDED) {
+ ap->flags &= ~ATA_FLAG_SUSPENDED;
+ ata_set_mode(ap);
+ }
+ if (!ata_dev_present(dev))
+ return 0;
+ if (dev->class == ATA_DEV_ATA)
+ ata_start_drive(ap, dev);
+
+ return 0;
+}
+
+/**
+ * ata_device_suspend - prepare a device for suspend
+ *
+ * Flush the cache on the drive, if appropriate, then issue a
+ * standbynow command.
+ *
+ */
+int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
+{
+ if (!ata_dev_present(dev))
+ return 0;
+ if (dev->class == ATA_DEV_ATA)
+ ata_flush_cache(ap, dev);
+
+ ata_standby_drive(ap, dev);
+ ap->flags |= ATA_FLAG_SUSPENDED;
+ return 0;
+}
+
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -3937,6 +4035,23 @@
return (tmp == bits->val) ? 1 : 0;
}
+
+int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+ return 0;
+}
+
+int ata_pci_device_resume(struct pci_dev *pdev)
+{
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+ return 0;
+}
#endif /* CONFIG_PCI */
@@ -4021,4 +4136,11 @@
EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
+EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
+EXPORT_SYMBOL_GPL(ata_pci_device_resume);
#endif /* CONFIG_PCI */
+
+EXPORT_SYMBOL_GPL(ata_device_suspend);
+EXPORT_SYMBOL_GPL(ata_device_resume);
+EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
+EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
Index: drivers/scsi/libata-scsi.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/libata-scsi.c (mode:100644 sha1:4c96df060c3bad9af44ab4c4664d8cba38c63030)
+++ uncommitted/drivers/scsi/libata-scsi.c (mode:100644)
@@ -387,6 +387,22 @@
return 0;
}
+int ata_scsi_device_resume(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_resume(ap, dev);
+}
+
+int ata_scsi_device_suspend(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_suspend(ap, dev);
+}
+
/**
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
* @qc: Storage for translated ATA taskfile
Index: drivers/scsi/sata_nv.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_nv.c (mode:100644 sha1:69009f853a4917f54a88aa0c2cf3e6fb0428c8f7)
+++ uncommitted/drivers/scsi/sata_nv.c (mode:100644)
@@ -187,6 +187,8 @@
.id_table = nv_pci_tbl,
.probe = nv_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static Scsi_Host_Template nv_sht = {
@@ -207,6 +209,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations nv_ops = {
Index: drivers/scsi/sata_promise.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_promise.c (mode:100644 sha1:19a13e3590f4eca5fab24675ffec12aaa56dd57f)
+++ uncommitted/drivers/scsi/sata_promise.c (mode:100644)
@@ -103,6 +103,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations pdc_ata_ops = {
@@ -178,6 +180,8 @@
.id_table = pdc_ata_pci_tbl,
.probe = pdc_ata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
Index: drivers/scsi/sata_qstor.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_qstor.c (mode:100644 sha1:dfd3621047171dc748ba9a11c82a418f89faaed6)
+++ uncommitted/drivers/scsi/sata_qstor.c (mode:100644)
@@ -140,6 +140,8 @@
.dma_boundary = QS_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations qs_ata_ops = {
@@ -191,6 +193,8 @@
.id_table = qs_ata_pci_tbl,
.probe = qs_ata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
Index: drivers/scsi/sata_sil.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_sil.c (mode:100644 sha1:f0489dc302a03054d6461ba54c9705f30190a8f4)
+++ uncommitted/drivers/scsi/sata_sil.c (mode:100644)
@@ -115,6 +115,8 @@
.id_table = sil_pci_tbl,
.probe = sil_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static Scsi_Host_Template sil_sht = {
@@ -135,6 +137,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations sil_ops = {
Index: drivers/scsi/sata_sis.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_sis.c (mode:100644 sha1:5105ddd08447807df3710492f70c31bf6f0d8767)
+++ uncommitted/drivers/scsi/sata_sis.c (mode:100644)
@@ -71,6 +71,8 @@
.id_table = sis_pci_tbl,
.probe = sis_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static Scsi_Host_Template sis_sht = {
@@ -91,6 +93,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations sis_ops = {
Index: drivers/scsi/sata_svw.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_svw.c (mode:100644 sha1:8d1a5d25c05364e41e7f98198b94335ed30d0046)
+++ uncommitted/drivers/scsi/sata_svw.c (mode:100644)
@@ -289,6 +289,8 @@
#endif
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
@@ -458,6 +460,8 @@
.id_table = k2_sata_pci_tbl,
.probe = k2_sata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
Index: drivers/scsi/sata_sx4.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_sx4.c (mode:100644 sha1:70118650c461e9d5d10ff0c3053ae5b49c6755a0)
+++ uncommitted/drivers/scsi/sata_sx4.c (mode:100644)
@@ -189,6 +189,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations pdc_20621_ops = {
@@ -235,6 +237,8 @@
.id_table = pdc_sata_pci_tbl,
.probe = pdc_sata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
Index: drivers/scsi/sata_uli.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_uli.c (mode:100644 sha1:0bff4f475f262c5c40254aecf85bd6a7137bd04e)
+++ uncommitted/drivers/scsi/sata_uli.c (mode:100644)
@@ -63,6 +63,8 @@
.id_table = uli_pci_tbl,
.probe = uli_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static Scsi_Host_Template uli_sht = {
@@ -83,6 +85,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations uli_ops = {
Index: drivers/scsi/sata_via.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_via.c (mode:100644 sha1:3a7830667277f35f71a83db5705b8cb2d376bafc)
+++ uncommitted/drivers/scsi/sata_via.c (mode:100644)
@@ -83,6 +83,8 @@
.id_table = svia_pci_tbl,
.probe = svia_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static Scsi_Host_Template svia_sht = {
@@ -103,6 +105,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations svia_sata_ops = {
Index: drivers/scsi/sata_vsc.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/sata_vsc.c (mode:100644 sha1:2c28f0ad73c204420aa4b419a60341a8b801d7fa)
+++ uncommitted/drivers/scsi/sata_vsc.c (mode:100644)
@@ -206,6 +206,8 @@
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
@@ -382,6 +384,8 @@
.id_table = vsc_sata_pci_tbl,
.probe = vsc_sata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
Index: drivers/scsi/scsi_lib.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/scsi_lib.c (mode:100644 sha1:d18da21c9c57e0ef590369ea815b7b1adba4042b)
+++ uncommitted/drivers/scsi/scsi_lib.c (mode:100644)
@@ -1855,8 +1855,9 @@
void
scsi_device_resume(struct scsi_device *sdev)
{
- if(scsi_device_set_state(sdev, SDEV_RUNNING))
+ if (scsi_device_set_state(sdev, SDEV_RUNNING))
return;
+
scsi_run_queue(sdev->request_queue);
}
EXPORT_SYMBOL(scsi_device_resume);
Index: drivers/scsi/scsi_sysfs.c
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/drivers/scsi/scsi_sysfs.c (mode:100644 sha1:e75ee4671ee3a0a6dcb608a73d6bd2f4007eff09)
+++ uncommitted/drivers/scsi/scsi_sysfs.c (mode:100644)
@@ -199,9 +199,40 @@
return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
}
+static int scsi_bus_suspend(struct device * dev, pm_message_t state)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_host_template *sht = sdev->host->hostt;
+ int err;
+
+ err = scsi_device_quiesce(sdev);
+ if (err)
+ return err;
+
+ if (sht->suspend)
+ err = sht->suspend(sdev);
+
+ return err;
+}
+
+static int scsi_bus_resume(struct device * dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_host_template *sht = sdev->host->hostt;
+ int err = 0;
+
+ if (sht->resume)
+ err = sht->resume(sdev);
+
+ scsi_device_resume(sdev);
+ return err;
+}
+
struct bus_type scsi_bus_type = {
.name = "scsi",
.match = scsi_bus_match,
+ .suspend = scsi_bus_suspend,
+ .resume = scsi_bus_resume,
};
int scsi_sysfs_register(void)
Index: include/linux/ata.h
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/include/linux/ata.h (mode:100644 sha1:f178894edd04f954a4f650661175b5fe009011c6)
+++ uncommitted/include/linux/ata.h (mode:100644)
@@ -125,6 +125,8 @@
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
+ ATA_CMD_STANDBYNOW1 = 0xE0,
+ ATA_CMD_IDLEIMMEDIATE = 0xE1,
/* SETFEATURES stuff */
SETFEATURES_XFER = 0x03,
Index: include/linux/libata.h
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/include/linux/libata.h (mode:100644 sha1:505160ab472b0198ec5393380ce7c21b2fad85d1)
+++ uncommitted/include/linux/libata.h (mode:100644)
@@ -113,6 +113,7 @@
ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */
ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
+ ATA_FLAG_SUSPENDED = (1 << 9), /* port is suspended */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
@@ -387,6 +388,8 @@
extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
+extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state);
+extern int ata_pci_device_resume(struct pci_dev *pdev);
#endif /* CONFIG_PCI */
extern int ata_device_add(struct ata_probe_ent *ent);
extern int ata_scsi_detect(Scsi_Host_Template *sht);
@@ -395,6 +398,10 @@
extern int ata_scsi_error(struct Scsi_Host *host);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+extern int ata_scsi_device_resume(struct scsi_device *);
+extern int ata_scsi_device_suspend(struct scsi_device *);
+extern int ata_device_resume(struct ata_port *, struct ata_device *);
+extern int ata_device_suspend(struct ata_port *, struct ata_device *);
/*
* Default driver ops implementations
*/
Index: include/scsi/scsi_host.h
===================================================================
--- b023d524fb0a3b71aa0b957ce7c5540611497370/include/scsi/scsi_host.h (mode:100644 sha1:1cee1e100943dafe00c14d5329b73659062a4d1a)
+++ uncommitted/include/scsi/scsi_host.h (mode:100644)
@@ -270,6 +270,12 @@
int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);
/*
+ * suspend support
+ */
+ int (*resume)(struct scsi_device *);
+ int (*suspend)(struct scsi_device *);
+
+ /*
* Name of proc directory
*/
char *proc_name;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
