Promise TX4 { DriveReady SeekComplete Error }

[Andre Russ <russ@laba9.de>]

Hi,

I get the following error an my hardware:

May 20 11:28:30 ss1 kernel: ata6: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:30 ss1 kernel: ata6: called with no error (51)!
May 20 11:28:32 ss1 kernel: ata6: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:32 ss1 kernel: ata6: called with no error (51)!
May 20 11:28:32 ss1 kernel: ata7: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:32 ss1 kernel: ata7: called with no error (51)!
May 20 11:28:35 ss1 kernel: ata8: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:35 ss1 kernel: ata8: called with no error (51)!
May 20 11:28:43 ss1 kernel: ata5: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:28:43 ss1 kernel: ata5: called with no error (51)!
May 20 11:29:14 ss1 kernel: ata8: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:29:14 ss1 kernel: ata8: called with no error (51)!
May 20 11:29:35 ss1 kernel: ata8: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:29:35 ss1 kernel: ata8: called with no error (51)!
May 20 11:29:35 ss1 kernel: ata8: status=0x51 { DriveReady SeekComplete
Error }
May 20 11:29:35 ss1 kernel: ata8: called with no error (51)!

I am using a Promise TX4 SATAII150 controller. I have the same issue on
multiple hardwares (different boards, different processors). I am very
sure it is not a problem with the cableing or any other part in the box,
because I exchanged every part behind the controller with other parts.
HDD's and cables work excellent on a ICH6.
I tried with the latest stable kerenel (2.6.11.x) and even with the
newer 2.6.12rc4 where ordered flushing was introduced, but it does not
solve the problem.

Any ideas ?

Regards
Andre Russ
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/