Re: SATA/ATAPI

["Tais M. Hansen" <tais.hansen@osd.dk>]

On Sunday 24 April 2005 18:55, Jeff Garzik wrote:
> > I've been digging through sr, scsi, sata_via, libata-scsi and
> > libata-core, littering the code with printk's.
> > My lack of knowledge on how the kernel handles devices, is really showing
> > now.
> > I've been unable to figure out what is supposed to tie sr to the devices
> > probed by sata_via. Also, littering sr with printk's gave me the idea
> > that sr is not even looking for cdrom devices. It loads, does the basic
> > module __init stuff and then silence. Should sr find devices itself or is
> > the kernel supposed to inform sr via some callback hook? I could really
> > be barking up the wrong tree here, and not even see it.
> > Enabling SCSI logging and kernel debug didn't really give me anything
> > useful.
> Did you turn on ATA_ENABLE_ATAPI in include/linux/libata.h?

Tried with it both defined and undefined. When it's defined an extra line is 
added (the last one below) when loading the sata_via module:

sata_via version 1.1
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
sata_via(0000:00:0f.0): routed to hard irq line 4
ata3: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20
ata4: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20
ata3: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 
88:0007
ata3: dev 0 ATAPI, max UDMA/33
ata3: dev 0 configured for UDMA/33
scsi2 : sata_via
ata4: no device found (phy stat 00000000)
scsi3 : sata_via
ata3: command 0xa0 timeout, stat 0xd0 host_stat 0x1

-- 
Regards,
Tais M. Hansen
OSD

___________________________________________________________
"If people had understood how patents would be granted when most of today's 
ideas were invented and had taken out patents, the industry would be at a 
complete standstill today." -Bill Gates (1991)

Attachment: pgpisxRASBVvk.pgp
Description: PGP signature