On Friday 22 April 2005 13:14, Wakko Warner wrote: > > One of my linux boxes has a Plextor DVD-RW drive with a SATA interface. > > The kernel sees this drive (ata3) but apparently doesn't tie it to a sdx > > device. The box also have a SATA harddisk, which is working just fine. > > The relevant dmesg output is pasted below. > I thought all SCSI cdroms were using /dev/scdx or /dev/srx. Atleast all > mine are (I use ide-scsi for ide disks) You thought right. The "/dev/sdx" was just a typo on my side. -- Regards, Tais M. Hansen OSD ___________________________________________________________ "If people had understood how patents would be granted when most of today's ideas were invented and had taken out patents, the industry would be at a complete standstill today." -Bill Gates (1991)
Attachment:
pgpSjdZGRdo92.pgp
Description: PGP signature
- References:
- SATA/ATAPI
- From: "Tais M. Hansen" <[email protected]>
- Re: SATA/ATAPI
- From: Wakko Warner <[email protected]>
- SATA/ATAPI
- Prev by Date: Re: SATA/ATAPI
- Next by Date: Re: 2.6.12-rc3 compile failure in tgafb.c
- Previous by thread: Re: SATA/ATAPI
- Next by thread: Re: SATA/ATAPI
- Index(es):