RE: 2.6.12-rc2-mm3 pciehp regression

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday, April 15, 2005 12:48 PM, Tom Duffy wrote:
> From: "Sy, Dely L" <[email protected]>
> > Thanks for reporting this.  I'll look into it.  Which was the last 
> > kernel you tested on your hw and worked for you?

> That is a good question.  I think it was a 2.6.11 kernel.  It was 
> definately before express was moved to a different directory, 
> whenever that occured.

Tom,

I was not able to duplicate this problem on my system yet for I have
trouble in getting my system booted up on 2.6.12-rc2-mm3.  I did some
back-tracking and found that the boot problem occurred also with 
2.6.12-rc2-mm2 & 2.6.12-rc2-mm3, and on two systems using IDE as boot 
drive. The config file I used worked fine on 2.6.11.7. I tried 
different config file without success.

The errors I encountered were:
Reading all physical volumes.  This may take a while...
Umount /sys failed: 16
mount: error 6 mounting ext3
mount: error 2 mounting none
Switching to new root
Switchroot: mount failed 22
umount /initrd/dev failed: 2

I also encountered issue you & others discussed in the thread on
"Re: Heads up on 2.6.12-rc1 and later" if I used SCSI drive.

Can you send me the config file you used successfully on your 
system?

Thanks,
Dely
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux