I've worked out what the problem is - this machine has more than 4GB
memory and I didn't have IOMMU compiled in - rebuilding the kernel with
this set and the problem goes away.
James Pearson
James Pearson wrote:
I'm using a Dell PowerEdge 2850 with dual 3.6Ghz Xeon EM64T CPUs.
Using a vanilla 2.4.30 SMP x86_64 kernel, when I try to modprobe
usb-uhci I get:
kernel BUG in header file at line 160
Kernel BUG at panic:149
invalid operand: 0000
dmesg and ksymoops output below.
Thanks
James Pearson
dmesg:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:44:32 Apr 17 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x9ce0, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x9cc0, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x9ca0, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1d.0-1, assigned address 2
kernel BUG in header file at line 160
Kernel BUG at panic:149
invalid operand: 0000
CPU 1
Pid: 1380, comm: khubd Not tainted
RIP: 0010:[<ffffffff80121ae4>]
RSP: 0018:000001023c3ddcd8 EFLAGS: 00010016
RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000
RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000
RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff803daa00(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0
Process khubd (pid: 1380, stackpage=1023c3dd000)
Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400
ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200
00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68
Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>]
[<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>]
[<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>]
[<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>]
[<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]
Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90
RIP [<ffffffff80121ae4>] RSP <000001023c3ddcd8>
ksymoops:
ksymoops 2.4.11 on x86_64 2.4.30. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.30/ (default)
-m /boot/System.map-2.4.30 (specified)
Error (expand_objects): cannot stat(/lib/xfs.o) for xfs
Error (expand_objects): cannot stat(/lib/raid1.o) for raid1
Error (expand_objects): cannot stat(/lib/mptscsih.o) for mptscsih
Error (expand_objects): cannot stat(/lib/mptbase.o) for mptbase
Error (expand_objects): cannot stat(/lib/sd_mod.o) for sd_mod
Error (expand_objects): cannot stat(/lib/scsi_mod.o) for scsi_mod
SGI XFS with no debug enabled
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
kernel BUG in header file at line 160
Kernel BUG at panic:149
invalid operand: 0000
CPU 1
Pid: 1380, comm: khubd Not tainted
RIP: 0010:[<ffffffff80121ae4>]
Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64
RSP: 0018:000001023c3ddcd8 EFLAGS: 00010016
RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000
RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000
RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff803daa00(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0
Process khubd (pid: 1380, stackpage=1023c3dd000)
Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400
ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200
00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68
Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>]
[<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>]
[<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>]
[<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>]
[<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]
Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90
>>RIP; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====
>>RSI; ffffffff803e4000 <init_task_union+0/2000>
Trace; ffffffff80121ae4 <__out_of_line_bug+14/30>
Trace; ffffffffa013b8c4 <[usb-uhci]uhci_submit_urb+284/410>
Trace; ffffffffa012443a <[usbcore]usb_submit_urb+2a/40>
Trace; ffffffffa012455c <[usbcore]usb_start_wait_urb+ac/1b0>
Trace; ffffffffa01246e3 <[usbcore]usb_internal_control_msg+83/c0>
Trace; ffffffffa012479d <[usbcore]usb_control_msg+7d/a0>
Trace; ffffffffa0125486 <[usbcore]usb_set_address+46/50>
Trace; ffffffffa012602f <[usbcore]usb_new_device+1f/1a0>
Trace; ffffffffa0127c1a <[usbcore]usb_hub_port_connect_change+1ea/240>
Trace; ffffffffa0127dbf <[usbcore]usb_hub_events+14f/2d0>
Trace; ffffffffa0127f95 <[usbcore]usb_hub_thread+55/140>
Trace; ffffffff80110888 <child_rip+8/10>
Trace; ffffffffa0127f40 <[usbcore]usb_hub_thread+0/140>
Trace; ffffffff80110880 <child_rip+0/10>
Code; ffffffff80121ae4 <__out_of_line_bug+14/30>
0000000000000000 <_RIP>:
Code; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====
0: 0f 0b ud2a <=====
Code; ffffffff80121ae6 <__out_of_line_bug+16/30>
2: 02 79 29 add 0x29(%rcx),%bh
Code; ffffffff80121ae9 <__out_of_line_bug+19/30>
5: 80 ff ff cmp $0xff,%bh
Code; ffffffff80121aec <__out_of_line_bug+1c/30>
8: ff (bad)
Code; ffffffff80121aed <__out_of_line_bug+1d/30>
9: ff 95 00 eb fe 90 callq *0xffffffff90feeb00(%rbp)
Code; ffffffff80121af3 <__out_of_line_bug+23/30>
f: 90 nop
Code; ffffffff80121af4 <__out_of_line_bug+24/30>
10: 90 nop
Code; ffffffff80121af5 <__out_of_line_bug+25/30>
11: 90 nop
Code; ffffffff80121af6 <__out_of_line_bug+26/30>
12: 90 nop
Code; ffffffff80121af7 <__out_of_line_bug+27/30>
13: 90 nop
6 errors issued. Results may not be reliable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]