Re: [SATA] status reports updated

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tomasz Chmielewski <[email protected]> writes:

> Andre Tomt wrote:
>> Tomasz Chmielewski wrote:
>> <
>>
>>> [1] although my drive is blacklisted (Seagate barracuda -
>>> ST3200822AS), I "unblacklisted" it to get full performance - it's
>>> under heavy stress for 12th hour, and still no error.
>> It could be that your drive has newer firmware. Too bad firmware
>> upgrades for HD's are hard to come by nowadays.
>
> Is there a way to check what firmware a drive has (either by using
> some software - which would be the best option, or by reading a label
> on a drive)?

Seagate drives have the firmware version printed on the label.  The
version is also visible in "dmesg" output:

  Vendor: ATA       Model: ST3160827AS       Rev: 3.03
  Type:   Direct-Access                      ANSI SCSI revision: 05

The "Rev" number is the firmware version.

-- 
Måns Rullgård
[email protected]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux