So, I plugged in e680 motorola phone, played a bit with minicom on /dev/ttyACM0, and when I closed minicom, got this oops. USB is useless, got to reboot computer to use it again! it's vanilla 2.6.11.7 oops attached.
ksymoops 2.4.9 on i686 2.6.11.7. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.11.7/ (default)
-m /boot/System.map-2.6.11.7 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01efc59>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246 (2.6.11.7)
eax: 00000000 ebx: 00000000 ecx: ffffffff edx: c17d3df8
esi: 00000001 edi: 00000000 ebp: c74a9d70 esp: c74a9d64
ds: 007b es: 007b ss: 0068
Stack: c03a38e0 c17d3dd4 d269e378 c74a9d94 c01efcda c17d3df8 c041e888 d4b03d2c
00000001 c03a38e0 c17d3dd4 d269e378 c74a9dd8 c025f75c c17d3df8 000000d0
d269e360 d5efc829 c74a9dc4 c01f3818 d5efc829 2a1037d7 00000000 d3481e6c
Call Trace:
[<c010340f>] show_stack+0x7f/0xa0
[<c01035a6>] show_registers+0x156/0x1d0
[<c01037a8>] die+0xc8/0x150
[<c0114d62>] do_page_fault+0x462/0x699
[<c01030a7>] error_code+0x2b/0x30
[<c01efcda>] kobject_get_path+0x1a/0x70
[<c025f75c>] class_hotplug+0x6c/0x1b0
[<c01f09bb>] kobject_hotplug+0x1cb/0x2b0
[<c01f009b>] kobject_del+0x1b/0x30
[<c025fc14>] class_device_del+0xa4/0xc0
[<c025fc42>] class_device_unregister+0x12/0x20
[<e0fcf529>] acm_tty_close+0xc9/0x110 [cdc_acm]
[<c024921d>] release_dev+0x6ad/0x7f0
[<c0249801>] tty_release+0x11/0x20
[<c0154a9c>] __fput+0xec/0x120
[<c01531d0>] filp_close+0x50/0x90
[<c015325c>] sys_close+0x4c/0x70
[<c0102e93>] syscall_call+0x7/0xb
Code: e6 89 34 24 e8 99 11 fa ff eb dc 8d b4 26 00 00 00 00 55 89 e5 8b 55 08 57 56 be 01 00 00 00 53 31 db 8b 3a b9 ff ff ff ff 89 d8 <f2> ae f7 d1 49 8b 52 24 8d 74 31 01 85 d2 75 e7 5b 89 f0 5e 5f
>>EIP; c01efc59 <get_kobj_path_length+19/30> <=====
>>ecx; ffffffff <__kernel_rt_sigreturn+1bbf/????>
>>edx; c17d3df8 <pg0+13a0df8/3fbcb400>
>>ebp; c74a9d70 <pg0+7076d70/3fbcb400>
>>esp; c74a9d64 <pg0+7076d64/3fbcb400>
Trace; c010340f <show_stack+7f/a0>
Trace; c01035a6 <show_registers+156/1d0>
Trace; c01037a8 <die+c8/150>
Trace; c0114d62 <do_page_fault+462/699>
Trace; c01030a7 <error_code+2b/30>
Trace; c01efcda <kobject_get_path+1a/70>
Trace; c025f75c <class_hotplug+6c/1b0>
Trace; c01f09bb <kobject_hotplug+1cb/2b0>
Trace; c01f009b <kobject_del+1b/30>
Trace; c025fc14 <class_device_del+a4/c0>
Trace; c025fc42 <class_device_unregister+12/20>
Trace; e0fcf529 <pg0+20b9c529/3fbcb400>
Trace; c024921d <release_dev+6ad/7f0>
Trace; c0249801 <tty_release+11/20>
Trace; c0154a9c <__fput+ec/120>
Trace; c01531d0 <filp_close+50/90>
Trace; c015325c <sys_close+4c/70>
Trace; c0102e93 <syscall_call+7/b>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c01efc2e <create_dir+3e/50>
00000000 <_EIP>:
Code; c01efc2e <create_dir+3e/50>
0: e6 89 out %al,$0x89
Code; c01efc30 <create_dir+40/50>
2: 34 24 xor $0x24,%al
Code; c01efc32 <create_dir+42/50>
4: e8 99 11 fa ff call fffa11a2 <_EIP+0xfffa11a2>
Code; c01efc37 <create_dir+47/50>
9: eb dc jmp ffffffe7 <_EIP+0xffffffe7>
Code; c01efc39 <create_dir+49/50>
b: 8d b4 26 00 00 00 00 lea 0x0(%esi),%esi
Code; c01efc40 <get_kobj_path_length+0/30>
12: 55 push %ebp
Code; c01efc41 <get_kobj_path_length+1/30>
13: 89 e5 mov %esp,%ebp
Code; c01efc43 <get_kobj_path_length+3/30>
15: 8b 55 08 mov 0x8(%ebp),%edx
Code; c01efc46 <get_kobj_path_length+6/30>
18: 57 push %edi
Code; c01efc47 <get_kobj_path_length+7/30>
19: 56 push %esi
Code; c01efc48 <get_kobj_path_length+8/30>
1a: be 01 00 00 00 mov $0x1,%esi
Code; c01efc4d <get_kobj_path_length+d/30>
1f: 53 push %ebx
Code; c01efc4e <get_kobj_path_length+e/30>
20: 31 db xor %ebx,%ebx
Code; c01efc50 <get_kobj_path_length+10/30>
22: 8b 3a mov (%edx),%edi
Code; c01efc52 <get_kobj_path_length+12/30>
24: b9 ff ff ff ff mov $0xffffffff,%ecx
Code; c01efc57 <get_kobj_path_length+17/30>
29: 89 d8 mov %ebx,%eax
This decode from eip onwards should be reliable
Code; c01efc59 <get_kobj_path_length+19/30>
00000000 <_EIP>:
Code; c01efc59 <get_kobj_path_length+19/30> <=====
0: f2 ae repnz scas %es:(%edi),%al <=====
Code; c01efc5b <get_kobj_path_length+1b/30>
2: f7 d1 not %ecx
Code; c01efc5d <get_kobj_path_length+1d/30>
4: 49 dec %ecx
Code; c01efc5e <get_kobj_path_length+1e/30>
5: 8b 52 24 mov 0x24(%edx),%edx
Code; c01efc61 <get_kobj_path_length+21/30>
8: 8d 74 31 01 lea 0x1(%ecx,%esi,1),%esi
Code; c01efc65 <get_kobj_path_length+25/30>
c: 85 d2 test %edx,%edx
Code; c01efc67 <get_kobj_path_length+27/30>
e: 75 e7 jne fffffff7 <_EIP+0xfffffff7>
Code; c01efc69 <get_kobj_path_length+29/30>
10: 5b pop %ebx
Code; c01efc6a <get_kobj_path_length+2a/30>
11: 89 f0 mov %esi,%eax
Code; c01efc6c <get_kobj_path_length+2c/30>
13: 5e pop %esi
Code; c01efc6d <get_kobj_path_length+2d/30>
14: 5f pop %edi
1 warning and 1 error issued. Results may not be reliable.
Attachment:
signature.asc
Description: OpenPGP digital signature
- Follow-Ups:
- Prev by Date: [patch 1/1] nbd: Don't create all MAX_NBD devices by default all the time
- Next by Date: Re: incoming
- Previous by thread: [patch 1/1] nbd: Don't create all MAX_NBD devices by default all the time
- Next by thread: Re: [OOPS] on usb removal, and minicom closing 2.6.11.7
- Index(es):
 |