r8169 native module problems on 2.6.11

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello, I've got a problem with usrobotics r8169 based gigabit ethernet;
kernel module doesn't properly startup, with modprobe r8169; module gets
correctly loaded, but ifconfig doesn't see it, and startup scripts deny
existence of an eth0 dev; meanwhile the r8169 module taken from the
cdrom compiles installs and functions correctly; here's the modinfo for
both:

kernel native module:

author:         Realtek and the Linux r8169 crew <[email protected]>
description:    RealTek RTL-8169 Gigabit Ethernet driver
parmtype:       media:array of int
parmtype:       rx_copybreak:int
parmtype:       use_dac:int
parm:           use_dac:Enable PCI DAC. Unsafe on 32 bit PCI slot.
license:        GPL
version:        2.2LK
vermagic:       2.6.11-gentoo-r5 preempt PENTIUMIII gcc-3.3
depends:
alias:          pci:v000010ECd00008169sv*sd*bc*sc*i*
alias:          pci:v00001186d00004300sv*sd*bc*sc*i*
srcversion:     017DC70C1E25F3AB2CA0324

USrobotics cdrom module:

author:         Realtek
description:    U.S. Robotics 10/100/1000 PCI NIC driver
license:        GPL
vermagic:       2.6.11-gentoo-r5 preempt PENTIUMIII gcc-3.3
depends:
alias:          pci:v000010ECd00008169sv*sd*bc*sc*i*
alias:          pci:v000016ECd00000116sv*sd*bc*sc*i*

and dmesg for both:

kernel native:

ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: U.S. Robotics 10/100/1000 PCI NIC driver version 2.0 at
0xe08ee000, 00:c0:49:f2:86:1e, IRQ 11
eth0: Auto-negotiation Enabled.

USR module:

ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: U.S. Robotics 10/100/1000 PCI NIC driver version 2.0 at
0xe08e6000, 00:c0:49:f2:86:1e, IRQ 11
eth0: Auto-negotiation Enabled.

I don't understand exactly the difference between the two, thought I
could help by posting this fact. Please if you find it irrelevant don't
flame me, since it's my first post to the kernel mailing list, I'd
welcome any suggestions and I will try to post any other information you
request.

Keep on the good work,
Ciao!

Tommy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCWRkRgpUvhTIUBAERApE1AJ9aju0Np0VWGD8ItP30fchnXSwSfQCeLbS4
1EimT1GM7TfC2yWrurNFg24=
=j5ge
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux