[PATCH] Re: Kernel SCM saga..

[Petr Baudis <pasky@ucw.cz>]

Dear diary, on Sat, Apr 09, 2005 at 09:08:59AM CEST, I got a letter
where "Randy.Dunlap" <rddunlap@osdl.org> told me that...
> On Sat, 9 Apr 2005 04:53:57 +0200 Petr Baudis wrote:
..snip..
> |   FWIW, I made few small fixes (to prevent some trivial usage errors to
> | cause cache corruption) and added scripts gitcommit.sh, gitadd.sh and
> | gitlog.sh - heavily inspired by what already went through the mailing
> | list. Everything is available at http://pasky.or.cz/~pasky/dev/git/
> | (including .dircache, even though it isn't shown in the index), the
> | cumulative patch can be found below. The scripts aim to provide some
> | (obviously very interim) more high-level interface for git.
> | 
> |   I'm now working on tree-diff.c which will (surprise!) produce a diff
> | of two trees (I'll finish it after I get some sleep, though), and then I
> | will probably do some dwimmy gitdiff.sh wrapper for tree-diff and
> | show-diff. At that point I might get my hand on some pull more kind to
> | local changes.
> 
> Hi,

  Hi,

> I'll look at your scripts this weekend.  I've also been
> working on some, but mine are a bit more experimental (cruder)
> than yours are.  Anyway, here they are (attached) -- also
> available at http://developer.osdl.org/rddunlap/git/
> 
> gitin : checkin/commit
> gitwhat sha1 : what is that sha1 file (type and contents if blob or commit)
> gitlist (blob, commit, tree, or all) :
> 	list all objects with type (commit, tree, blob, or all)

  thanks - I had a look, but so far I borrowed only the prompt message
from your gitin. ;-) I'm not sure if gitwhat would be useful for me in
any way and gitlist doesn't appear too practical to me either.

  In the meantime, I've made some progress too. I made ls-tree, which
will just convert the tree object to a human readable (and script
processable) form, and wrapper gitls.sh, which will also try to guess
the tree ID. parent-id will just return the commit ID(s) of the previous
commit(s), practical if you want to diff against the previous commit
easily etc.  And finally, there is gitdiff.sh, which will produce a diff
of any two trees.

  Everything is again available at http://pasky.or.cz/~pasky/dev/git/
and again including .dircache, even though it's invisible in the index.
The cumulative patch (against 0.03) is there as well as below, generated
by the

	./gitdiff.sh 0af20307bb4c634722af0f9203dac7b3222c4a4f

command. The empty entries are changed modes (664 vs 644), I will yet
have to think about how to denote them if the content didn't change;
or I might ignore them altogether...?

  You can obviously fetch any arbitrary change by doing the appropriate
gitdiff.sh call. You can find the ids in the ChangeLog, which was
generated by the plain

	./gitlog.sh

command. (That is for HEAD. 0af20307bb4c634722af0f9203dac7b3222c4a4f is
the last commit on the Linus' branch, pass that to gitlog.sh to get his
ChangeLog. ;-)

  Next, I will probably do some bk-style pull tool. Or perhaps first
a gitpatch.sh which will verify the sha1s and do the mode changes.

  Linus, could you please have a look and tell me what do you think
about it so far?

  Thanks,

				Petr Baudis

Index: Makefile
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/Makefile (mode:100664 sha1:270cd4f8a8bf10cd513b489c4aaf76c14d4504a7)
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/Makefile (mode:100644 sha1:185ff422e68984e68da011509dec116f05fc6f8d)
@@ -1,7 +1,7 @@
 CFLAGS=-g -O3 -Wall
 CC=gcc
 
-PROG=update-cache show-diff init-db write-tree read-tree commit-tree cat-file fsck-cache
+PROG=update-cache show-diff init-db write-tree read-tree commit-tree cat-file fsck-cache ls-tree
 
 all: $(PROG)
 
@@ -30,6 +30,9 @@
 cat-file: cat-file.o read-cache.o
 	$(CC) $(CFLAGS) -o cat-file cat-file.o read-cache.o $(LIBS)
 
+ls-tree: ls-tree.o read-cache.o
+	$(CC) $(CFLAGS) -o ls-tree ls-tree.o read-cache.o $(LIBS)
+
 fsck-cache: fsck-cache.o read-cache.o
 	$(CC) $(CFLAGS) -o fsck-cache fsck-cache.o read-cache.o $(LIBS)
 
Index: README
===================================================================
Index: cache.h
===================================================================
Index: cat-file.c
===================================================================
Index: commit-tree.c
===================================================================
Index: fsck-cache.c
===================================================================
Index: gitadd.sh
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/gitadd.sh
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/gitadd.sh (mode:100755 sha1:d23be758c0c9fc1cf9756bcd3ee4d7266c60a2c9)
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# Add new file to a GIT repository.
+# Copyright (c) Petr Baudis, 2005
+#
+# Takes a list of file names at the command line, and schedules them
+# for addition to the GIT repository at the next commit.
+#
+# FIXME: Those files are omitted from show-diff output!
+
+for file in "$@"; do
+	echo $file >>.dircache/add-queue
+done
Index: gitcommit.sh
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/gitcommit.sh
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/gitcommit.sh (mode:100755 sha1:67a743c6cbc9dffaa6f571d3dc83ceec2bd0c039)
@@ -0,0 +1,38 @@
+#!/bin/sh
+#
+# Commit into a GIT repository.
+# Copyright (c) Petr Baudis, 2005
+# Based on an example script fragment sent to LKML by Linus Torvalds.
+#
+# Ignores any parameters for now, excepts changelog entry on stdin.
+#
+# FIXME: Gets it wrong for filenames containing spaces.
+
+
+if [ -r .dircache/add-queue ]; then
+	mv .dircache/add-queue .dircache/add-queue-progress
+	addedfiles=$(cat .dircache/add-queue-progress)
+else
+	addedfiles=
+fi
+changedfiles=$(show-diff -s | grep -v ': ok$' | cut -d : -f 1)
+commitfiles="$addedfiles $changedfiles"
+if [ ! "$commitfiles" ]; then
+	echo 'Nothing to commit.' >&2
+	exit
+fi
+update-cache $commitfiles
+rm -f .dircache/add-queue-progress
+
+
+oldhead=$(cat .dircache/HEAD)
+treeid=$(write-tree)
+
+echo "Enter commit message, terminated by ctrl-D on a separate line:" >&2
+newhead=$(commit-tree $treeid -p $oldhead)
+
+if [ "$newhead" ]; then
+	echo $newhead >.dircache/HEAD
+else
+	echo "Error during commit (oldhead $oldhead, treeid $treeid)" >&2
+fi
Index: gitdiff.sh
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/gitdiff.sh
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/gitdiff.sh (mode:100755 sha1:17aec840c7c0e0b4e4e78fd94b754fe6bc2f2ff2)
@@ -0,0 +1,104 @@
+#!/bin/sh
+#
+# Make a diff between two GIT trees.
+# Copyright (c) Petr Baudis, 2005
+#
+# Takes two parameters identifying the two trees/commits to compare.
+# Empty string will be substitued to HEAD revision.
+#
+# Outputs a diff converting the first tree to the second one.
+
+
+TREE="^tree [A-z0-9]{40}$"
+
+tree1ls=$(mktemp -t gitdiff.XXXXXX)
+tree2ls=$(mktemp -t gitdiff.XXXXXX)
+diffdir=$(mktemp -d -t gitdiff.XXXXXX)
+
+function die () {
+	echo gitdiff: $@ >&2
+	rm -f "$tree1ls" "$tree2ls"
+	rm -rf "$diffdir"
+	exit
+}
+
+function normalize_id () {
+	# XXX: This is basically a copy of gitls.sh
+	id=$1
+	if [ ! "$id" ]; then
+		id=$(cat .dircache/HEAD)
+	fi
+	if [ $(cat-file -t "$id") = "commit" ]; then
+		id=$(cat-file commit $id | egrep "$TREE" | cut -d ' ' -f 2)
+	fi
+	if [ ! $(cat-file -t "$id") = "tree" ]; then
+		die "Invalid ID supplied: $id"
+	fi
+	echo $id
+}
+
+function mkdiff () {
+	loc=$1; treeid=$2; fname=$3; mode=$4; sha1=$5;
+
+	if [ x"$sha1" != x"!" ]; then
+		cat-file blob $sha1 >$loc
+	else
+		>$loc
+	fi
+
+	label="$treeid/$fname";
+
+	labelapp=""
+	[ x"$mode" != x"!" ] && labelapp="$labelapp mode:$mode"
+	[ x"$sha1" != x"!" ] && labelapp="$labelapp sha1:$sha1"
+	labelapp=$(echo "$labelapp" | sed 's/^ *//')
+
+	[ "$labelapp" ] && label="$label  ($labelapp)"
+
+	echo $label
+}
+
+id1=$(normalize_id "$1")
+id2=$(normalize_id "$2")
+
+[ "$2" != "$1" ] || die "Cannot diff tree against itself."
+
+ls-tree "$id1" >$tree1ls
+[ -s "$tree1ls" ] || die "Error retrieving the first tree."
+ls-tree "$id2" >$tree2ls
+[ -s "$tree2ls" ] || die "Error retrieving the second tree."
+
+diffdir1="$diffdir/$id1"
+diffdir2="$diffdir/$id2"
+mkdir $diffdir1 $diffdir2
+
+join -e ! -a 1 -a 2 -j 4 -o 0,1.1,1.3,2.1,2.3 $tree1ls $tree2ls | {
+	while read line; do
+		name=$(echo $line | cut -d ' ' -f 1)
+		mode1=$(echo $line | cut -d ' ' -f 2)
+		sha1=$(echo $line | cut -d ' ' -f 3)
+		mode2=$(echo $line | cut -d ' ' -f 4)
+		sha2=$(echo $line | cut -d ' ' -f 5)
+
+		# XXX: The diff format is currently pretty ugly;
+		# ideally, we should print the sha1 and mode at the
+		# +++ and --- lines, but
+
+		if [ "$mode1" != "$mode2" ] || [ "$sha1" != "$sha2" ]; then
+			echo "Index: $name"
+			echo "==================================================================="
+
+			loc1="$diffdir1/$name"
+			loc2="$diffdir2/$name"
+			mkdir -p $(dirname $loc1) $(dirname $loc2)
+
+			label1=$(mkdiff "$loc1" $id1 "$name" $mode1 $sha1)
+			label2=$(mkdiff "$loc2" $id2 "$name" $mode2 $sha2)
+
+			diff -L "$label1" -L "$label2" -u "$loc1" "$loc2"
+		fi
+	done
+}
+
+rm -f "$tree1ls" "$tree2ls"
+rm -rf "$diffdir"
Index: gitlog.sh
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/gitlog.sh
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/gitlog.sh (mode:100755 sha1:e7a4eed8c0526821d00b08094c73fabb72eff4df)
@@ -0,0 +1,61 @@
+#!/bin/sh
+####
+#### Call this script with an object and it will produce the change
+#### information for all the parents of that object
+####
+#### This script was originally written by Ross Vandegrift.
+# multiple parents test 1d0f4aec21e5b66c441213643426c770dc6dedc0
+# parents: ffa098b2e187b71b86a76d3cd5eb77d074a2503c
+# 6860e0d9197c7f52155466c225baf39b42d62f63
+
+# regex for parent declarations
+PARENTS="^parent [A-z0-9]{40}$"
+
+TMPCL="/tmp/gitlog.$$"
+
+# takes an object and generates the object's parent(s)
+function unpack_parents () {
+	echo "me $1"
+	echo "me $1" >>$TMPCL
+	RENTS=""
+
+	TMPCM=$(mktemp)
+	cat-file commit $1 >$TMPCM
+	while read line; do
+		if echo "$line" | egrep -q "$PARENTS"; then
+			RENTS="$RENTS "$(echo $line | sed 's/parent //g')
+		fi
+		echo $line
+	done <$TMPCM
+	rm $TMPCM
+
+	echo -e "\n--------------------------\n"
+
+	# if the last object had no parents, return
+	if [ ! "$RENTS" ]; then
+		return;
+	fi
+
+	#useful for testing
+	#echo $RENTS
+	#read
+	for i in `echo $RENTS`; do
+		# break cycles
+		if grep -q "me $i" $TMPCL; then
+			echo "Already visited $i" >&2
+			continue
+		else
+			unpack_parents $i
+		fi
+	done
+}
+
+base=$1
+if [ ! "$base" ]; then
+	base=$(cat .dircache/HEAD)
+fi
+
+rm -f $TMPCL
+unpack_parents $base
+rm -f $TMPCL
+
Index: gitls.sh
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/gitls.sh
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/gitls.sh (mode:100755 sha1:4fe78b764ac0ab3cdb16631bbfdd65edb138e47b)
@@ -0,0 +1,22 @@
+#!/bin/sh
+#
+# List contents of a particular tree in a GIT repository.
+# Copyright (c) Petr Baudis, 2005
+#
+# Optionally takes commit or tree id as a parameter, defaulting to HEAD.
+
+TREE="^tree [A-z0-9]{40}$"
+
+id=$1
+if [ ! "$id" ]; then
+	id=$(cat .dircache/HEAD)
+fi
+if [ $(cat-file -t "$id") = "commit" ]; then
+	id=$(cat-file commit $id | egrep "$TREE" | cut -d ' ' -f 2)
+fi
+if [ ! $(cat-file -t "$id") = "tree" ]; then
+	echo "Invalid ID supplied: $id" >&2
+	exit
+fi
+
+ls-tree "$id"
Index: init-db.c
===================================================================
Index: ls-tree.c
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/ls-tree.c
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/ls-tree.c (mode:100644 sha1:ed5b82cd7f41c3ea4140fa1ee4b80b786f190151)
@@ -0,0 +1,51 @@
+/*
+ * GIT - The information manager from hell
+ *
+ * Copyright (C) Linus Torvalds, 2005
+ */
+#include "cache.h"
+
+static int list(unsigned char *sha1)
+{
+	void *buffer;
+	unsigned long size;
+	char type[20];
+
+	buffer = read_sha1_file(sha1, type, &size);
+	if (!buffer)
+		usage("unable to read sha1 file");
+	if (strcmp(type, "tree"))
+		usage("expected a 'tree' node");
+	while (size) {
+		int len = strlen(buffer)+1;
+		unsigned char *sha1 = buffer + len;
+		char *path = strchr(buffer, ' ')+1;
+		unsigned int mode;
+
+		if (size < len + 20 || sscanf(buffer, "%o", &mode) != 1)
+			usage("corrupt 'tree' file");
+		buffer = sha1 + 20;
+		size -= len + 20;
+		/* XXX: We just assume the type is "blob" as it should be.
+		 * It seems worthless to read each file just to get this
+		 * and the file size. -- pasky@ucw.cz */
+		printf("%03o\t%s\t%s\t%s\n", mode, "blob", sha1_to_hex(sha1), path);
+	}
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	unsigned char sha1[20];
+
+	if (argc != 2)
+		usage("ls-tree <key>");
+	if (get_sha1_hex(argv[1], sha1) < 0)
+		usage("ls-tree <key>");
+	sha1_file_directory = getenv(DB_ENVIRONMENT);
+	if (!sha1_file_directory)
+		sha1_file_directory = DEFAULT_DB_ENVIRONMENT;
+	if (list(sha1) < 0)
+		usage("list failed");
+	return 0;
+}
Index: parent-id
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/parent-id
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/parent-id (mode:100755 sha1:198c551b7367988b48aa7a69876e098d73c19e88)
@@ -0,0 +1,15 @@
+#!/bin/sh
+#
+# Get ID of parent commit to a given revision or HEAD.
+# Copyright (c) Petr Baudis, 2005
+#
+# Takes ID of the current commit, defaults to HEAD.
+
+PARENT="^parent [A-z0-9]{40}$"
+
+id=$1
+if [ ! "$id" ]; then
+	id=$(cat .dircache/HEAD)
+fi
+
+cat-file commit $id | egrep "$PARENT" | cut -d ' ' -f 2
Index: read-cache.c
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/read-cache.c (mode:100664 sha1:e51c9ee84874b5ff0f22b11dcd4fe1f905e72a5e)
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/read-cache.c (mode:100644 sha1:3dbe6db46933683721ceafdcdd70da521a32269a)
@@ -264,11 +264,12 @@
 	size = 0; // avoid gcc warning
 	map = (void *)-1;
 	if (!fstat(fd, &st)) {
-		map = NULL;
 		size = st.st_size;
 		errno = EINVAL;
 		if (size > sizeof(struct cache_header))
 			map = mmap(NULL, size, PROT_READ, MAP_PRIVATE, fd, 0);
+		else
+			return (!hdr->entries) ? 0 : error("inconsistent cache");
 	}
 	close(fd);
 	if (-1 == (int)(long)map)
Index: read-tree.c
===================================================================
Index: show-diff.c
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/show-diff.c (mode:100664 sha1:45f6e3140b3923497fdec808aec0e86ecf358b92)
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/show-diff.c (mode:100644 sha1:9beda1382103df29914d965fc135def0e6e7e839)
@@ -49,9 +49,17 @@
 
 int main(int argc, char **argv)
 {
+	int silent = 0;
 	int entries = read_cache();
 	int i;
 
+	while (argc-- > 1) {
+		if (!strcmp(argv[1], "-s"))
+			silent = 1;
+		else if (!strcmp(argv[1], "-h") || !strcmp(argv[1], "--help"))
+			usage("show-diff [-s]");
+	}
+
 	if (entries < 0) {
 		perror("read_cache");
 		exit(1);
@@ -77,6 +85,9 @@
 		for (n = 0; n < 20; n++)
 			printf("%02x", ce->sha1[n]);
 		printf("\n");
+		if (silent)
+			continue;
+
 		new = read_sha1_file(ce->sha1, type, &size);
 		show_differences(ce, &st, new, size);
 		free(new);
Index: update-cache.c
===================================================================
--- 6be98a9e92a3f131a3fdf0dc3a8576fba6421569/update-cache.c (mode:100664 sha1:9dcee6f628d5accaa5219f72a2e790c082d9dd9a)
+++ 3f6cc0ad3e076e05281438b0de69a7d6a5522d17/update-cache.c (mode:100644 sha1:916430a05a9da088dae1ea82eb8d5392033f548a)
@@ -231,6 +231,9 @@
 		return -1;
 	}
 
+	if (argc < 2)
+		usage("update-cache <file>*");
+
 	newfd = open(".dircache/index.lock", O_RDWR | O_CREAT | O_EXCL, 0600);
 	if (newfd < 0) {
 		perror("unable to create new cachefile");
Index: write-tree.c
===================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/