Re: 2.6.12-rc2-mm1: ACPI=y, ACPI_BOOT=n problems

[Steven Cole <elenstev@mesatop.com>]

Adrian Bunk wrote:
> On Wed, Apr 06, 2005 at 12:32:52AM +1200, Reuben Farrelly wrote:
>
> > Hi again
> >
> > At 12:14 a.m. 6/04/2005, Adrian Bunk wrote:
> >
> > > On Tue, Apr 05, 2005 at 08:34:11PM +1200, Reuben Farrelly wrote:
> > >
> > >
> > > > Hi,
> > >
> > > Hi Reuben,
> > >
> > >
> > > > ...
> > > > Hrm. Something changed between the last -mm release which compiled
> > > > through, and this one..
> > > > ...
> > > >  LD      .tmp_vmlinux1
> > > > arch/i386/kernel/built-in.o(.init.text+0x1823): In function `setup_arch':
> > > > : undefined reference to `acpi_boot_table_init'
> > > > arch/i386/kernel/built-in.o(.init.text+0x1828): In function `setup_arch':
> > > > : undefined reference to `acpi_boot_init'
> > > > make: *** [.tmp_vmlinux1] Error 1
> > > > [root@tornado linux-2.6]#
> > > >
> > > > Backing out bk-acpi.patch works around it..
> > >
> > > Please send your .config .
> >
> > Have just figured out that it seems to be caused by having ACPI 
> > disabled in .config, once I re-enabled ACPI the build problem went away.
> >
> > Config attached anyway, I imagine the problem is quite reproduceable..
>
>
> Ah, this was the working .config .
> fter setting CONFIG_ACPI=n I started seeing different but most likely 
> related problems.
>
>
> @Len:
> ACPI=y and ACPI_BOOT=n seems to be a legal configuration (with 
> X86_HT=y), but it breaks into pieces if you try the compilation.

Here is some additional and hopefully helpful information.
Without CONFIG_ACPI=y, I first got:

arch/i386/kernel/setup.c: In function 'setup_arch':
arch/i386/kernel/setup.c:1571: warning: implicit declaration of function 'acpi_boot_table_init'
arch/i386/kernel/setup.c:1572: warning: implicit declaration of function 'acpi_boot_init'

and then at the end:

arch/i386/kernel/built-in.o(.init.text+0x1b81): In function `setup_arch':
: undefined reference to `acpi_boot_table_init'
arch/i386/kernel/built-in.o(.init.text+0x1b86): In function `setup_arch':
: undefined reference to `acpi_boot_init'
make: *** [.tmp_vmlinux1] Error 1

With these set linux-2.6.12-rc2-mm1 built OK.

[steven@spc1 linux-2.6.12-rc2-mm1]$ grep ^CONFIG_ACPI .config
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

Steven
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/