Convert the keyspan USB serial driver to use request_firmware and
firmware_load_ihex.
Signed-off-by: Jan Harkes <[email protected]>
Kconfig | 90 ++++--------------------------------------
keyspan.c | 132 +++++++++++++++++++++++---------------------------------------
keyspan.h | 84 ---------------------------------------
3 files changed, 59 insertions(+), 247 deletions(-)
Index: linux/drivers/usb/serial/keyspan.c
===================================================================
--- linux.orig/drivers/usb/serial/keyspan.c 2005-04-05 15:08:37.000000000 -0400
+++ linux/drivers/usb/serial/keyspan.c 2005-04-05 15:23:47.000000000 -0400
@@ -28,6 +28,9 @@
Change History
+ 2005mar10 Jan Harkes
+ Use generic request_firmware/load_ihex functions.
+
2003sep04 LPM (Keyspan) add support for new single port product USA19HS.
Improve setup message handling for all devices.
@@ -106,6 +109,8 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/firmware.h>
+#include <linux/ihex_parser.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
@@ -1165,13 +1170,28 @@ static void keyspan_close(struct usb_ser
port->tty = NULL;
}
+static int keyspan_fw_load(struct ihex_record *record, void *arg)
+{
+ struct usb_serial *serial = (struct usb_serial *)arg;
+ int ret;
+
+ ret = ezusb_writememory(serial, record->address, record->data,
+ record->len, 0xa0);
+ if (ret < 0) {
+ dev_err(&serial->dev->dev,
+ "ezusb_writememory failed for Keyspan"
+ "firmware (%d %08X %p %d)\n",
+ ret, record->address, record->data, record->len);
+ }
+ return ret;
+}
/* download the firmware to a pre-renumeration device */
static int keyspan_fake_startup (struct usb_serial *serial)
{
int response;
- const struct ezusb_hex_record *record;
- char *fw_name;
+ char *model, fw_name[20];
+ const struct firmware *fw;
dbg("Keyspan startup version %04x product %04x",
le16_to_cpu(serial->dev->descriptor.bcdDevice),
@@ -1182,97 +1202,43 @@ static int keyspan_fake_startup (struct
return(1);
}
- /* Select firmware image on the basis of idProduct */
switch (le16_to_cpu(serial->dev->descriptor.idProduct)) {
- case keyspan_usa28_pre_product_id:
- record = &keyspan_usa28_firmware[0];
- fw_name = "USA28";
- break;
-
- case keyspan_usa28x_pre_product_id:
- record = &keyspan_usa28x_firmware[0];
- fw_name = "USA28X";
- break;
-
- case keyspan_usa28xa_pre_product_id:
- record = &keyspan_usa28xa_firmware[0];
- fw_name = "USA28XA";
- break;
-
- case keyspan_usa28xb_pre_product_id:
- record = &keyspan_usa28xb_firmware[0];
- fw_name = "USA28XB";
- break;
-
- case keyspan_usa19_pre_product_id:
- record = &keyspan_usa19_firmware[0];
- fw_name = "USA19";
- break;
-
- case keyspan_usa19qi_pre_product_id:
- record = &keyspan_usa19qi_firmware[0];
- fw_name = "USA19QI";
- break;
-
- case keyspan_mpr_pre_product_id:
- record = &keyspan_mpr_firmware[0];
- fw_name = "MPR";
- break;
-
- case keyspan_usa19qw_pre_product_id:
- record = &keyspan_usa19qw_firmware[0];
- fw_name = "USA19QI";
- break;
-
- case keyspan_usa18x_pre_product_id:
- record = &keyspan_usa18x_firmware[0];
- fw_name = "USA18X";
- break;
-
- case keyspan_usa19w_pre_product_id:
- record = &keyspan_usa19w_firmware[0];
- fw_name = "USA19W";
- break;
-
- case keyspan_usa49w_pre_product_id:
- record = &keyspan_usa49w_firmware[0];
- fw_name = "USA49W";
- break;
-
- case keyspan_usa49wlc_pre_product_id:
- record = &keyspan_usa49wlc_firmware[0];
- fw_name = "USA49WLC";
- break;
-
+ case keyspan_usa18x_pre_product_id: model = "usa18x"; break;
+ case keyspan_usa19_pre_product_id: model = "usa19"; break;
+ case keyspan_usa19qi_pre_product_id: model = "usa19qi"; break;
+ case keyspan_mpr_pre_product_id: model = "mpr"; break;
+ case keyspan_usa19qw_pre_product_id: model = "usa19qw"; break;
+ case keyspan_usa19w_pre_product_id: model = "usa19w"; break;
+ case keyspan_usa28_pre_product_id: model = "usa28"; break;
+ case keyspan_usa28x_pre_product_id: model = "usa28x"; break;
+ case keyspan_usa28xa_pre_product_id: model = "usa28xa"; break;
+ case keyspan_usa28xb_pre_product_id: model = "usa28xb"; break;
+ case keyspan_usa49w_pre_product_id: model = "usa49w"; break;
+ case keyspan_usa49wlc_pre_product_id: model = "usa49wlc"; break;
default:
- record = NULL;
- fw_name = "Unknown";
- break;
+ dev_err(&serial->dev->dev, "Unknown keyspan device (%04x).\n",
+ le16_to_cpu(serial->dev->descriptor.idProduct));
+ return(1);
}
- if (record == NULL) {
- dev_err(&serial->dev->dev, "Required keyspan firmware image (%s) unavailable.\n", fw_name);
+ sprintf(fw_name, "keyspan-%s.fw", model);
+
+ if (request_firmware(&fw, fw_name, &serial->dev->dev) != 0) {
+ dev_err(&serial->dev->dev, "Required firmware image (%s) unavailable.\n", fw_name);
return(1);
}
- dbg("Uploading Keyspan %s firmware.", fw_name);
+ dbg("Uploading Keyspan %s firmware.", model);
/* download the firmware image */
response = ezusb_set_reset(serial, 1);
- while(record->address != 0xffff) {
- response = ezusb_writememory(serial, record->address,
- (unsigned char *)record->data,
- record->data_size, 0xa0);
- if (response < 0) {
- dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan"
- "firmware (%d %04X %p %d)\n",
- response,
- record->address, record->data, record->data_size);
- break;
- }
- record++;
- }
+ if (load_ihex(fw->data, fw->size, serial, keyspan_fw_load))
+ dev_err(&serial->dev->dev, "Firmware %s upload failed\n",
+ fw_name);
+
+ release_firmware(fw);
+
/* bring device out of reset. Renumeration will occur in a
moment and the new device will bind to the real driver */
response = ezusb_set_reset(serial, 0);
@@ -1418,7 +1384,7 @@ static void keyspan_setup_urbs(struct us
(serial, d_details->outcont_endpoints[i], USB_DIR_OUT,
port, p_priv->outcont_buffer, 64,
cback->outcont_callback);
- }
+ }
}
Index: linux/drivers/usb/serial/keyspan.h
===================================================================
--- linux.orig/drivers/usb/serial/keyspan.h 2005-04-05 15:08:37.000000000 -0400
+++ linux/drivers/usb/serial/keyspan.h 2005-04-05 15:21:45.000000000 -0400
@@ -99,90 +99,6 @@ static int keyspan_usa90_send_setup (st
struct usb_serial_port *port,
int reset_port);
-/* Struct used for firmware - increased size of data section
- to allow Keyspan's 'C' firmware struct to be used unmodified */
-struct ezusb_hex_record {
- __u16 address;
- __u8 data_size;
- __u8 data[64];
-};
-
-/* Conditionally include firmware images, if they aren't
- included create a null pointer instead. Current
- firmware images aren't optimised to remove duplicate
- addresses in the image itself. */
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28
- #include "keyspan_usa28_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa28_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28X
- #include "keyspan_usa28x_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa28x_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XA
- #include "keyspan_usa28xa_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa28xa_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XB
- #include "keyspan_usa28xb_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa28xb_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19
- #include "keyspan_usa19_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa19_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QI
- #include "keyspan_usa19qi_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa19qi_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_MPR
- #include "keyspan_mpr_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_mpr_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QW
- #include "keyspan_usa19qw_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa19qw_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA18X
- #include "keyspan_usa18x_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa18x_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19W
- #include "keyspan_usa19w_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa19w_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49W
- #include "keyspan_usa49w_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa49w_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49WLC
- #include "keyspan_usa49wlc_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa49wlc_firmware = NULL;
-#endif
-
/* Values used for baud rate calculation - device specific */
#define KEYSPAN_INVALID_BAUD_RATE (-1)
#define KEYSPAN_BAUD_RATE_OK (0)
Index: linux/drivers/usb/serial/Kconfig
===================================================================
--- linux.orig/drivers/usb/serial/Kconfig 2005-04-05 15:08:37.000000000 -0400
+++ linux/drivers/usb/serial/Kconfig 2005-04-05 15:21:45.000000000 -0400
@@ -239,95 +239,25 @@ config USB_SERIAL_KEYSPAN_PDA
config USB_SERIAL_KEYSPAN
tristate "USB Keyspan USA-xxx Serial Driver"
depends on USB_SERIAL
+ select IHEX_PARSER
---help---
Say Y here if you want to use Keyspan USB to serial converter
devices. This driver makes use of Keyspan's official firmware
- and was developed with their support. You must also include
- firmware to support your particular device(s).
+ and was developed with their support. It uses hotplug to load
+ the required firmware from /usr/lib/hotplug/firmware or
+ /lib/firmware.
+
+ However there really isn't a good way to get this firmware
+ since the license only allows it to be distributed as part of
+ a Linux or other Open Source operating system kernel. So you
+ will have to copy the firmware files from the kernel source
+ tree (drivers/usb/serial/*.fw) to /lib/firmware yourself.
See <http://misc.nu/hugh/keyspan.html> for more information.
To compile this driver as a module, choose M here: the
module will be called keyspan.
-config USB_SERIAL_KEYSPAN_MPR
- bool "USB Keyspan MPR Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the Keyspan MPR converter.
-
-config USB_SERIAL_KEYSPAN_USA28
- bool "USB Keyspan USA-28 Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-28 converter.
-
-config USB_SERIAL_KEYSPAN_USA28X
- bool "USB Keyspan USA-28X Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-28X converter.
- Be sure you have a USA-28X, there are also 28XA and 28XB
- models, the label underneath has the actual part number.
-
-config USB_SERIAL_KEYSPAN_USA28XA
- bool "USB Keyspan USA-28XA Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-28XA converter.
- Be sure you have a USA-28XA, there are also 28X and 28XB
- models, the label underneath has the actual part number.
-
-config USB_SERIAL_KEYSPAN_USA28XB
- bool "USB Keyspan USA-28XB Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-28XB converter.
- Be sure you have a USA-28XB, there are also 28X and 28XA
- models, the label underneath has the actual part number.
-
-config USB_SERIAL_KEYSPAN_USA19
- bool "USB Keyspan USA-19 Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-19 converter.
-
-config USB_SERIAL_KEYSPAN_USA18X
- bool "USB Keyspan USA-18X Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-18X converter.
-
-config USB_SERIAL_KEYSPAN_USA19W
- bool "USB Keyspan USA-19W Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-19W converter.
-
-config USB_SERIAL_KEYSPAN_USA19QW
- bool "USB Keyspan USA-19QW Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-19QW converter.
-
-config USB_SERIAL_KEYSPAN_USA19QI
- bool "USB Keyspan USA-19QI Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-19QI converter.
-
-config USB_SERIAL_KEYSPAN_USA49W
- bool "USB Keyspan USA-49W Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-49W converter.
-
-config USB_SERIAL_KEYSPAN_USA49WLC
- bool "USB Keyspan USA-49WLC Firmware"
- depends on USB_SERIAL_KEYSPAN
- help
- Say Y here to include firmware for the USA-49WLC converter.
-
config USB_SERIAL_KLSI
tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
