Patches 1-3 are fine.
Protocol switching via sysfs works too but if I switch from LBPS/2 to
PS/2 the device name changes from "/dev/event1" to "/dev/event2" -- is
this intended?
If I do "echo -n 50 > resolution" "0xe8 0x01" is sent. I don't know if
this is correct for "usual" PS/2-devices but for the lifebook it's
wrong.
For the lifebook the parameters are as following:
50cpi <=> 0x00
100cpi <=> 0x01
200cpi <=> 0x02
400cpi <=> 0x03
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]