jmerkey wrote:
With linux 2.6.9 running at 192 MB/S network loading and protocol
splitting drivers routing packets out of
a 2.6.9 device at full 100 mb/s (12.5 MB/S) simultaneously over 4 ports,
the adaptec starfire driver goes into
constant Tx FIFO reconfiguration mode and after 3-4 days of constantly
resetting the Tx FIFO window and
generating a deluge of messages such as:
ethX: PCI bus congestion, resetting Tx FIFO window to X bytes
pouring into the system log file at a rate of a dozen per minute. After
several days, the PCI bus totally locks up
and hangs the system. Need a config option to allow the starfire to
disable this feature. At very
high bus loading rates, the starfire card will completely lock the bus
after 3-4 days
of constant Tx FIFO reconfiguration at very high data rates with
protocol splitting and routing.
The feature doesn't need disabling; just modify the driver to stop the
flapping.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]