Some (unqualified) changes and extensions to the Kernel documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello All,

excuse me for taking your time.
I have tried to send patch below to the [email protected],
where I think it belongs more than there, but because
there has not been any reaction, I am sending it 
to whole community. I have not found who is right
target for DocBook changes in MAINTAINERS.
Please redirect me, to the right list, if you do not like
patch there.

I have recompiled Linux kernel 2.6.11.5 documentation
for me and our university students again.
The documentation could be extended for more sources
which are equipped by structured comments for recent 2.6
kernels. I have tried to proceed with that task.
I have done that more times from 2.6.0 time and it gets
boring to do same changes again and again.
Linux kernel compiles after changes for i386 and ARM targets.
I have added references to some more files into kernel-api book,
I have added some section names as well.
So please, check that changes do not break something
and that categories are not too much skewed.

I have changed kernel-doc to accept "fastcall" and "asmlinkage"
words reserved by kernel convention.
Most of the other changes are modifications in the comments to make
kernel-doc happy, accept some parameters description and do
not bail out on errors. Changed <pid> to @pid in the description,
moved some #ifdef before comments to correct function to comments
bindings, etc.

You can see result of the modified documentation build at
  http://cmp.felk.cvut.cz/~pisa/linux/lkdb-2.6.11.tar.gz

Best wishes

                Pavel Pisa
        e-mail: [email protected]
        www:    http://cmp.felk.cvut.cz/~pisa


Some more sources are ready to be included into kernel-doc
generated documentation. Sources has been added into
kernel-api for now. Some more section names added
and probably some more chaos introduced as result
of quick cleanup work.

Signed-off-by: Pavel Pisa <[email protected]>

---


diff -puN include/linux/skbuff.h~docbook-fix include/linux/skbuff.h
--- linux-2.6.11.5/include/linux/skbuff.h~docbook-fix	2005-03-27 22:19:29.000000000 +0200
+++ linux-2.6.11.5-root/include/linux/skbuff.h	2005-03-27 22:20:18.000000000 +0200
@@ -921,6 +921,7 @@ static inline void __skb_queue_purge(str
 		kfree_skb(skb);
 }
 
+#ifndef CONFIG_HAVE_ARCH_DEV_ALLOC_SKB
 /**
  *	__dev_alloc_skb - allocate an skbuff for sending
  *	@length: length to allocate
@@ -933,7 +934,6 @@ static inline void __skb_queue_purge(str
  *
  *	%NULL is returned in there is no free memory.
  */
-#ifndef CONFIG_HAVE_ARCH_DEV_ALLOC_SKB
 static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
 					      int gfp_mask)
 {
diff -puN drivers/video/fbmem.c~docbook-fix drivers/video/fbmem.c
--- linux-2.6.11.5/drivers/video/fbmem.c~docbook-fix	2005-03-27 22:21:08.000000000 +0200
+++ linux-2.6.11.5-root/drivers/video/fbmem.c	2005-03-27 22:21:52.000000000 +0200
@@ -1248,6 +1248,8 @@ int fb_get_options(char *name, char **op
 	return retval;
 }
 
+extern const char *global_mode_option;
+
 /**
  *	video_setup - process command line options
  *	@options: string of options
@@ -1262,8 +1264,6 @@ int fb_get_options(char *name, char **op
  *
  */
 
-extern const char *global_mode_option;
-
 int __init video_setup(char *options)
 {
 	int i, global = 0;
diff -puN Documentation/DocBook/kernel-api.tmpl~docbook-fix Documentation/DocBook/kernel-api.tmpl
--- linux-2.6.11.5/Documentation/DocBook/kernel-api.tmpl~docbook-fix	2005-03-27 22:22:45.000000000 +0200
+++ linux-2.6.11.5-root/Documentation/DocBook/kernel-api.tmpl	2005-03-28 12:20:44.000000000 +0200
@@ -46,13 +46,33 @@
 !Iinclude/asm-i386/unaligned.h
      </sect1>
 
-<!-- FIXME:
-  kernel/sched.c has no docs, which stuffs up the sgml.  Comment
-  out until somebody adds docs.  KAO
      <sect1><title>Delaying, scheduling, and timer routines</title>
-X!Ekernel/sched.c
+!Iinclude/linux/sched.h
+!Ekernel/sched.c
+!Ekernel/timer.c
+     </sect1>
+     <sect1><title>Internal Functions</title>
+!Ikernel/exit.c
+!Ikernel/signal.c
      </sect1>
-KAO -->
+
+     <sect1><title>Kernel objects manipulation</title>
+<!--
+X!Iinclude/linux/kobject.h
+-->
+!Elib/kobject.c
+     </sect1>
+
+     <sect1><title>Kernel utility functions</title>
+!Iinclude/linux/kernel.h
+<!-- This needs to clean up to make kernel-doc happy
+X!Ekernel/printk.c
+ -->
+!Ekernel/panic.c
+!Ekernel/sys.c
+!Ekernel/rcupdate.c
+     </sect1>
+
   </chapter>
 
   <chapter id="adt">
@@ -78,7 +98,9 @@ KAO -->
 !Elib/vsprintf.c
      </sect1>
      <sect1><title>String Manipulation</title>
-!Ilib/string.c
+<!-- All functions are exported at now
+X!Ilib/string.c
+ -->
 !Elib/string.c
      </sect1>
      <sect1><title>Bit Operations</title>
@@ -95,6 +117,25 @@ KAO -->
 !Iinclude/asm-i386/uaccess.h
 !Iarch/i386/lib/usercopy.c
      </sect1>
+     <sect1><title>More Memory Management Functions</title>
+!Iinclude/linux/rmap.h
+!Emm/readahead.c
+!Emm/filemap.c
+!Emm/memory.c
+!Emm/vmalloc.c
+!Emm/mempool.c
+!Emm/page-writeback.c
+!Emm/truncate.c
+     </sect1>
+  </chapter>
+
+
+  <chapter id="ipc">
+     <title>Kernel IPC facilities</title>
+
+     <sect1><title>IPC utilities</title>
+!Iipc/util.c
+     </sect1>
   </chapter>
 
   <chapter id="proc">
@@ -103,6 +144,10 @@ KAO -->
      <sect1><title>sysctl interface</title>
 !Ekernel/sysctl.c
      </sect1>
+
+     <sect1><title>proc filesystem interface</title>
+!Ifs/proc/base.c
+     </sect1>
   </chapter>
 
   <chapter id="debugfs">
@@ -116,6 +161,10 @@ KAO -->
 
   <chapter id="vfs">
      <title>The Linux VFS</title>
+     <sect1><title>The Filesystem types</title>
+!Iinclude/linux/fs.h
+!Einclude/linux/fs.h
+     </sect1>
      <sect1><title>The Directory Cache</title>
 !Efs/dcache.c
 !Iinclude/linux/dcache.h
@@ -131,13 +180,31 @@ KAO -->
 !Efs/locks.c
 !Ifs/locks.c
      </sect1>
+     <sect1><title>Other Functions</title>
+!Efs/mpage.c
+!Efs/namei.c
+!Efs/buffer.c
+!Efs/bio.c
+!Efs/seq_file.c
+!Efs/filesystems.c
+!Efs/fs-writeback.c
+!Efs/block_dev.c
+     </sect1>
   </chapter>
 
   <chapter id="netcore">
      <title>Linux Networking</title>
+     <sect1><title>Networking Base Types</title>
+!Iinclude/linux/net.h
+     </sect1>
      <sect1><title>Socket Buffer Functions</title>
 !Iinclude/linux/skbuff.h
+!Iinclude/net/sock.h
+!Enet/socket.c
 !Enet/core/skbuff.c
+!Enet/core/sock.c
+!Enet/core/datagram.c
+!Enet/core/stream.c
      </sect1>
      <sect1><title>Socket Filter</title>
 !Enet/core/filter.c
@@ -147,6 +214,14 @@ KAO -->
 !Enet/core/gen_stats.c
 !Enet/core/gen_estimator.c
      </sect1>
+     <sect1><title>SUN RPC subsystem</title>
+<!-- The !D functionality is not perfect, garbage has to be protected by comments
+!Dnet/sunrpc/sunrpc_syms.c
+-->
+!Enet/sunrpc/xdr.c
+!Enet/sunrpc/svcsock.c
+!Enet/sunrpc/sched.c
+     </sect1>
   </chapter>
 
   <chapter id="netdev">
@@ -183,11 +258,26 @@ X!Ekernel/module.c
 !Iarch/i386/kernel/irq.c
      </sect1>
 
+     <sect1><title>Resources Management</title>
+!Ekernel/resource.c
+     </sect1>
+
      <sect1><title>MTRR Handling</title>
 !Earch/i386/kernel/cpu/mtrr/main.c
      </sect1>
      <sect1><title>PCI Support Library</title>
 !Edrivers/pci/pci.c
+!Edrivers/pci/pci-driver.c
+!Edrivers/pci/remove.c
+!Edrivers/pci/pci-acpi.c
+<!-- kerneldoc does not understand to __devinit
+X!Edrivers/pci/search.c
+ -->
+!Edrivers/pci/msi.c
+!Edrivers/pci/bus.c
+!Edrivers/pci/hotplug.c
+!Edrivers/pci/probe.c
+!Edrivers/pci/rom.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c
@@ -212,6 +302,14 @@ X!Earch/i386/kernel/mca.c
 !Efs/devfs/base.c
   </chapter>
 
+  <chapter id="sysfs">
+     <title>The Filesystem for Exporting Kernel Objects</title>
+!Efs/sysfs/file.c
+!Efs/sysfs/dir.c
+!Efs/sysfs/symlink.c
+!Efs/sysfs/bin.c
+  </chapter>
+
   <chapter id="security">
      <title>Security Framework</title>
 !Esecurity/security.c
@@ -222,6 +320,61 @@ X!Earch/i386/kernel/mca.c
 !Ekernel/power/pm.c
   </chapter>
 
+  <chapter id="devdrivers">
+     <title>Device drivers infrastructure</title>
+     <sect1><title>Device Drivers Base</title>
+<!--
+X!Iinclude/linux/device.h
+-->
+!Edrivers/base/driver.c
+!Edrivers/base/class_simple.c
+!Edrivers/base/core.c
+!Edrivers/base/firmware_class.c
+!Edrivers/base/transport_class.c
+!Edrivers/base/dmapool.c
+<!-- Cannot be included, because
+     attribute_container_add_class_device_adapter
+ and attribute_container_classdev_to_container
+     exceed allowed 44 characters maximum
+X!Edrivers/base/attribute_container.c
+-->
+!Edrivers/base/sys.c
+<!--
+X!Edrivers/base/interface.c
+-->
+!Edrivers/base/platform.c
+!Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers Power Management</title>
+!Edrivers/base/power/main.c
+!Edrivers/base/power/resume.c
+!Edrivers/base/power/suspend.c
+     </sect1>
+     <sect1><title>Device Drivers ACPI Support</title>
+<!-- Internal functions only
+X!Edrivers/acpi/sleep/main.c
+X!Edrivers/acpi/sleep/wakeup.c
+X!Edrivers/acpi/motherboard.c
+X!Edrivers/acpi/bus.c
+-->
+!Edrivers/acpi/scan.c
+<!-- No correct structured comments
+X!Edrivers/acpi/pci_bind.c
+-->
+     </sect1>
+     <sect1><title>Device drivers PnP support</title>
+!Edrivers/pnp/core.c
+<!-- No correct structured comments
+X!Edrivers/pnp/system.c
+ -->
+!Edrivers/pnp/card.c
+!Edrivers/pnp/driver.c
+!Edrivers/pnp/manager.c
+!Edrivers/pnp/support.c
+     </sect1>
+  </chapter>
+
+
   <chapter id="blkdev">
      <title>Block Devices</title>
 !Edrivers/block/ll_rw_blk.c
@@ -239,7 +392,23 @@ X!Earch/i386/kernel/mca.c
 
   <chapter id="snddev">
      <title>Sound Devices</title>
+!Iinclude/sound/core.h
 !Esound/sound_core.c
+!Iinclude/sound/pcm.h
+!Esound/core/pcm.c
+!Esound/core/device.c
+!Esound/core/info.c
+!Esound/core/rawmidi.c
+!Esound/core/sound.c
+!Esound/core/memory.c
+!Esound/core/pcm_memory.c
+!Esound/core/init.c
+!Esound/core/isadma.c
+!Esound/core/control.c
+!Esound/core/pcm_lib.c
+!Esound/core/hwdep.c
+!Esound/core/pcm_native.c
+!Esound/core/memalloc.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Isound/sound_firmware.c
 -->
@@ -247,6 +416,7 @@ X!Isound/sound_firmware.c
 
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
+!Iinclude/linux/serial_core.h
 !Edrivers/serial/serial_core.c
 !Edrivers/serial/8250.c
   </chapter>
@@ -299,9 +469,11 @@ X!Isound/sound_firmware.c
      <sect1><title>Frame Buffer Memory</title>
 !Edrivers/video/fbmem.c
      </sect1>
+<!--
      <sect1><title>Frame Buffer Console</title>
-!Edrivers/video/console/fbcon.c
+X!Edrivers/video/console/fbcon.c
      </sect1>
+-->
      <sect1><title>Frame Buffer Colormap</title>
 !Edrivers/video/fbcmap.c
      </sect1>
diff -puN mm/vmalloc.c~docbook-fix mm/vmalloc.c
--- linux-2.6.11.5/mm/vmalloc.c~docbook-fix	2005-03-27 22:34:09.000000000 +0200
+++ linux-2.6.11.5-root/mm/vmalloc.c	2005-03-27 22:34:21.000000000 +0200
@@ -536,6 +536,10 @@ void *vmalloc(unsigned long size)
 
 EXPORT_SYMBOL(vmalloc);
 
+#ifndef PAGE_KERNEL_EXEC
+# define PAGE_KERNEL_EXEC PAGE_KERNEL
+#endif
+
 /**
  *	vmalloc_exec  -  allocate virtually contiguous, executable memory
  *
@@ -549,10 +553,6 @@ EXPORT_SYMBOL(vmalloc);
  *	use __vmalloc() instead.
  */
 
-#ifndef PAGE_KERNEL_EXEC
-# define PAGE_KERNEL_EXEC PAGE_KERNEL
-#endif
-
 void *vmalloc_exec(unsigned long size)
 {
 	return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC);
diff -puN include/linux/fs.h~docbook-fix include/linux/fs.h
--- linux-2.6.11.5/include/linux/fs.h~docbook-fix	2005-03-27 22:37:29.000000000 +0200
+++ linux-2.6.11.5-root/include/linux/fs.h	2005-03-27 22:39:04.000000000 +0200
@@ -1051,12 +1051,12 @@ static inline void file_accessed(struct 
 int sync_inode(struct inode *inode, struct writeback_control *wbc);
 
 /**
- * &export_operations - for nfsd to communicate with file systems
- * decode_fh:      decode a file handle fragment and return a &struct dentry
- * encode_fh:      encode a file handle fragment from a dentry
- * get_name:       find the name for a given inode in a given directory
- * get_parent:     find the parent of a given directory
- * get_dentry:     find a dentry for the inode given a file handle sub-fragment
+ * struct export_operations - for nfsd to communicate with file systems
+ * @decode_fh:      decode a file handle fragment and return a &struct dentry
+ * @encode_fh:      encode a file handle fragment from a dentry
+ * @get_name:       find the name for a given inode in a given directory
+ * @get_parent:     find the parent of a given directory
+ * @get_dentry:     find a dentry for the inode given a file handle sub-fragment
  *
  * Description:
  *    The export_operations structure provides a means for nfsd to communicate
diff -puN mm/page_alloc.c~docbook-fix mm/page_alloc.c
--- linux-2.6.11.5/mm/page_alloc.c~docbook-fix	2005-03-27 22:42:41.000000000 +0200
+++ linux-2.6.11.5-root/mm/page_alloc.c	2005-03-27 22:42:53.000000000 +0200
@@ -1300,8 +1300,7 @@ static int __init build_zonelists_node(p
 #define MAX_NODE_LOAD (num_online_nodes())
 static int __initdata node_load[MAX_NUMNODES];
 /**
- * find_next_best_node - find the next node that should appear in a given
- *    node's fallback list
+ * find_next_best_node - find the next node that should appear in a given node's fallback list
  * @node: node whose fallback list we're appending
  * @used_node_mask: nodemask_t of already used nodes
  *
diff -puN kernel/power/swsusp.c~docbook-fix kernel/power/swsusp.c
--- linux-2.6.11.5/kernel/power/swsusp.c~docbook-fix	2005-03-27 22:47:39.000000000 +0200
+++ linux-2.6.11.5-root/kernel/power/swsusp.c	2005-03-27 22:49:47.000000000 +0200
@@ -996,7 +996,7 @@ static int __init swsusp_pagedir_relocat
 	return check_pagedir();
 }
 
-/**
+/*
  *	Using bio to read from swap.
  *	This code requires a bit more work than just using buffer heads
  *	but, it is the recommended way for 2.5/2.6.
@@ -1138,7 +1138,7 @@ static int __init check_sig(void)
 }
 
 /**
- *	swsusp_read_data - Read image pages from swap.
+ *	read_data - Read image pages from swap.
  *
  *	You do not need to check for overlaps, check_pagedir()
  *	already did that.
diff -puN net/sunrpc/xdr.c~docbook-fix net/sunrpc/xdr.c
--- linux-2.6.11.5/net/sunrpc/xdr.c~docbook-fix	2005-03-27 23:09:40.000000000 +0200
+++ linux-2.6.11.5-root/net/sunrpc/xdr.c	2005-03-27 23:21:45.000000000 +0200
@@ -46,9 +46,9 @@ xdr_decode_netobj(u32 *p, struct xdr_net
 
 /**
  * xdr_encode_opaque_fixed - Encode fixed length opaque data
- * @p - pointer to current position in XDR buffer.
- * @ptr - pointer to data to encode (or NULL)
- * @nbytes - size of data.
+ * @p: pointer to current position in XDR buffer.
+ * @ptr: pointer to data to encode (or NULL)
+ * @nbytes: size of data.
  *
  * Copy the array of data of length nbytes at ptr to the XDR buffer
  * at position p, then align to the next 32-bit boundary by padding
@@ -76,9 +76,9 @@ EXPORT_SYMBOL(xdr_encode_opaque_fixed);
 
 /**
  * xdr_encode_opaque - Encode variable length opaque data
- * @p - pointer to current position in XDR buffer.
- * @ptr - pointer to data to encode (or NULL)
- * @nbytes - size of data.
+ * @p: pointer to current position in XDR buffer.
+ * @ptr: pointer to data to encode (or NULL)
+ * @nbytes: size of data.
  *
  * Returns the updated current XDR buffer position
  */
diff -puN net/core/sock.c~docbook-fix net/core/sock.c
--- linux-2.6.11.5/net/core/sock.c~docbook-fix	2005-03-27 23:16:12.000000000 +0200
+++ linux-2.6.11.5-root/net/core/sock.c	2005-03-27 23:20:25.000000000 +0200
@@ -607,10 +607,10 @@ static kmem_cache_t *sk_cachep;
 
 /**
  *	sk_alloc - All socket objects are allocated here
- *	@family - protocol family
- *	@priority - for allocation (%GFP_KERNEL, %GFP_ATOMIC, etc)
- *	@zero_it - zeroes the allocated sock
- *	@slab - alternate slab
+ *	@family:   protocol family
+ *	@priority: for allocation (%GFP_KERNEL, %GFP_ATOMIC, etc)
+ *	@zero_it:  zeroes the allocated sock
+ *	@slab:     alternate slab
  *
  *	All socket objects are allocated here. If @zero_it is non-zero
  *	it should have the size of the are to be zeroed, because the
@@ -962,8 +962,8 @@ static void __release_sock(struct sock *
 
 /**
  * sk_wait_data - wait for data to arrive at sk_receive_queue
- * sk - sock to wait on
- * timeo - for how long
+ * @sk:    sock to wait on
+ * @timeo: for how long
  *
  * Now socket state including sk->sk_err is changed only under lock,
  * hence we may omit checks after joining wait queue.
diff -puN net/core/datagram.c~docbook-fix net/core/datagram.c
--- linux-2.6.11.5/net/core/datagram.c~docbook-fix	2005-03-27 23:22:58.000000000 +0200
+++ linux-2.6.11.5-root/net/core/datagram.c	2005-03-27 23:23:34.000000000 +0200
@@ -115,10 +115,10 @@ out_noerr:
 
 /**
  *	skb_recv_datagram - Receive a datagram skbuff
- *	@sk - socket
- *	@flags - MSG_ flags
- *	@noblock - blocking operation?
- *	@err - error code returned
+ *	@sk: socket
+ *	@flags: MSG_ flags
+ *	@noblock: blocking operation?
+ *	@err: error code returned
  *
  *	Get a datagram skbuff, understands the peeking, nonblocking wakeups
  *	and possible races. This replaces identical code in packet, raw and
@@ -201,10 +201,10 @@ void skb_free_datagram(struct sock *sk, 
 
 /**
  *	skb_copy_datagram_iovec - Copy a datagram to an iovec.
- *	@skb - buffer to copy
- *	@offset - offset in the buffer to start copying from
- *	@iovec - io vector to copy to
- *	@len - amount of data to copy from buffer to iovec
+ *	@skb: buffer to copy
+ *	@offset: offset in the buffer to start copying from
+ *	@iovec: io vector to copy to
+ *	@len: amount of data to copy from buffer to iovec
  *
  *	Note: the iovec is modified during the copy.
  */
@@ -377,9 +377,9 @@ fault:
 
 /**
  *	skb_copy_and_csum_datagram_iovec - Copy and checkum skb to user iovec.
- *	@skb - skbuff
- *	@hlen - hardware length
- *	@iovec - io vector
+ *	@skb: skbuff
+ *	@hlen: hardware length
+ *	@iovec: io vector
  * 
  *	Caller _must_ check that skb will fit to this iovec.
  *
@@ -425,9 +425,9 @@ fault:
 
 /**
  * 	datagram_poll - generic datagram poll
- *	@file - file struct
- *	@sock - socket
- *	@wait - poll table
+ *	@file: file struct
+ *	@sock: socket
+ *	@wait: poll table
  *
  *	Datagram poll: Again totally generic. This also handles
  *	sequenced packet sockets providing the socket receive queue
diff -puN net/core/stream.c~docbook-fix net/core/stream.c
--- linux-2.6.11.5/net/core/stream.c~docbook-fix	2005-03-27 23:24:13.000000000 +0200
+++ linux-2.6.11.5-root/net/core/stream.c	2005-03-27 23:24:44.000000000 +0200
@@ -21,7 +21,7 @@
 
 /**
  * sk_stream_write_space - stream socket write_space callback.
- * sk - socket
+ * @sk: socket
  *
  * FIXME: write proper description
  */
@@ -43,8 +43,8 @@ EXPORT_SYMBOL(sk_stream_write_space);
 
 /**
  * sk_stream_wait_connect - Wait for a socket to get into the connected state
- * @sk - sock to wait on
- * @timeo_p - for how long to wait
+ * @sk: sock to wait on
+ * @timeo_p: for how long to wait
  *
  * Must be called with the socket locked.
  */
@@ -79,7 +79,7 @@ EXPORT_SYMBOL(sk_stream_wait_connect);
 
 /**
  * sk_stream_closing - Return 1 if we still have things to send in our buffers.
- * @sk - socket to verify
+ * @sk: socket to verify
  */
 static inline int sk_stream_closing(struct sock *sk)
 {
@@ -107,8 +107,8 @@ EXPORT_SYMBOL(sk_stream_wait_close);
 
 /**
  * sk_stream_wait_memory - Wait for more memory for a socket
- * @sk - socket to wait for memory
- * @timeo_p - for how long
+ * @sk: socket to wait for memory
+ * @timeo_p: for how long
  */
 int sk_stream_wait_memory(struct sock *sk, long *timeo_p)
 {
diff -puN kernel/timer.c~docbook-fix kernel/timer.c
diff -puN scripts/kernel-doc~docbook-fix scripts/kernel-doc
--- linux-2.6.11.5/scripts/kernel-doc~docbook-fix	2005-03-27 23:35:12.000000000 +0200
+++ linux-2.6.11.5-root/scripts/kernel-doc	2005-03-28 00:49:58.000000000 +0200
@@ -1465,6 +1465,8 @@ sub dump_function($$) {
 
     $prototype =~ s/^static +//;
     $prototype =~ s/^extern +//;
+    $prototype =~ s/^fastcall +//;
+    $prototype =~ s/^asmlinkage +//;
     $prototype =~ s/^inline +//;
     $prototype =~ s/^__inline__ +//;
     $prototype =~ s/^#define +//; #ak added
diff -puN drivers/acpi/pci_bind.c~docbook-fix drivers/acpi/pci_bind.c
diff -puN include/net/sock.h~docbook-fix include/net/sock.h
--- linux-2.6.11.5/include/net/sock.h~docbook-fix	2005-03-28 00:24:57.000000000 +0200
+++ linux-2.6.11.5-root/include/net/sock.h	2005-03-28 12:14:41.000000000 +0200
@@ -90,17 +90,17 @@ do {	spin_lock_init(&((__sk)->sk_lock.sl
 struct sock;
 
 /**
-  *	struct sock_common - minimal network layer representation of sockets
-  *	@skc_family - network address family
-  *	@skc_state - Connection state
-  *	@skc_reuse - %SO_REUSEADDR setting
-  *	@skc_bound_dev_if - bound device index if != 0
-  *	@skc_node - main hash linkage for various protocol lookup tables
-  *	@skc_bind_node - bind hash linkage for various protocol lookup tables
-  *	@skc_refcnt - reference count
-  *
-  *	This is the minimal network layer representation of sockets, the header
-  *	for struct sock and struct tcp_tw_bucket.
+ *	struct sock_common - minimal network layer representation of sockets
+ *	@skc_family: network address family
+ *	@skc_state: Connection state
+ *	@skc_reuse: %SO_REUSEADDR setting
+ *	@skc_bound_dev_if: bound device index if != 0
+ *	@skc_node: main hash linkage for various protocol lookup tables
+ *	@skc_bind_node: bind hash linkage for various protocol lookup tables
+ *	@skc_refcnt: reference count
+ *
+ *	This is the minimal network layer representation of sockets, the header
+ *	for struct sock and struct tcp_tw_bucket.
   */
 struct sock_common {
 	unsigned short		skc_family;
@@ -113,70 +113,70 @@ struct sock_common {
 };
 
 /**
-  *	struct sock - network layer representation of sockets
-  *	@__sk_common - shared layout with tcp_tw_bucket
-  *	@sk_zapped - ax25 & ipx means !linked
-  *	@sk_shutdown - mask of %SEND_SHUTDOWN and/or %RCV_SHUTDOWN
-  *	@sk_use_write_queue - wheter to call sk->sk_write_space in sock_wfree
-  *	@sk_userlocks - %SO_SNDBUF and %SO_RCVBUF settings
-  *	@sk_lock -	synchronizer
-  *	@sk_rcvbuf - size of receive buffer in bytes
-  *	@sk_sleep - sock wait queue
-  *	@sk_dst_cache - destination cache
-  *	@sk_dst_lock - destination cache lock
-  *	@sk_policy - flow policy
-  *	@sk_rmem_alloc - receive queue bytes committed
-  *	@sk_receive_queue - incoming packets
-  *	@sk_wmem_alloc - transmit queue bytes committed
-  *	@sk_write_queue - Packet sending queue
-  *	@sk_omem_alloc - "o" is "option" or "other"
-  *	@sk_wmem_queued - persistent queue size
-  *	@sk_forward_alloc - space allocated forward
-  *	@sk_allocation - allocation mode
-  *	@sk_sndbuf - size of send buffer in bytes
-  *	@sk_flags - %SO_LINGER (l_onoff), %SO_BROADCAST, %SO_KEEPALIVE, %SO_OOBINLINE settings
-  *	@sk_no_check - %SO_NO_CHECK setting, wether or not checkup packets
-  *	@sk_debug - %SO_DEBUG setting
-  *	@sk_rcvtstamp - %SO_TIMESTAMP setting
-  *	@sk_no_largesend - whether to sent large segments or not
-  *	@sk_route_caps - route capabilities (e.g. %NETIF_F_TSO)
-  *	@sk_lingertime - %SO_LINGER l_linger setting
-  *	@sk_hashent - hash entry in several tables (e.g. tcp_ehash)
-  *	@sk_backlog - always used with the per-socket spinlock held
-  *	@sk_callback_lock - used with the callbacks in the end of this struct
-  *	@sk_error_queue - rarely used
-  *	@sk_prot - protocol handlers inside a network family
-  *	@sk_err - last error
-  *	@sk_err_soft - errors that don't cause failure but are the cause of a persistent failure not just 'timed out'
-  *	@sk_ack_backlog - current listen backlog
-  *	@sk_max_ack_backlog - listen backlog set in listen()
-  *	@sk_priority - %SO_PRIORITY setting
-  *	@sk_type - socket type (%SOCK_STREAM, etc)
-  *	@sk_localroute - route locally only, %SO_DONTROUTE setting
-  *	@sk_protocol - which protocol this socket belongs in this network family
-  *	@sk_peercred - %SO_PEERCRED setting
-  *	@sk_rcvlowat - %SO_RCVLOWAT setting
-  *	@sk_rcvtimeo - %SO_RCVTIMEO setting
-  *	@sk_sndtimeo - %SO_SNDTIMEO setting
-  *	@sk_filter - socket filtering instructions
-  *	@sk_protinfo - private area, net family specific, when not using slab
-  *	@sk_slab - the slabcache this instance was allocated from
-  *	@sk_timer - sock cleanup timer
-  *	@sk_stamp - time stamp of last packet received
-  *	@sk_socket - Identd and reporting IO signals
-  *	@sk_user_data - RPC layer private data
-  *	@sk_owner - module that owns this socket
-  *	@sk_sndmsg_page - cached page for sendmsg
-  *	@sk_sndmsg_off - cached offset for sendmsg
-  *	@sk_send_head - front of stuff to transmit
-  *	@sk_write_pending - a write to stream socket waits to start
-  *	@sk_queue_shrunk - write queue has been shrunk recently
-  *	@sk_state_change - callback to indicate change in the state of the sock
-  *	@sk_data_ready - callback to indicate there is data to be processed
-  *	@sk_write_space - callback to indicate there is bf sending space available
-  *	@sk_error_report - callback to indicate errors (e.g. %MSG_ERRQUEUE)
-  *	@sk_backlog_rcv - callback to process the backlog
-  *	@sk_destruct - called at sock freeing time, i.e. when all refcnt == 0
+ *	struct sock - network layer representation of sockets
+ *	@__sk_common: shared layout with tcp_tw_bucket
+ *	@sk_zapped: ax25 & ipx means !linked
+ *	@sk_shutdown: mask of %SEND_SHUTDOWN and/or %RCV_SHUTDOWN
+ *	@sk_use_write_queue: wheter to call sk->sk_write_space in sock_wfree
+ *	@sk_userlocks: %SO_SNDBUF and %SO_RCVBUF settings
+ *	@sk_lock:	synchronizer
+ *	@sk_rcvbuf: size of receive buffer in bytes
+ *	@sk_sleep: sock wait queue
+ *	@sk_dst_cache: destination cache
+ *	@sk_dst_lock: destination cache lock
+ *	@sk_policy: flow policy
+ *	@sk_rmem_alloc: receive queue bytes committed
+ *	@sk_receive_queue: incoming packets
+ *	@sk_wmem_alloc: transmit queue bytes committed
+ *	@sk_write_queue: Packet sending queue
+ *	@sk_omem_alloc: "o" is "option" or "other"
+ *	@sk_wmem_queued: persistent queue size
+ *	@sk_forward_alloc: space allocated forward
+ *	@sk_allocation: allocation mode
+ *	@sk_sndbuf: size of send buffer in bytes
+ *	@sk_flags: %SO_LINGER (l_onoff), %SO_BROADCAST, %SO_KEEPALIVE, %SO_OOBINLINE settings
+ *	@sk_no_check: %SO_NO_CHECK setting, wether or not checkup packets
+ *	@sk_debug: %SO_DEBUG setting
+ *	@sk_rcvtstamp: %SO_TIMESTAMP setting
+ *	@sk_no_largesend: whether to sent large segments or not
+ *	@sk_route_caps: route capabilities (e.g. %NETIF_F_TSO)
+ *	@sk_lingertime: %SO_LINGER l_linger setting
+ *	@sk_hashent: hash entry in several tables (e.g. tcp_ehash)
+ *	@sk_backlog: always used with the per-socket spinlock held
+ *	@sk_callback_lock: used with the callbacks in the end of this struct
+ *	@sk_error_queue: rarely used
+ *	@sk_prot: protocol handlers inside a network family
+ *	@sk_err: last error
+ *	@sk_err_soft: errors that don't cause failure but are the cause of a persistent failure not just 'timed out'
+ *	@sk_ack_backlog: current listen backlog
+ *	@sk_max_ack_backlog: listen backlog set in listen()
+ *	@sk_priority: %SO_PRIORITY setting
+ *	@sk_type: socket type (%SOCK_STREAM, etc)
+ *	@sk_localroute: route locally only, %SO_DONTROUTE setting
+ *	@sk_protocol: which protocol this socket belongs in this network family
+ *	@sk_peercred: %SO_PEERCRED setting
+ *	@sk_rcvlowat: %SO_RCVLOWAT setting
+ *	@sk_rcvtimeo: %SO_RCVTIMEO setting
+ *	@sk_sndtimeo: %SO_SNDTIMEO setting
+ *	@sk_filter: socket filtering instructions
+ *	@sk_protinfo: private area, net family specific, when not using slab
+ *	@sk_slab: the slabcache this instance was allocated from
+ *	@sk_timer: sock cleanup timer
+ *	@sk_stamp: time stamp of last packet received
+ *	@sk_socket: Identd and reporting IO signals
+ *	@sk_user_data: RPC layer private data
+ *	@sk_owner: module that owns this socket
+ *	@sk_sndmsg_page: cached page for sendmsg
+ *	@sk_sndmsg_off: cached offset for sendmsg
+ *	@sk_send_head: front of stuff to transmit
+ *	@sk_write_pending: a write to stream socket waits to start
+ *	@sk_queue_shrunk: write queue has been shrunk recently
+ *	@sk_state_change: callback to indicate change in the state of the sock
+ *	@sk_data_ready: callback to indicate there is data to be processed
+ *	@sk_write_space: callback to indicate there is bf sending space available
+ *	@sk_error_report: callback to indicate errors (e.g. %MSG_ERRQUEUE)
+ *	@sk_backlog_rcv: callback to process the backlog
+ *	@sk_destruct: called at sock freeing time, i.e. when all refcnt == 0
  */
 struct sock {
 	/*
@@ -1253,8 +1253,8 @@ sock_recv_timestamp(struct msghdr *msg, 
 
 /**
  * sk_eat_skb - Release a skb if it is no longer needed
- * @sk - socket to eat this skb from
- * @skb - socket buffer to eat
+ * @sk: socket to eat this skb from
+ * @skb: socket buffer to eat
  *
  * This routine must be called with interrupts disabled or with the socket
  * locked so that the sk_buff queue operation is ok.
diff -puN include/linux/net.h~docbook-fix include/linux/net.h
--- linux-2.6.11.5/include/linux/net.h~docbook-fix	2005-03-28 00:34:12.000000000 +0200
+++ linux-2.6.11.5-root/include/linux/net.h	2005-03-28 00:36:55.000000000 +0200
@@ -63,19 +63,19 @@ typedef enum {
 #define SOCK_NOSPACE		2
 
 #ifndef ARCH_HAS_SOCKET_TYPES
-/** sock_type - Socket types
- * 
+/**
+ * enum sock_type - Socket types
+ * @SOCK_STREAM: stream (connection) socket
+ * @SOCK_DGRAM: datagram (conn.less) socket
+ * @SOCK_RAW: raw socket
+ * @SOCK_RDM: reliably-delivered message
+ * @SOCK_SEQPACKET: sequential packet socket
+ * @SOCK_PACKET: linux specific way of getting packets at the dev level.
+ *		  For writing rarp and other similar things on the user level.
+ *
  * When adding some new socket type please
  * grep ARCH_HAS_SOCKET_TYPE include/asm-* /socket.h, at least MIPS
  * overrides this enum for binary compat reasons.
- * 
- * @SOCK_STREAM - stream (connection) socket
- * @SOCK_DGRAM - datagram (conn.less) socket
- * @SOCK_RAW - raw socket
- * @SOCK_RDM - reliably-delivered message
- * @SOCK_SEQPACKET - sequential packet socket 
- * @SOCK_PACKET - linux specific way of getting packets at the dev level.
- *		  For writing rarp and other similar things on the user level.
  */
 enum sock_type {
 	SOCK_STREAM	= 1,
@@ -92,15 +92,15 @@ enum sock_type {
 
 /**
  *  struct socket - general BSD socket
- *  @state - socket state (%SS_CONNECTED, etc)
- *  @flags - socket flags (%SOCK_ASYNC_NOSPACE, etc)
- *  @ops - protocol specific socket operations
- *  @fasync_list - Asynchronous wake up list
- *  @file - File back pointer for gc
- *  @sk - internal networking protocol agnostic socket representation
- *  @wait - wait queue for several uses
- *  @type - socket type (%SOCK_STREAM, etc)
- *  @passcred - credentials (used only in Unix Sockets (aka PF_LOCAL))
+ *  @state: socket state (%SS_CONNECTED, etc)
+ *  @flags: socket flags (%SOCK_ASYNC_NOSPACE, etc)
+ *  @ops: protocol specific socket operations
+ *  @fasync_list: Asynchronous wake up list
+ *  @file: File back pointer for gc
+ *  @sk: internal networking protocol agnostic socket representation
+ *  @wait: wait queue for several uses
+ *  @type: socket type (%SOCK_STREAM, etc)
+ *  @passcred: credentials (used only in Unix Sockets (aka PF_LOCAL))
  */
 struct socket {
 	socket_state		state;
diff -puN kernel/exit.c~docbook-fix kernel/exit.c
--- linux-2.6.11.5/kernel/exit.c~docbook-fix	2005-03-28 00:48:10.000000000 +0200
+++ linux-2.6.11.5-root/kernel/exit.c	2005-03-28 00:48:13.000000000 +0200
@@ -208,7 +208,7 @@ static inline int has_stopped_jobs(int p
 }
 
 /**
- * reparent_to_init() - Reparent the calling kernel thread to the init task.
+ * reparent_to_init - Reparent the calling kernel thread to the init task.
  *
  * If a kernel thread is launched as a result of a system call, or if
  * it ever exits, it should generally reparent itself to init so that
diff -puN fs/proc/base.c~docbook-fix fs/proc/base.c
--- linux-2.6.11.5/fs/proc/base.c~docbook-fix	2005-03-28 02:42:22.000000000 +0200
+++ linux-2.6.11.5-root/fs/proc/base.c	2005-03-28 02:44:52.000000000 +0200
@@ -1607,13 +1607,13 @@ static struct inode_operations proc_self
 };
 
 /**
- * proc_pid_unhash -  Unhash /proc/<pid> entry from the dcache.
+ * proc_pid_unhash -  Unhash /proc/@pid entry from the dcache.
  * @p: task that should be flushed.
  *
- * Drops the /proc/<pid> dcache entry from the hash chains.
+ * Drops the /proc/@pid dcache entry from the hash chains.
  *
- * Dropping /proc/<pid> entries and detach_pid must be synchroneous,
- * otherwise e.g. /proc/<pid>/exe might point to the wrong executable,
+ * Dropping /proc/@pid entries and detach_pid must be synchroneous,
+ * otherwise e.g. /proc/@pid/exe might point to the wrong executable,
  * if the pid value is immediately reused. This is enforced by
  * - caller must acquire spin_lock(p->proc_lock)
  * - must be called before detach_pid()
@@ -1641,7 +1641,7 @@ struct dentry *proc_pid_unhash(struct ta
 }
 
 /**
- * proc_pid_flush - recover memory used by stale /proc/<pid>/x entries
+ * proc_pid_flush - recover memory used by stale /proc/@pid/x entries
  * @proc_entry: directoy to prune.
  *
  * Shrink the /proc directory that was used by the just killed thread.
_


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux