12_scsi_consolidate_requeue_paths.patch
Add scsi_device_unbusy() call to scsi_retry_command(), replace
scsi_queue_insert() with scsi_requeue_command(), make
scsi_softirq() use scsi_retry_command() for ADD_TO_MLQUEUE
case too (with explicit device blocking), and make
scsi_eh_flush_done_q() use scsi_retry_command(). While at it,
remove leading and tailing empty comment lines from trivial
comments.
As scsi_queue_insert() has no users now, kill it.
Signed-off-by: Tejun Heo <[email protected]>
scsi.c | 25 ++++++++++---------
scsi_error.c | 2 -
scsi_lib.c | 74 -----------------------------------------------------------
scsi_priv.h | 3 --
4 files changed, 15 insertions(+), 89 deletions(-)
Index: scsi-export/drivers/scsi/scsi.c
===================================================================
--- scsi-export.orig/drivers/scsi/scsi.c 2005-03-31 18:06:22.000000000 +0900
+++ scsi-export/drivers/scsi/scsi.c 2005-03-31 18:06:22.000000000 +0900
@@ -638,6 +638,7 @@ static void scsi_softirq(struct softirq_
while (!list_empty(&local_q)) {
struct scsi_cmnd *cmd = list_entry(local_q.next,
struct scsi_cmnd, eh_entry);
+ struct scsi_device *sdev = cmd->device;
list_del_init(&cmd->eh_entry);
disposition = scsi_decide_disposition(cmd);
@@ -646,12 +647,12 @@ static void scsi_softirq(struct softirq_
case SUCCESS:
scsi_finish_command(cmd);
break;
+ case ADD_TO_MLQUEUE:
+ sdev->device_blocked = sdev->max_device_blocked;
+ /* fall thru */
case NEEDS_RETRY:
scsi_retry_command(cmd);
break;
- case ADD_TO_MLQUEUE:
- scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
- break;
default:
if (!scsi_eh_scmd_add(cmd, 0))
scsi_finish_command(cmd);
@@ -669,20 +670,20 @@ static void scsi_softirq(struct softirq_
* level drivers should not become re-entrant as a result of
* this.
*/
-int scsi_retry_command(struct scsi_cmnd *cmd)
+void scsi_retry_command(struct scsi_cmnd *cmd)
{
- /*
- * Restore the SCSI command state.
- */
+ SCSI_LOG_MLQUEUE(1, printk("Retrying command %p\n", cmd));
+
+ scsi_device_unbusy(cmd->device);
+
+ /* Restore the SCSI command state. */
scsi_setup_cmd_retry(cmd);
- /*
- * Zero the sense information from the last time we tried
- * this command.
- */
+ /* Zero the sense information from the last time we tried
+ * this command. */
memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
- return scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
+ scsi_requeue_command(cmd, 0);
}
/*
Index: scsi-export/drivers/scsi/scsi_error.c
===================================================================
--- scsi-export.orig/drivers/scsi/scsi_error.c 2005-03-31 18:06:21.000000000 +0900
+++ scsi-export/drivers/scsi/scsi_error.c 2005-03-31 18:06:22.000000000 +0900
@@ -1551,7 +1551,7 @@ static void scsi_eh_flush_done_q(struct
" retry cmd: %p\n",
current->comm,
scmd));
- scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
+ scsi_retry_command(scmd);
} else {
if (!scmd->result)
scmd->result |= (DRIVER_TIMEOUT << 24);
Index: scsi-export/drivers/scsi/scsi_lib.c
===================================================================
--- scsi-export.orig/drivers/scsi/scsi_lib.c 2005-03-31 18:06:22.000000000 +0900
+++ scsi-export/drivers/scsi/scsi_lib.c 2005-03-31 18:06:22.000000000 +0900
@@ -210,80 +210,6 @@ int scsi_insert_special_req(struct scsi_
}
/*
- * Function: scsi_queue_insert()
- *
- * Purpose: Insert a command in the midlevel queue.
- *
- * Arguments: cmd - command that we are adding to queue.
- * reason - why we are inserting command to queue.
- *
- * Lock status: Assumed that lock is not held upon entry.
- *
- * Returns: Nothing.
- *
- * Notes: We do this for one of two cases. Either the host is busy
- * and it cannot accept any more commands for the time being,
- * or the device returned QUEUE_FULL and can accept no more
- * commands.
- * Notes: This could be called either from an interrupt context or a
- * normal process context.
- */
-int scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
-{
- struct Scsi_Host *host = cmd->device->host;
- struct scsi_device *device = cmd->device;
- struct request_queue *q = device->request_queue;
- unsigned long flags;
-
- SCSI_LOG_MLQUEUE(1,
- printk("Inserting command %p into mlqueue\n", cmd));
-
- /*
- * Next, set the appropriate busy bit for the device/host.
- *
- * If the host/device isn't busy, assume that something actually
- * completed, and that we should be able to queue a command now.
- *
- * Note that the prior mid-layer assumption that any host could
- * always queue at least one command is now broken. The mid-layer
- * will implement a user specifiable stall (see
- * scsi_host.max_host_blocked and scsi_device.max_device_blocked)
- * if a command is requeued with no other commands outstanding
- * either for the device or for the host.
- */
- if (reason == SCSI_MLQUEUE_HOST_BUSY)
- host->host_blocked = host->max_host_blocked;
- else if (reason == SCSI_MLQUEUE_DEVICE_BUSY)
- device->device_blocked = device->max_device_blocked;
-
- /*
- * Register the fact that we own the thing for now.
- */
- cmd->state = SCSI_STATE_MLQUEUE;
- cmd->owner = SCSI_OWNER_MIDLEVEL;
-
- /*
- * Decrement the counters, since these commands are no longer
- * active on the host/device.
- */
- scsi_device_unbusy(device);
-
- /*
- * Requeue the command. Turn on REQ_SOFTBARRIER to prevent
- * other requests from passing this request.
- */
- cmd->request->flags |= REQ_SOFTBARRIER;
-
- spin_lock_irqsave(q->queue_lock, flags);
- blk_requeue_request(q, cmd->request);
- spin_unlock_irqrestore(q->queue_lock, flags);
-
- scsi_run_queue(q);
-
- return 0;
-}
-
-/*
* Function: scsi_do_req
*
* Purpose: Queue a SCSI request
Index: scsi-export/drivers/scsi/scsi_priv.h
===================================================================
--- scsi-export.orig/drivers/scsi/scsi_priv.h 2005-03-31 18:06:22.000000000 +0900
+++ scsi-export/drivers/scsi/scsi_priv.h 2005-03-31 18:06:22.000000000 +0900
@@ -62,7 +62,7 @@ extern int scsi_dispatch_cmd(struct scsi
extern int scsi_setup_command_freelist(struct Scsi_Host *shost);
extern void scsi_destroy_command_freelist(struct Scsi_Host *shost);
extern void scsi_done(struct scsi_cmnd *cmd);
-extern int scsi_retry_command(struct scsi_cmnd *cmd);
+extern void scsi_retry_command(struct scsi_cmnd *cmd);
extern int scsi_insert_special_req(struct scsi_request *sreq, int);
extern void scsi_init_cmd_from_req(struct scsi_cmnd *cmd,
struct scsi_request *sreq);
@@ -95,7 +95,6 @@ extern int scsi_eh_scmd_add(struct scsi_
extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
extern void scsi_setup_cmd_retry(struct scsi_cmnd *cmd);
extern void scsi_device_unbusy(struct scsi_device *sdev);
-extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
extern void scsi_requeue_command(struct scsi_cmnd *cmd, int reprep);
extern void scsi_next_command(struct scsi_cmnd *cmd);
extern void scsi_run_host_queues(struct Scsi_Host *shost);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
