HELP: PC104 IO card driver Problem

[nobin matthew <nobin_matthew@yahoo.com>]

Dear Friends,

Can anybody Help me in this Pc104 driver Problem;
What is the basics steps in doing read and write on
Pc104 cards.

Deatails Given Below:
              I am writing a Linux device driver for
Diamond systems
IR104 digital IO card. This is a PC104 bus device(that
means it ISA
bus compatible).
The Platform is Arcom Viper borad(with support for
PC104), This is a
Xscale, Little endian Platform.

The Specification of PC104 interface  given in Viper
borad manual is:
0x3C000000-0x3CFFFFFF PC/104 memory space(16MB)
0x30000000-0x300003FF PC/104 IO space(1KB)

Specification given in IR104 manual is:
I made the jumber setting so that, the IO space
addresses  taken by 8
registers will be 0x300-0x307

The driver should do read and write on this
registers(character device
driver).

I took two approaches one is:
i added IO space and 0x300, did inb() and oub().(IO
space base address
and 0x300)
otherway i did ioremap on added result, did inb() and
oub().

In the second method:
I did same procedures using IO memory space

both methods are giving errors, i think that is
related to paging. i think
there is a need for disabling paging in this space.

Please help regarding this. How to solve this.

Nobin Mathew



		
__________________________________ 
Do you Yahoo!? 
Take Yahoo! Mail with you! Get it on your mobile phone. 
http://mobile.yahoo.com/maildemo 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/