Re: [ACPI] 2.6.12-rc1-mm[1-3]: ACPI battery monitor does not work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 29 March 2005 17:56, Rafael J. Wysocki wrote:
> Hi,
>
> There is a problem on my box (Asus L5D, x86-64 kernel) with the ACPI
> battery driver in the 2.6.12-rc1-mm[1-3] kernels.  Namely, the battery
> monitor that I use (the kpowersave applet from SUSE 9.2) is no longer able
> to report the battery status (ie how much % it is loaded).  It can only
> check if the AC power is connected (if it is connected, kpowersave behaves
> as though there was no battery in the box, and if it is not connected,
> kpowersave always shows that the battery is 1% loaded).
>
> Also, there are big latencies on loading and accessing the battery module,
> but the module loads successfully and there's nothing suspicious in dmesg.
>
> Please let me know if you need any additional information.
>
> Greets,
> Rafael

Could you just revert ec-mode patch, then retest? 
-- 
Thanks,
Luming
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux