Hi,
I made a patch to update m32r_sio driver.
Compile checked and tested on a M32700UT eva board with SMP kernel.
It looks working...
Could you please accept the following patch?
Thanks,
-- Takata
From: Russell King <[email protected]>
Date: Sat, 19 Mar 2005 17:21:01 +0000
> m32r_sio
> --------
>
> Maintainer: Hirokazu Takata
>
> Please clean up the m32r_sio driver, removing whatever bits of code
> aren't absolutely necessary.
>
> Specifically, I'd like to see the following addressed:
>
> - the usage of SERIAL_IO_HUB6
> (this driver doesn't support hub6 cards)
> - SERIAL_IO_* should be UPIO_*
> - __register_m32r_sio, register_m32r_sio, unregister_m32r_sio,
> m32r_sio_get_irq_map
> (this driver doesn't support PCMCIA cards, all of which are based on
> 8250-compatible devices.)
__register_m32r_sio, register_m32r_sio, unregister_m32r_sio are
still remained. I'm going to take a look them after.
> - early_serial_setup
> (should we really have the function name duplicated across different
> hardware drivers?)
>
Signed-off-by: Hirokazu Takata <[email protected]>
---
drivers/serial/m32r_sio.c | 156 ++++++++--------------------------
drivers/serial/m32r_sio.h | 1
drivers/serial/m32r_sio_reg.h | 190 ------------------------------------------
include/asm-m32r/serial.h | 142 ++++---------------------------
include/linux/serial_core.h | 3
5 files changed, 59 insertions(+), 433 deletions(-)
diff -ruNp a/include/linux/serial_core.h b/include/linux/serial_core.h
--- a/include/linux/serial_core.h 2005-03-24 14:02:31.000000000 +0900
+++ b/include/linux/serial_core.h 2005-03-24 14:50:23.000000000 +0900
@@ -113,6 +113,9 @@
/* Samsung S3C2400 SoC */
#define PORT_S3C2400 67
+/* M32R SIO */
+#define PORT_M32R_SIO 68
+
#ifdef __KERNEL__
#include <linux/config.h>
diff -ruNp a/include/asm-m32r/serial.h b/include/asm-m32r/serial.h
--- a/include/asm-m32r/serial.h 2004-12-25 06:35:40.000000000 +0900
+++ b/include/asm-m32r/serial.h 2005-03-24 17:25:05.812651363 +0900
@@ -1,10 +1,6 @@
#ifndef _ASM_M32R_SERIAL_H
#define _ASM_M32R_SERIAL_H
-/* $Id$ */
-
-/* orig : i386 2.4.18 */
-
/*
* include/asm-m32r/serial.h
*/
@@ -21,131 +17,31 @@
*/
#define BASE_BAUD ( 1843200 / 16 )
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
+/* Standard COM flags */
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#define RS_TABLE_SIZE 64
-#else
-#define RS_TABLE_SIZE
-#endif
-
-#define MCA_COM_FLAGS (STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+/* Standard PORT definitions */
+#if defined(CONFIG_PLAT_USRV)
-#define STD_SERIAL_PORT_DEFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
- { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
- { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS \
- { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \
- { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \
- { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \
- { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \
- { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \
- { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \
- { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \
- { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \
- { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \
- { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \
- { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \
- { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \
- { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \
- { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \
- { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \
- { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \
- { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \
- { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \
- { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \
- { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \
- { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \
- { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \
- { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \
- { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \
- { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \
- { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \
- { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \
- { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */
+#define STD_SERIAL_PORT_DEFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
+
+#else /* !CONFIG_PLAT_USRV */
+
+#if defined(CONFIG_SERIAL_M32R_PLDSIO)
+#define STD_SERIAL_PORT_DEFNS \
+ { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \
+ STD_COM_FLAGS }, /* ttyS0 */
#else
-#define EXTRA_SERIAL_PORT_DEFNS
+#define STD_SERIAL_PORT_DEFNS \
+ { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \
+ STD_COM_FLAGS }, /* ttyS0 */
#endif
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \
- { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#ifdef CONFIG_MCA
-#define MCA_SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS }, \
- { 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
-#else
-#define MCA_SERIAL_PORT_DFNS
-#endif
+#endif /* !CONFIG_PLAT_USRV */
-#ifndef CONFIG_PLAT_USRV
-#define SERIAL_PORT_DFNS \
- STD_SERIAL_PORT_DEFNS \
- EXTRA_SERIAL_PORT_DEFNS \
- HUB6_SERIAL_PORT_DFNS \
- MCA_SERIAL_PORT_DFNS
-
-#else /* CONFIG_PLAT_USRV */
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
-#endif /* CONFIG_PLAT_USRV */
+#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
#endif /* _ASM_M32R_SERIAL_H */
diff -ruNp a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
--- a/drivers/serial/m32r_sio.c 2005-03-24 13:40:18.000000000 +0900
+++ b/drivers/serial/m32r_sio.c 2005-03-24 17:37:23.362805402 +0900
@@ -26,6 +26,11 @@
* serial.c driver, and is currently the preferred form.
*/
#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
@@ -40,12 +45,8 @@
#include <asm/io.h>
#include <asm/irq.h>
-#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#define PORT_SIO 1
-#define PORT_MAX_SIO 1
+#define PORT_M32R_BASE PORT_M32R_SIO
+#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1)
#define BAUD_RATE 115200
#include <linux/serial_core.h>
@@ -83,44 +84,20 @@ unsigned int share_irqs_sio = M32R_SIO_S
*/
#define is_real_interrupt(irq) ((irq) != 0)
-/*
- * This converts from our new CONFIG_ symbols to the symbols
- * that asm/serial.h expects. You _NEED_ to comment out the
- * linux/config.h include contained inside asm/serial.h for
- * this to work.
- */
-#undef CONFIG_SERIAL_MANY_PORTS
-#undef CONFIG_SERIAL_DETECT_IRQ
-#undef CONFIG_SERIAL_MULTIPORT
-#undef CONFIG_HUB6
-
-#ifdef CONFIG_SERIAL_M32R_SIO_DETECT_IRQ
-#define CONFIG_SERIAL_DETECT_IRQ 1
-#endif
-#ifdef CONFIG_SERIAL_M32R_SIO_MULTIPORT
-#define CONFIG_SERIAL_MULTIPORT 1
-#endif
-#ifdef CONFIG_SERIAL_M32R_SIO_MANY_PORTS
-#define CONFIG_SERIAL_MANY_PORTS 1
-#endif
+#include <asm/serial.h>
/*
- * HUB6 is always on. This will be removed once the header
- * files have been cleaned.
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
*/
-#define CONFIG_HUB6 1
-
-#include <asm/serial.h>
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
static struct old_serial_port old_serial_port[] = {
- { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, STD_COM_FLAGS },
+ SERIAL_PORT_DFNS /* defined in asm/serial.h */
};
-#else
-static struct old_serial_port old_serial_port[] = {
- { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, STD_COM_FLAGS },
-};
-#endif
#define UART_NR ARRAY_SIZE(old_serial_port)
@@ -153,9 +130,17 @@ static struct irq_info irq_lists[NR_IRQS
/*
* Here we define the default xmit fifo size used for each type of UART.
*/
-static const struct serial_uart_config uart_config[PORT_MAX_SIO+1] = {
- { "unknown", 1, 0 },
- { "M32RSIO", 1, 0 }
+static const struct serial_uart_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .dfl_xmit_fifo_size = 1,
+ .flags = 0,
+ },
+ [PORT_INDEX(PORT_M32R_SIO)] = {
+ .name = "M32RSIO",
+ .dfl_xmit_fifo_size = 1,
+ .flags = 0,
+ },
};
#ifdef CONFIG_SERIAL_M32R_PLDSIO
@@ -460,7 +445,6 @@ static inline void m32r_sio_handle_port(
if (status & 0x04)
receive_chars(up, &status, regs);
- // check_modem_status(up);
if (status & 0x01)
transmit_chars(up);
}
@@ -842,13 +826,12 @@ m32r_sio_request_std_resource(struct uar
int ret = 0;
switch (up->port.iotype) {
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
if (up->port.mapbase) {
#ifdef CONFIG_SERIAL_M32R_PLDSIO
*res = request_mem_region(up->port.mapbase, size, "serial");
#else
start = up->port.mapbase;
- start += UART_RSA_BASE << up->port.regshift;
*res = request_mem_region(start, size, "serial");
#endif
if (!*res)
@@ -856,8 +839,7 @@ m32r_sio_request_std_resource(struct uar
}
break;
- case SERIAL_IO_HUB6:
- case SERIAL_IO_PORT:
+ case UPIO_PORT:
*res = request_region(up->port.iobase, size, "serial");
if (!*res)
ret = -EBUSY;
@@ -866,55 +848,15 @@ m32r_sio_request_std_resource(struct uar
return ret;
}
-static int
-m32r_sio_request_rsa_resource(struct uart_sio_port *up, struct resource **res)
-{
- unsigned int size = 8 << up->port.regshift;
- unsigned long start;
- int ret = 0;
-
- switch (up->port.iotype) {
- case SERIAL_IO_MEM:
- if (up->port.mapbase) {
- start = up->port.mapbase;
- start += UART_RSA_BASE << up->port.regshift;
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
- *res = request_mem_region(start, size, "serial-rsa");
-#else
- *res = request_mem_region(up->port.mapbase, size, "serial-rsa");
-#endif
- if (!*res)
- ret = -EBUSY;
- }
- break;
-
- case SERIAL_IO_HUB6:
- case SERIAL_IO_PORT:
- start = up->port.iobase;
- start += UART_RSA_BASE << up->port.regshift;
- *res = request_region(up->port.iobase, size, "serial-rsa");
- if (!*res)
- ret = -EBUSY;
- break;
- }
-
- return ret;
-}
-
static void m32r_sio_release_port(struct uart_port *port)
{
struct uart_sio_port *up = (struct uart_sio_port *)port;
unsigned long start, offset = 0, size = 0;
- if (up->port.type == PORT_RSA) {
- offset = UART_RSA_BASE << up->port.regshift;
- size = 8;
- }
-
size <<= up->port.regshift;
switch (up->port.iotype) {
- case SERIAL_IO_MEM:
+ case UPIO_MEM:
if (up->port.mapbase) {
/*
* Unmap the area.
@@ -930,8 +872,7 @@ static void m32r_sio_release_port(struct
}
break;
- case SERIAL_IO_HUB6:
- case SERIAL_IO_PORT:
+ case UPIO_PORT:
start = up->port.iobase;
if (size)
@@ -947,14 +888,9 @@ static void m32r_sio_release_port(struct
static int m32r_sio_request_port(struct uart_port *port)
{
struct uart_sio_port *up = (struct uart_sio_port *)port;
- struct resource *res = NULL, *res_rsa = NULL;
+ struct resource *res = NULL;
int ret = 0;
- if (up->port.type == PORT_RSA){
- ret = m32r_sio_request_rsa_resource(up, &res_rsa);
- if (ret < 0)
- return ret;
- }
ret = m32r_sio_request_std_resource(up, &res);
/*
@@ -969,11 +905,10 @@ static int m32r_sio_request_port(struct
}
if (ret < 0) {
- if (res_rsa)
- release_resource(res_rsa);
if (res)
release_resource(res);
}
+
return ret;
}
@@ -983,7 +918,7 @@ static void m32r_sio_config_port(struct
spin_lock_irqsave(&up->port.lock, flags);
- up->port.type = PORT_SIO;
+ up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
spin_unlock_irqrestore(&up->port.lock, flags);
@@ -994,8 +929,7 @@ m32r_sio_verify_port(struct uart_port *p
{
if (ser->irq >= NR_IRQS || ser->irq < 0 ||
ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
- ser->type > PORT_MAX_SIO || ser->type == PORT_CIRRUS ||
- ser->type == PORT_STARTECH)
+ ser->type >= ARRAY_SIZE(uart_config))
return -EINVAL;
return 0;
}
@@ -1048,7 +982,6 @@ static void __init m32r_sio_isa_init_por
up->port.irq = irq_canonicalize(old_serial_port[i].irq);
up->port.uartclk = old_serial_port[i].baud_base * 16;
up->port.flags = old_serial_port[i].flags;
- up->port.hub6 = old_serial_port[i].hub6;
up->port.membase = old_serial_port[i].iomem_base;
up->port.iotype = old_serial_port[i].io_type;
up->port.regshift = old_serial_port[i].iomem_reg_shift;
@@ -1255,7 +1188,7 @@ static int __register_m32r_sio(struct se
}
/**
- * register_serial - configure a 16x50 serial port at runtime
+ * register_m32r_sio - configure a 16x50 serial port at runtime
* @req: request structure
*
* Configure the serial port specified by the request. If the
@@ -1272,7 +1205,7 @@ int register_m32r_sio(struct serial_stru
return __register_m32r_sio(req, -1);
}
-int __init early_m32r_sio_setup(struct uart_port *port)
+int __init early_serial_setup(struct uart_port *port)
{
m32r_sio_isa_init_ports();
m32r_sio_ports[port->line].port = *port;
@@ -1282,7 +1215,7 @@ int __init early_m32r_sio_setup(struct u
}
/**
- * unregister_serial - remove a 16x50 serial port at runtime
+ * unregister_m32r_sio - remove a 16x50 serial port at runtime
* @line: serial line number
*
* Remove one serial port. This may be called from interrupt
@@ -1293,20 +1226,6 @@ void unregister_m32r_sio(int line)
uart_unregister_port(&m32r_sio_reg, line);
}
-/*
- * This is for ISAPNP only.
- */
-void m32r_sio_get_irq_map(unsigned int *map)
-{
- int i;
-
- for (i = 0; i < UART_NR; i++) {
- if (m32r_sio_ports[i].port.type != PORT_UNKNOWN &&
- m32r_sio_ports[i].port.irq < 16)
- *map |= 1 << m32r_sio_ports[i].port.irq;
- }
-}
-
/**
* m32r_sio_suspend_port - suspend one serial port
* @line: serial line number
@@ -1361,7 +1280,6 @@ module_exit(m32r_sio_exit);
EXPORT_SYMBOL(register_m32r_sio);
EXPORT_SYMBOL(unregister_m32r_sio);
-EXPORT_SYMBOL(m32r_sio_get_irq_map);
EXPORT_SYMBOL(m32r_sio_suspend_port);
EXPORT_SYMBOL(m32r_sio_resume_port);
diff -ruNp a/drivers/serial/m32r_sio.h b/drivers/serial/m32r_sio.h
--- a/drivers/serial/m32r_sio.h 2004-12-25 06:34:45.000000000 +0900
+++ b/drivers/serial/m32r_sio.h 2005-03-24 17:26:05.369897419 +0900
@@ -36,7 +36,6 @@ struct old_serial_port {
unsigned int port;
unsigned int irq;
unsigned int flags;
- unsigned char hub6;
unsigned char io_type;
unsigned char *iomem_base;
unsigned short iomem_reg_shift;
diff -ruNp a/drivers/serial/m32r_sio_reg.h b/drivers/serial/m32r_sio_reg.h
--- a/drivers/serial/m32r_sio_reg.h 2004-12-25 06:34:30.000000000 +0900
+++ b/drivers/serial/m32r_sio_reg.h 2005-03-24 17:46:08.994486238 +0900
@@ -104,31 +104,6 @@
#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
/*
- * These are the definitions for the FIFO Control Register
- * (16650 only)
- */
-#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
-#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
-#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
-#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
-#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
-#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
-#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
-/* 16650 redefinitions */
-#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
-#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
-#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
-#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
-#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
-#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
-#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
-#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
-/* TI 16750 definitions */
-#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode */
-
-/*
* These are the definitions for the Line Control Register
*
* Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
@@ -174,170 +149,5 @@
#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */
#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */
#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */
-/*
- * Sleep mode for ST16650 and TI16750.
- * Note that for 16650, EFR-bit 4 must be selected as well.
- */
-#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
-
-/*
- * These are the definitions for the Modem Control Register
- */
-#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-#define UART_MCR_OUT2 0x08 /* Out2 complement */
-#define UART_MCR_OUT1 0x04 /* Out1 complement */
-#define UART_MCR_RTS 0x02 /* RTS complement */
-#define UART_MCR_DTR 0x01 /* DTR complement */
-
-/*
- * These are the definitions for the Modem Status Register
- */
-#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
-#define UART_MSR_RI 0x40 /* Ring Indicator */
-#define UART_MSR_DSR 0x20 /* Data Set Ready */
-#define UART_MSR_CTS 0x10 /* Clear to Send */
-#define UART_MSR_DDCD 0x08 /* Delta DCD */
-#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
-#define UART_MSR_DDSR 0x02 /* Delta DSR */
-#define UART_MSR_DCTS 0x01 /* Delta CTS */
-#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-
-/*
- * These are the definitions for the Extended Features Register
- * (StarTech 16C660 only, when DLAB=1)
- */
-#define UART_EFR_CTS 0x80 /* CTS flow control */
-#define UART_EFR_RTS 0x40 /* RTS flow control */
-#define UART_EFR_SCD 0x20 /* Special character detect */
-#define UART_EFR_ECB 0x10 /* Enhanced control bit */
-/*
- * the low four bits control software flow control
- */
-
-/*
- * These register definitions are for the 16C950
- */
-#define UART_ASR 0x01 /* Additional Status Register */
-#define UART_RFL 0x03 /* Receiver FIFO level */
-#define UART_TFL 0x04 /* Transmitter FIFO level */
-#define UART_ICR 0x05 /* Index Control Register */
-
-/* The 16950 ICR registers */
-#define UART_ACR 0x00 /* Additional Control Register */
-#define UART_CPR 0x01 /* Clock Prescalar Register */
-#define UART_TCR 0x02 /* Times Clock Register */
-#define UART_CKS 0x03 /* Clock Select Register */
-#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */
-#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */
-#define UART_FCL 0x06 /* Flow Control Level Lower */
-#define UART_FCH 0x07 /* Flow Control Level Higher */
-#define UART_ID1 0x08 /* ID #1 */
-#define UART_ID2 0x09 /* ID #2 */
-#define UART_ID3 0x0A /* ID #3 */
-#define UART_REV 0x0B /* Revision */
-#define UART_CSR 0x0C /* Channel Software Reset */
-#define UART_NMR 0x0D /* Nine-bit Mode Register */
-#define UART_CTR 0xFF
-
-/*
- * The 16C950 Additional Control Reigster
- */
-#define UART_ACR_RXDIS 0x01 /* Receiver disable */
-#define UART_ACR_TXDIS 0x02 /* Receiver disable */
-#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
-#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
-#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
-#define UART_ACR_ASREN 0x80 /* Additional status enable */
-
-/*
- * These are the definitions for the Feature Control Register
- * (XR16C85x only, when LCR=bf; doubles with the Interrupt Enable
- * Register, UART register #1)
- */
-#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */
-#define UART_FCTR_RTS_4DELAY 0x01
-#define UART_FCTR_RTS_6DELAY 0x02
-#define UART_FCTR_RTS_8DELAY 0x03
-#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */
-#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */
-#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */
-#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */
-#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */
-#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */
-#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */
-#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */
-#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */
-
-/*
- * These are the definitions for the Enhanced Mode Select Register
- * (XR16C85x only, when LCR=bf and FCTR bit 6=1; doubles with the
- * Scratch register, UART register #7)
- */
-#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */
-#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */
-
-/*
- * These are the definitions for the Programmable Trigger
- * Register (XR16C85x only, when LCR=bf; doubles with the UART RX/TX
- * register, UART register #0)
- */
-#define UART_TRG_1 0x01
-#define UART_TRG_4 0x04
-#define UART_TRG_8 0x08
-#define UART_TRG_16 0x10
-#define UART_TRG_32 0x20
-#define UART_TRG_64 0x40
-#define UART_TRG_96 0x60
-#define UART_TRG_120 0x78
-#define UART_TRG_128 0x80
-
-/*
- * These definitions are for the RSA-DV II/S card, from
- *
- * Kiyokazu SUTO <[email protected]>
- */
-
-#define UART_RSA_BASE (-8)
-
-#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
-
-#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
-#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
-#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
-#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
-
-#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
-
-#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
-#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
-#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
-#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
-#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
-
-#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
-
-#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
-#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
-#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
-#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
-#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
-#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
-#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
-#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
-
-#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
-
-#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
-
-#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
-
-#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
-
-/*
- * The RSA DSV/II board has two fixed clock frequencies. One is the
- * standard rate, and the other is 8 times faster.
- */
-#define SERIAL_RSA_BAUD_BASE (921600)
-#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
#endif /* _M32R_SIO_REG_H */
--
Hirokazu Takata <[email protected]>
Linux/M32R Project: http://www.linux-m32r.org/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
