I was previously running 2.6.11-rc3 and swsusp was working quite nicely:
echo shutdown > /sys/power/disk
echo disk > /sys/power/state
Now I've upgraded to 2.6.12-rc1, 423b66b6oJOGN68OhmSrBFxxLOtIEA, and it
no longer works reliably. Almost every time I do the above it blocks in
device_resume() (I haven't had time to track it deeper than that).
Here's the output (hand copied):
[ 51.782593] [nosave pfn 0x356]<7>[nosave pfn 0x357]swsusp:critical section/: done (122772 pages copied)
[ 54.305996] PM: writing image.
[ 54.306032] /usr/src/linux-2.6-cvs/kernel/power/swsusp.c:863
[ 54.316885] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
_
(Obviously, I added some printks to track where it's blocking.)
Dmesg is attached; hardware is a Vaio r505te.
Unfortunately, the deadlock (?) is nondeterministic; it *sometimes*
suspends successfully, maybe one time out of 10. And thinking back, I
*sometimes* saw failures to suspend with 2.6.11-rc3, maybe one failure
out of 20 suspends.
Another interesting tidbit - I had more success when I tried it without
the intel_agp module loaded; I haven't seen a lockup yet. (But why
can't I rmmod intel_agp?)
-andy
[4294667.296000] Linux version 2.6.12-rc1 (adi@sart) (gcc version 3.3.4 (Debian 1:3.3.4-9ubuntu5)) #7 Tue Mar 22 21:30:45 PST 2005
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[4294667.296000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
[4294667.296000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 0000000013cf0000 (usable)
[4294667.296000] BIOS-e820: 0000000013cf0000 - 0000000013cfc000 (ACPI data)
[4294667.296000] BIOS-e820: 0000000013cfc000 - 0000000013d00000 (ACPI NVS)
[4294667.296000] BIOS-e820: 0000000013d00000 - 0000000013e80000 (usable)
[4294667.296000] BIOS-e820: 0000000013e80000 - 0000000014000000 (reserved)
[4294667.296000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[4294667.296000] 318MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 81536
[4294667.296000] DMA zone: 4096 pages, LIFO batch:1
[4294667.296000] Normal zone: 77440 pages, LIFO batch:16
[4294667.296000] HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI present.
[4294667.296000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7120
[4294667.296000] ACPI: RSDT (v001 SONY U1 0x20010312 PTL 0x00000000) @ 0x13cf74cb
[4294667.296000] ACPI: FADT (v001 SONY U1 0x20010312 PTL 0x01000000) @ 0x13cfbf64
[4294667.296000] ACPI: BOOT (v001 SONY U1 0x20010312 PTL 0x00000001) @ 0x13cfbfd8
[4294667.296000] ACPI: DSDT (v001 SONY U1 0x20010312 PTL 0x0100000b) @ 0x00000000
[4294667.296000] Allocating PCI resources starting at 14000000 (gap: 14000000:eb800000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda2 ro
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (0127f000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[ 0.000000] Detected 596.225 MHz processor.
[ 15.409585] Using tsc for high-res timesource
[ 15.411373] Console: colour VGA+ 80x25
[ 15.413032] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.414428] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.451391] Memory: 319764k/326144k available (1648k kernel code, 5748k reserved, 769k data, 156k init, 0k highmem)
[ 15.451466] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.451721] Calibrating delay loop... 1175.55 BogoMIPS (lpj=587776)
[ 15.472329] Security Framework v1.0.0 initialized
[ 15.472403] Mount-cache hash table entries: 512
[ 15.472701] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 15.472723] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 15.472748] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 15.472790] CPU: L2 cache: 256K
[ 15.472823] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 15.472840] CPU: Intel Pentium III (Coppermine) stepping 06
[ 15.472895] Enabling fast FPU save and restore... done.
[ 15.472937] Enabling unmasked SIMD FPU exception support... done.
[ 15.472986] Checking 'hlt' instruction... OK.
[ 15.516484] ACPI: setting ELCR to 0200 (from 0628)
[ 15.552288] NET: Registered protocol family 16
[ 15.553529] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1
[ 15.553588] PCI: Using configuration type 1
[ 15.553626] mtrr: v2.0 (20020519)
[ 15.554600] ACPI: Subsystem revision 20050211
[ 15.593476] ACPI: Interpreter enabled
[ 15.593531] ACPI: Using PIC for interrupt routing
[ 15.597099] ACPI: PCI Root Bridge [PCI0] (00:00)
[ 15.597142] PCI: Probing PCI hardware (bus 00)
[ 15.598428] PCI: Transparent bridge - 0000:00:1e.0
[ 15.599531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.600509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 15.604310] ACPI: Embedded Controller [EC0] (gpe 28)
[ 15.647350] ACPI: PCI Interrupt Link [LNKA] (IRQs 9) *0
[ 15.648458] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0
[ 15.649416] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
[ 15.650495] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[ 15.651565] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[ 15.652638] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0
[ 15.653325] PCI: Using ACPI for IRQ routing
[ 15.653369] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.659519] Simple Boot Flag at 0x36 set to 0x1
[ 15.660688] VFS: Disk quotas dquot_6.5.1
[ 15.660777] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.660920] devfs: 2004-01-31 Richard Gooch ([email protected])
[ 15.660970] devfs: boot_options: 0x0
[ 15.661069] Initializing Cryptographic API
[ 15.662644] ACPI: AC Adapter [ACAD] (off-line)
[ 15.667594] ACPI: Battery Slot [BAT1] (battery present)
[ 15.667664] ACPI: Lid Switch [LID]
[ 15.667730] ACPI: Power Button (CM) [PWRB]
[ 15.700520] ACPI: Video Device [GCH0] (multi-head: yes rom: yes post: no)
[ 15.701009] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 15.701064] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 15.707046] ACPI: Thermal Zone [ATF0] (34 C)
[ 15.713858] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 15.714069] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.714109] io scheduler noop registered
[ 15.714175] io scheduler anticipatory registered
[ 15.714224] io scheduler deadline registered
[ 15.714298] io scheduler cfq registered
[ 15.715472] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 15.715660] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 15.715708] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 15.715974] ICH2M: IDE controller at PCI slot 0000:00:1f.1
[ 15.716039] ICH2M: chipset revision 3
[ 15.716073] ICH2M: not 100% native mode: will probe irqs later
[ 15.716128] ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
[ 15.716218] Probing IDE interface ide0...
[ 15.738423] hda: TOSHIBA MK4026GAX, ATA DISK drive
[ 15.751123] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 15.751512] Probing IDE interface ide1...
[ 15.762838] Probing IDE interface ide2...
[ 15.783945] Probing IDE interface ide3...
[ 15.795219] Probing IDE interface ide4...
[ 15.816326] Probing IDE interface ide5...
[ 15.837538] hda: max request size: 128KiB
[ 15.848237] hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
[ 15.848356] hda: cache flushes supported
[ 15.848565] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
[ 15.855880] mice: PS/2 mouse device common for all mice
[ 15.855997] NET: Registered protocol family 2
[ 15.857032] IP: routing cache hash table of 2048 buckets, 16Kbytes
[ 15.857508] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 15.858088] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 15.858415] TCP: Hash tables configured (established 16384 bind 16384)
[ 15.858737] NET: Registered protocol family 8
[ 15.858786] NET: Registered protocol family 20
[ 15.858924] PM: Checking swsusp image.
[ 15.859289] swsusp: Resume From Partition /dev/hda3
[ 15.877786] input: AT Translated Set 2 keyboard on isa0060/serio0
[ 15.885595] <3>swsusp: Suspend partition has wrong signature?
[ 15.885690] swsusp: Error -22 check for resume file
[ 15.885697] PM: Resume from disk failed.
[ 15.885743] ACPI wakeup devices:
[ 15.885793] PWRB LAN CRD0 EC0 COMA USB1 USB2 MODE
[ 15.885869] ACPI: (supports S0 S3 S4 S5)
[ 15.888624] kjournald starting. Commit interval 5 seconds
[ 15.888688] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.888807] VFS: Mounted root (ext3 filesystem) readonly.
[ 15.889516] Freeing unused kernel memory: 156k freed
[ 16.141642] NET: Registered protocol family 1
[ 19.215308] Adding 987988k swap on /dev/hda3. Priority:-1 extents:1
[ 19.290971] EXT3 FS on hda2, internal journal
[ 22.577701] SCSI subsystem initialized
[ 23.111022] Enabling hardware tapping
[ 23.144426] input: PS/2 Mouse on isa0060/serio1
[ 23.450887] input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
[ 23.542008] ieee1394: Initialized config rom entry `ip1394'
[ 24.513902] sbp2: $Rev: 1219 $ Ben Collins <[email protected]>
[ 25.341803] kjournald starting. Commit interval 5 seconds
[ 25.341959] EXT3 FS on hda1, internal journal
[ 25.342007] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.246274] Linux Kernel Card Services
[ 28.246343] options: [pci] [cardbus] [pm]
[ 28.436545] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 28.436608] PCI: setting IRQ 9 as level-triggered
[ 28.436647] ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 9 (level, low) -> IRQ 9
[ 28.436724] Yenta: CardBus bridge found at 0000:01:02.0 [104d:80e0]
[ 28.556726] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[ 28.556764] Socket status: 30000006
[ 30.159387] NET: Registered protocol family 10
[ 30.159768] Disabled Privacy Extensions on device c032ea20(lo)
[ 30.160046] IPv6 over IPv4 tunneling driver
[ 34.058359] Linux agpgart interface v0.101 (c) Dave Jones
[ 34.148385] agpgart: Detected an Intel i815 Chipset.
[ 34.204153] agpgart: AGP aperture is 64M @ 0xf8000000
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
