William Case wrote: > On Thu, 2010-08-26 at 12:30 -0700, Michael Miles wrote: > >> William Case wrote: >> >>> Hi; >>> >>> I have a Hauppauge WinTv-HVR 1800 tuner with an analog Cable TV (NTSC - >>> Canada). In F12 I received a near perfect video picture from my cable >>> TV. In F13, the picture is black and white with various degrees of >>> interference lines depending on the tv channel. >>> >>> I have played with (used) TVTime quite a bit in the last 3 or 4 years so >>> I am familiar with all the menu settings and the configuration file. No >>> matter what I try, I can't get the proper reception back. >>> >>> I still have no analog sound for this tuner, but I see that as a >>> separate Alsa problem. >>> >>> Any suggestions as to what I might be overlooking or might have >>> mis-configured with the video? >>> >>> >> In the channel management section try and change the NTSC cable mode and >> see if that helps >> >> >> Michael >> > I tried that; nothing improves. > > If the manual fine tuning does not work then I don't know as I have had no problems with tvtime at all with F12. I have not switched to F13 yet because there just seems to be too many problems and I will wait for F14 as the video problems of F13 should be fixed by then,. Try XDTV and see if you can get a picture clear. It's a bit cumbersome but works and it will record I had to set the tv norm to ntsc m to get it to work Just to see if it is a problem with tvtime and F13 -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
